MICRO MOUSE BENCHMARK · DAILY MAZES

Claude Haiku 5.5 on the daily maze of 2026-10-15

Reached the dock in 25.917 s against the median person's 16.096 s on the same maze, after 44 replies and 3 wall hits. The median of 46 people who raced it was 16.096 s (the middle half 14.68 to 18.967 s, the best 13.617 s); the game's bot takes 16.325 s. All of Claude Haiku 5.5's runs.

RESULTReached the dock
TIME25.917 s
MEDIAN PERSON16.096 s
BOT16.325 s
SCORE62
WALL HITS3
REPLIES44
MODEL TIME16.8 min
COST$0.115 (API-equivalent)
TOKENS IN / OUT110,303 / 205,687
REQUESTS44
The maze and the path it droveSeen from above. The dashed line is the game's bot on the same maze. Each dot marks where a reply began.
Reply 1 at 0.000 sReply 2 at 1.000 sReply 3 at 1.500 sReply 4 at 1.817 sReply 5 at 2.317 sReply 6 at 2.817 sReply 7 at 3.517 sReply 8 at 4.067 sReply 9 at 4.367 sReply 10 at 5.167 sReply 11 at 5.667 sReply 12 at 6.267 sReply 13 at 6.767 sReply 14 at 7.350 sReply 15 at 8.350 sReply 16 at 9.250 sReply 17 at 10.250 sReply 18 at 11.150 sReply 19 at 12.050 sReply 20 at 12.600 sReply 21 at 13.200 sReply 22 at 13.450 sReply 23 at 13.650 sReply 24 at 14.250 sReply 25 at 14.750 sReply 26 at 15.033 sReply 27 at 15.283 sReply 28 at 15.783 sReply 29 at 16.283 sReply 30 at 16.783 sReply 31 at 17.583 sReply 32 at 17.883 sReply 33 at 18.183 sReply 34 at 19.133 sReply 35 at 19.633 sReply 36 at 20.433 sReply 37 at 21.033 sReply 38 at 21.633 sReply 39 at 22.133 sReply 40 at 22.633 sReply 41 at 23.033 sReply 42 at 23.283 sReply 43 at 24.233 sReply 44 at 24.983 s
Its pathThe bot's pathDockMud

Every reply

Where the robot was when the game paused, how far it still had to go, and the controls the model sent for the next stretch, with anything the game moved, cut or skipped. The run file carries an arcade-session/1 envelope. Its input tape, in the game's own format, replays this exact run at Micro Mouse commit 87bf0cb.

ReplyClock (s)Robot (x, y in cells)Controls sent
10.005.50, 2.500.00 cells/s · 30 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
I'm starting with a straight run up the dead-end column. The route to the dock goes up to the top corridor, left along row 0, down the mud column, then back through the bottom and middle rows, so the first turn is left at the top.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
21.005.50, 1.391.89 cells/s · 29 cells to go
0.25 s · throttle 1 · steer -1
0.25 s · throttle 1 · steer -1
Reply
<drive>
0.25 throttle 1 steer -1
0.25 throttle 1 steer -1
</drive>
31.505.24, 0.651.48 cells/s · 28 cells to go
0.1167 s · throttle 1 · steer -1
0.2 s · throttle 1 · steer 0
Reply
<drive>
0.12 throttle 1 steer -1
0.2 throttle 1 steer 0
</drive>
41.824.78, 0.591.48 cells/s · 27 cells to go
0.15 s · throttle 1 · steer +0.3
0.35 s · throttle 1 · steer 0
Reply
<drive>
0.15 throttle 1 steer 0.3
0.35 throttle 1 steer 0
</drive>
52.324.04, 0.581.52 cells/s · 27 cells to go
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
The robot is on the top row heading left. The route to the dock runs left along row 0, down through cell (1,1), then down the mud column at x=0, along the bottom row, and back up through the right side. This segment drives straight left to get close to the turn point.

<drive>
1.0 throttle 1 steer 0
</drive>
62.823.21, 0.551.81 cells/s · 26 cells to go
0.4 s · throttle 1 · steer 0
0.3 s · throttle 0.4 · steer 0
Reply
I'm at (3.21, 0.55) heading left along the top row. The route goes left to (1,0), turns down into (1,1), then turns left through the mud cells. For now I'll keep driving left and slow down before the turn.

<drive>
0.4 throttle 1 steer 0
0.3 throttle 0.4 steer 0
</drive>
73.521.97, 0.511.24 cells/s · 24 cells to go
0.25 s · throttle 0.7 · steer -0.5
0.3 s · throttle 0.7 · steer -1
Reply
<drive>
0.25 throttle 0.7 steer -0.5
0.3 throttle 0.7 steer -1
</drive>
84.071.44, 0.661.04 cells/s · 24 cells to go
0.3 s · throttle 0.7 · steer -1
Reply
The robot needs to pass through the gap in the wall at y = 1 and turn left into cell (1,1). Its heading of 126° points too far left, so I'm holding full left steer with throttle to swing it toward straight down.

<drive>
0.3 throttle 0.7 steer -1
</drive>
94.371.35, 0.951.04 cells/s · 24 cells to go
0.3 s · throttle 0.6 · steer +1
0.3 s · throttle 0.6 · steer +1
0.2 s · throttle 0.6 · steer +0.5
Reply
<drive>
0.3 throttle 0.6 steer 1
0.3 throttle 0.6 steer 1
0.2 throttle 0.6 steer 0.5
</drive>
105.171.47, 1.620.88 cells/s · 23 cells to go
0.3 s · throttle 0.6 · steer +1
0.2 s · throttle 0.6 · steer +0.4
1 wall hit
Reply
I'm at (1.47, 1.62) heading 115°. The 23-cell route runs left through the mud in column 0, because the top corridor is a dead end. I'll turn clockwise toward about 160° to head down-left into cell (0,1).

<drive>
0.3 throttle 0.6 steer 1
0.2 throttle 0.6 steer 0.4
</drive>
115.671.15, 1.850.87 cells/s · 23 cells to go
0.25 s · throttle 0.5 · steer -0.8
0.35 s · throttle 0.7 · steer 0
Reply
The robot is grazing the bottom wall of cell (1,1) while heading left. I'll steer left to bring the heading past 180°, which lifts it away from the wall, then drive straight through the open left side into the mud cell.

<drive>
0.25 throttle 0.5 steer -0.8
0.35 throttle 0.7 steer 0
</drive>
126.270.63, 1.941.04 cells/s · 22 cells to go
0.25 s · throttle 0.5 · steer -1
0.25 s · throttle 0.5 · steer -1
Reply
<drive>
0.25 throttle 0.5 steer -1
0.25 throttle 0.5 steer -1
</drive>
136.770.37, 2.080.45 cells/s · 21 cells to go
0.1833 s · throttle 0.5 · steer -1
0.4 s · throttle 0.8 · steer 0
Reply
<drive>
0.18 throttle 0.5 steer -1
0.4 throttle 0.8 steer 0
</drive>
147.350.38, 2.410.72 cells/s · 21 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
158.350.54, 3.290.90 cells/s · 20 cells to go
0.4 s · throttle 1 · steer +0.2
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
<drive>
0.4 throttle 1 steer 0.2
0.6 throttle 1 steer 0
</drive>
169.250.54, 4.531.61 cells/s · 19 cells to go
0.2 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer -1
0.15 s · throttle 1 · steer -1
0.15 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 1 steer 0
0.5 throttle 1 steer -1
0.15 throttle 1 steer -1
0.15 throttle 1 steer 0
</drive>
1710.251.17, 5.641.48 cells/s · 17 cells to go
0.4 s · throttle 1 · steer +0.1
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
Heading is nearly due east, slightly up, and the robot is in row 5, where the wall above it leaves little vertical room. I'll make a small right correction to level the heading, then keep throttle full straight east toward the corner at column 5.

<drive>
0.4 throttle 1 steer 0.1
0.6 throttle 1 steer 0
</drive>
1811.152.64, 5.571.87 cells/s · 16 cells to go
0.5 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
1912.054.37, 5.531.94 cells/s · 14 cells to go
0.2 s · throttle 1 · steer 0
0.35 s · throttle 1 · steer -1
Reply
<drive>
0.2 throttle 1 steer 0
0.35 throttle 1 steer -1
</drive>
2012.605.35, 5.401.53 cells/s · 13 cells to go
0.3 s · throttle 1 · steer -1
0.3 s · throttle 1 · steer -0.5
Reply
The robot is in the bottom-right corner, and the route to the dock runs up column 5, left along row 3, up column 1, right along row 2, up column 4, and left into the dock. I'll turn left toward straight up and start climbing through the gap above.

<drive>
0.3 throttle 1 steer -1
0.3 throttle 1 steer -0.5
</drive>
2113.205.46, 4.601.48 cells/s · 12 cells to go
0.25 s · throttle 1 · steer +1
Reply
<drive>
0.25 throttle 1 steer 1
</drive>
2213.455.26, 4.291.48 cells/s · 12 cells to go
0.2 s · throttle 1 · steer +1
Reply
<drive>
0.2 throttle 1 steer 1
</drive>
2313.655.16, 4.021.48 cells/s · 12 cells to go
0.3 s · throttle 1 · steer -1
0.3 s · throttle 1 · steer -1
1 wall hit
Reply
Going straight up from here leads into cell (5,3), which opens left onto a clear row-3 corridor toward (1,3), then up to (1,2) and across to the dock. So I'll steer left while driving, which should carry the robot through that opening.

<drive>
0.3 throttle 1 steer -1
0.3 throttle 1 steer -1
</drive>
2414.255.29, 3.150.28 cells/s · 11 cells to go
0.5 s · throttle 0 · steer -1
1 moved into range
Reply
The robot is in cell (5,3), facing up and left toward the top wall. I'll pivot in place to face left (180°), which won't move it toward a wall. Then I'll drive left along the row toward (4,3).

<drive>
0.55 steer -1
</drive>
2514.755.28, 3.150.00 cells/s · 11 cells to go
0.0833 s · throttle 0.3 · steer -1
0.2 s · throttle 0.8 · steer 0
Reply
<drive>
0.08 throttle 0.3 steer -1
0.2 throttle 0.8 steer 0
</drive>
2615.035.19, 3.160.65 cells/s · 11 cells to go
0.25 s · throttle 0.8 · steer -1
Reply
<drive>
0.25 throttle 0.8 steer -1
</drive>
2715.284.96, 3.211.18 cells/s · 10 cells to go
0.2 s · throttle 0.8 · steer +1
0.3 s · throttle 0.8 · steer 0
Reply
I'm steering back toward 180° (due left) so the robot runs west along row 3 with the walls clear, then I'll turn north at column 1 toward the dock route.

<drive>
0.2 throttle 0.8 steer 1
0.3 throttle 0.8 steer 0
</drive>
2815.784.52, 3.591.18 cells/s · 10 cells to go
0.3 s · throttle 0.5 · steer +1
0.2 s · throttle 0.5 · steer 0
Reply
The robot is heading down-left toward the bottom wall of row 3, so I'll steer right to swing it toward 180° (left) while easing off the throttle to keep the turn tight.

<drive>
0.3 throttle 0.5 steer 1
0.2 throttle 0.5 steer 0
</drive>
2916.284.17, 3.790.74 cells/s · 10 cells to go
0.15 s · throttle 0.8 · steer +0.6
0.35 s · throttle 1 · steer 0
Reply
<drive>
0.15 throttle 0.8 steer 0.6
0.35 throttle 1 steer 0
</drive>
3016.783.55, 3.811.50 cells/s · 9 cells to go
0.5 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer +1
1 moved into range
Reply
I'm heading left along row 3, then turning up into cell (1,3) and continuing toward the dock through (1,2), (2,2), (3,2), (4,2), (4,1), and (3,1).

<drive>
0.7 throttle 1 steer 0
0.3 throttle 1 steer 1
</drive>
3117.582.25, 3.731.48 cells/s · 8 cells to go
0.3 s · throttle 1 · steer -1
Reply
<drive>
0.3 throttle 1 steer -1
</drive>
3217.881.93, 3.431.48 cells/s · 7 cells to go
0.3 s · throttle 1 · steer +1
Reply
Turning right toward the corridor at row 2. The route is up into (1,2), then right along row 2, up at column 4, and left into the dock.

<drive>
0.3 throttle 1 steer 1
</drive>
3318.181.67, 3.071.48 cells/s · 7 cells to go
0.35 s · throttle 1 · steer +1
0.25 s · throttle 1 · steer +1
0.35 s · throttle 1 · steer 0
Reply
<drive>
0.35 throttle 1 steer 1
0.25 throttle 1 steer 1
0.35 throttle 1 steer 0
</drive>
3419.132.53, 2.371.48 cells/s · 5 cells to go
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
<drive>
0.6 throttle 1 steer 0
</drive>
3519.633.34, 2.431.75 cells/s · 4 cells to go
0.3 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer +1
Reply
<drive>
0.3 throttle 1 steer 0
0.5 throttle 1 steer 1
</drive>
3620.434.62, 2.771.48 cells/s · 3 cells to go
0.3 s · throttle 0 · reverse 1 · steer -1
0.3 s · throttle 0.3 · steer -1
1 wall hit
Reply
<drive>
0.3 reverse 1 steer -1
0.3 throttle 0.3 steer -1
</drive>
3721.034.66, 2.800.32 cells/s · 3 cells to go
0.1 s · brake · steer 0
0.5 s · throttle 0 · steer -1
1 moved into range
Reply
The robot is in the bottom-right of cell (4,2), with the bottom and right walls close. The route to the dock goes up through (4,1), then left through (3,1) to (2,1). I'll stop the forward motion and pivot left so the heading turns toward the up-left direction.

<drive>
0.1 brake
0.9 throttle 0 steer -1
</drive>
3821.634.67, 2.810.00 cells/s · 3 cells to go
0.5 s · throttle 0 · steer -1
Reply
The robot is in cell (4,2), facing roughly right. The route to the dock runs up through the gap into (4,1), then left along row 1 to (2,1). Since the robot is stationary, I'll pivot left (anticlockwise) to face up before driving.

<drive>
0.5 throttle 0 steer -1
</drive>
3922.134.67, 2.810.00 cells/s · 3 cells to go
0.5 s · throttle 0 · steer +1
Reply
The robot is facing east (about -3°) and needs to face up. In the last reply, steer -1 increased the heading, so steer +1 should turn it back toward -90°. I'll pivot in place with steer +1 and check the heading before moving on.

<drive>
0.5 throttle 0 steer 1
</drive>
4022.634.67, 2.810.00 cells/s · 3 cells to go
0.4 s · throttle 0 · steer -1
Reply
The robot is in cell (4,2), facing up-right, and the route to the dock runs up through (4,1), then left through (3,1) into the dock at (2,1). I'll pivot left in place to face straight up before driving forward.

<drive>
0.4 throttle 0 steer -1
</drive>
4123.034.67, 2.810.00 cells/s · 3 cells to go
0.25 s · throttle 0 · steer -1
Reply
<drive>
0.25 throttle 0 steer -1
</drive>
4223.284.67, 2.810.00 cells/s · 3 cells to go
0.15 s · throttle 0 · steer 0
0.5 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.15 throttle 0 steer 0
0.5 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
4324.234.70, 2.061.77 cells/s · 3 cells to go
0.25 s · throttle 1 · steer -1
0.4 s · throttle 1 · steer -1
0.1 s · throttle 1 · steer 0
Reply
<drive>
0.25 throttle 1 steer -1
0.4 throttle 1 steer -1
0.1 throttle 1 steer 0
</drive>
4424.984.13, 1.271.48 cells/s · 2 cells to go
0.2 s · throttle 1 · steer +0.7
0.4 s · throttle 1 · steer 0
0.2 s · throttle 1 · steer -0.5
0.2 s · throttle 1 · steer 0
1 cut at the one-second limit
Reply
<drive>
0.2 throttle 1 steer 0.7
0.4 throttle 1 steer 0
0.2 throttle 1 steer -0.5
0.3 throttle 1 steer 0
</drive>