MICRO MOUSE BENCHMARK · NIGHT SHIFT

Claude Haiku 5.5 on Night Shift maze 1 (level 4-6)

Reached the dock in 56.358 s against the bot's 28.542 s on the same maze, after 89 replies and 15 wall hits. All of Claude Haiku 5.5's runs.

RESULTReached the dock
TIME56.358 s
BOT28.542 s
SCORE51
WALL HITS15
REPLIES89
MODEL TIME35.7 min
COST$0.249 (API-equivalent)
TOKENS IN / OUT242,161 / 442,473
REQUESTS89
The maze and the path it droveSeen from above. The dashed line is the game's bot on the same maze. Each dot marks where a reply began.
Reply 1 at 0.000 sReply 2 at 1.000 sReply 3 at 2.000 sReply 4 at 3.000 sReply 5 at 4.000 sReply 6 at 4.400 sReply 7 at 4.900 sReply 8 at 5.100 sReply 9 at 5.600 sReply 10 at 6.100 sReply 11 at 6.400 sReply 12 at 6.650 sReply 13 at 7.100 sReply 14 at 7.900 sReply 15 at 8.650 sReply 16 at 9.650 sReply 17 at 10.150 sReply 18 at 10.950 sReply 19 at 11.250 sReply 20 at 12.050 sReply 21 at 12.600 sReply 22 at 13.250 sReply 23 at 14.150 sReply 24 at 15.150 sReply 25 at 16.150 sReply 26 at 16.750 sReply 27 at 17.200 sReply 28 at 17.450 sReply 29 at 17.950 sReply 30 at 18.783 sReply 31 at 19.283 sReply 32 at 19.883 sReply 33 at 20.733 sReply 34 at 21.233 sReply 35 at 21.733 sReply 36 at 22.133 sReply 37 at 22.933 sReply 38 at 23.733 sReply 39 at 24.733 sReply 40 at 25.733 sReply 41 at 26.733 sReply 42 at 27.533 sReply 43 at 28.033 sReply 44 at 29.033 sReply 45 at 29.833 sReply 46 at 30.833 sReply 47 at 31.383 sReply 48 at 31.783 sReply 49 at 32.583 sReply 50 at 32.933 sReply 51 at 33.633 sReply 52 at 34.333 sReply 53 at 35.033 sReply 54 at 35.833 sReply 55 at 36.500 sReply 56 at 37.150 sReply 57 at 37.800 sReply 58 at 38.150 sReply 59 at 38.650 sReply 60 at 39.650 sReply 61 at 39.950 sReply 62 at 40.800 sReply 63 at 41.300 sReply 64 at 41.800 sReply 65 at 42.100 sReply 66 at 42.600 sReply 67 at 43.400 sReply 68 at 43.650 sReply 69 at 43.950 sReply 70 at 44.450 sReply 71 at 44.850 sReply 72 at 45.850 sReply 73 at 46.350 sReply 74 at 46.850 sReply 75 at 47.183 sReply 76 at 47.883 sReply 77 at 48.583 sReply 78 at 49.483 sReply 79 at 50.233 sReply 80 at 51.083 sReply 81 at 51.883 sReply 82 at 52.383 sReply 83 at 53.083 sReply 84 at 53.583 sReply 85 at 54.583 sReply 86 at 54.783 sReply 87 at 55.283 sReply 88 at 55.783 sReply 89 at 56.283 s
Its pathThe bot's pathDockIceMud

Every reply

Where the robot was when the game paused, how far it still had to go, and the controls the model sent for the next stretch, with anything the game moved, cut or skipped. The run file carries an arcade-session/1 envelope. Its input tape, in the game's own format, replays this exact run at Micro Mouse commit 87bf0cb.

ReplyClock (s)Robot (x, y in cells)Controls sent
10.007.50, 7.500.00 cells/s · 53 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
Starting from the bottom-right corner, the only exit is west along row 7 to column 0, then north. I'll accelerate left first.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
21.006.39, 7.501.89 cells/s · 52 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
The robot is in the bottom corridor, and the only way out is to go left to column 0, then up. I'll hold full throttle straight left for this second and reassess before the ice at x < 1.78.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
32.004.45, 7.501.94 cells/s · 50 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
I'm driving straight left for the first second. The only way out of this corridor is up column 0, so I'll keep full throttle now and plan the turn at the far end.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
43.002.51, 7.501.94 cells/s · 48 cells to go
0.5 s · brake · steer 0
0.5 s · throttle 0 · steer +1
1 moved into range
Reply
The robot is heading left, but the way to the dock is to the right, through row 7, then up and around. I'll brake to a stop just inside cell (2,7), then pivot clockwise to face right.

<drive>
0.5 brake
1.0 steer 1
</drive>
54.002.08, 7.500.00 cells/s · 48 cells to go
0.4 s · throttle 0 · steer -1
Reply
The robot is at (2.08, 7.50) facing up-left with the wheel still turned right. I need to pivot left to face west along the bottom corridor, so I'll hold full left steer with no throttle.

<drive>
0.4 throttle 0 steer -1
</drive>
64.402.08, 7.500.00 cells/s · 48 cells to go
0.5 s · throttle 0 · steer -1
Reply
The robot is still pointing up-left at -135 degrees and has no speed. The route to the dock runs left along the bottom row to the only exit at (0,7), then up column 0 and around the top and right side. I'll pivot left toward 180 degrees first so the robot doesn't drive into the wall above it.

<drive>
0.5 throttle 0 steer -1
</drive>
74.902.08, 7.500.00 cells/s · 48 cells to go
0.2 s · throttle 0 · steer -1
Reply
The last result says the robot ended at heading -127, which conflicts with the 177 shown in the current state. I'll pivot a short amount to find out which reading is right before committing to a longer move.

<drive>
0.2 throttle 0 steer -1
</drive>
85.102.08, 7.500.00 cells/s · 48 cells to go
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
I'm in the bottom row, facing left. The route is left to the corner cell (0,7), up column 0 to (0,6), right into (1,6), up through (1,5) to row 4, along row 4 to (5,4), then down and back left to the dock. I'll drive straight left first and turn once I'm closer to column 0.

<drive>
0.7 throttle 1 steer 0
</drive>
95.601.84, 7.671.16 cells/s · 47 cells to go
0.25 s · throttle 1 · steer +1
0.25 s · throttle 1 · steer 0
1 wall hit
Reply
I'm at (1.84, 7.67) heading 145°, which points down into the bottom wall. The route goes left along row 7 and then up column 0 through the mud. First I'll turn clockwise toward 180° (left) and drive on.

<drive>
0.25 throttle 1 steer 1
0.25 throttle 1 steer 0
</drive>
106.101.19, 7.851.48 cells/s · 47 cells to go
0.3 s · throttle 1 · steer +1
Reply
The robot is at x 1.19, heading left at 1.48 cells/s, and the only way out of this cell is left into (0,7). From there the route runs up the x=0 column (through mud at rows 3 to 5) toward row 0. I'll start a right (clockwise) turn now so the robot curves up before it reaches the left wall.

<drive>
0.3 throttle 1 steer 1
</drive>
116.400.75, 7.821.51 cells/s · 46 cells to go
0.25 s · throttle 0.5 · steer -1
Reply
The robot is on ice, sliding up-left toward the outer wall at x 0.15. My last steer right turned the heading the wrong way, so I'll steer left, which should bring the heading back toward up (-90) and into the column 0 corridor. I'll keep throttle moderate and check the result before committing further.

<drive>
0.25 throttle 0.5 steer -1
</drive>
126.650.50, 7.690.79 cells/s · 46 cells to go
0.3 s · throttle 0.8 · steer +1
0.15 s · throttle 0.8 · steer 0
Reply
The robot is in the bottom-left corner, heading up-left toward the left wall. The only way out is up into cell (0,6), so I need to swing the nose from about -133° to roughly -90° (straight up) without hitting the left wall.

<drive>
0.3 throttle 0.8 steer 1
0.15 throttle 0.8 steer 0
</drive>
137.100.25, 7.261.19 cells/s · 46 cells to go
0.3 s · throttle 1 · steer +0.3
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
The robot is in the bottom-left corner. The only exit from the bottom row is up column 0, so I'll drive up that corridor and steer slightly right to correct the leftward drift (heading -102). Column 0 has mud at y 3.9 to 5.3, which will cap speed there.

<drive>
0.3 throttle 1 steer 0.3
0.7 throttle 1 steer 0
</drive>
147.900.38, 6.091.61 cells/s · 45 cells to go
0.25 s · throttle 1 · steer -0.3
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
I'm at (0.38, 6.09) heading -80°, and the only exit from this cell is up the left column. The route goes up through the mud to the top-left corner, then right across the top and back down toward the dock. This segment corrects my heading toward straight up, since the -80° drift would carry me into the wall over the next few cells.

<drive>
0.25 throttle 1 steer -0.3
0.6 throttle 1 steer 0
</drive>
158.650.41, 5.060.90 cells/s · 44 cells to go
0.25 s · brake · steer +1
0.5 s · throttle 0 · steer +1
0.25 s · throttle 0 · steer +1
Reply
The robot is heading up the column, but the dock is reached by going down and around through row 7 and row 6, so I'll brake to a stop and pivot to face down.

<drive>
0.25 brake steer 1
0.5 steer 1
0.25 steer 1
</drive>
169.650.41, 4.970.00 cells/s · 43 cells to go
0.5 s · throttle 0 · steer +1
1 moved into range
Reply
I'm pivoting right to turn the robot from heading 12° to face down (about 90°). The route goes down the mud column to row 6, then right, then up and across to the dock.

<drive>
0.6 throttle 0 steer 1
</drive>
1710.150.41, 4.970.00 cells/s · 43 cells to go
0.5 s · throttle 0 · steer -1
0.3 s · throttle 0 · steer -1
Reply
I'm at the start of the mud strip, heading 71°, with the wheel at full right. From this cell the only exit is up the column: the cells below lead into a dead-end ice row. So I need to pivot left to face north, then drive up.

<drive>
0.5 throttle 0 steer -1
0.3 throttle 0 steer -1
</drive>
1810.950.41, 4.970.00 cells/s · 43 cells to go
0.3 s · throttle 0 · steer +1
Reply
The robot is in the mud at (0.41, 4.97) and stopped. The only open exits from this cell are up and down, and the route to the dock goes up column 0. Heading 71 is facing down. Last reply, steer -1 raised the heading, which doesn't match the stated "left" turn. I'll pivot in place with steer +1 to find out which way the heading moves before driving.

<drive>
0.3 throttle 0 steer 1
</drive>
1911.250.41, 4.970.00 cells/s · 43 cells to go
0.5 s · throttle 0 · steer -1
0.3 s · throttle 0 · steer -1
Reply
I'm in column 0, which is a corridor from the top row down to the bottom. The route to the dock goes up this corridor, across the top row, and around the loop. Next I'll pivot left to face up, since the robot is currently pointing down-right.

<drive>
0.5 throttle 0 steer -1
0.3 throttle 0 steer -1
</drive>
2012.050.41, 4.970.00 cells/s · 43 cells to go
0.35 s · throttle 0 · steer -1
0.2 s · throttle 1 · steer 0
Reply
The robot is stopped in mud, facing -52 degrees, with the wheel still at full left. The only way out of this cell is up the left column (cells (0,0) to (0,4)), so I need to turn to face straight up (-90) before driving. I'll pivot left, then straighten out and start throttle.

<drive>
0.35 throttle 0 steer -1
0.2 throttle 1 steer 0
</drive>
2112.600.40, 4.940.24 cells/s · 43 cells to go
0.25 s · throttle 1 · steer +0.2
0.4 s · throttle 1 · steer 0
Reply
<drive>
0.25 throttle 1 steer 0.2
0.4 throttle 1 steer 0
</drive>
2213.250.36, 4.540.90 cells/s · 43 cells to go
0.4 s · throttle 1 · steer +0.15
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
I'm heading up the left column, which is mud for the first stretch. The robot is at x 0.36 and drifting left at -95°, so I'm nudging the steer right to bring the heading back toward -90° before the wall.

<drive>
0.4 throttle 1 steer 0.15
0.6 throttle 1 steer 0
</drive>
2314.150.40, 3.601.53 cells/s · 42 cells to go
0.35 s · brake · steer 0
0.5 s · throttle 0 · steer +1
0.15 s · throttle 0 · steer +1
Reply
Heading is -86 (up the column), but the dock route runs down column 0, then along the bottom row, then back up through the centre. I'll brake to a stop, then pivot clockwise to face down.

<drive>
0.35 brake steer 0
0.5 steer 1
0.15 steer 1
</drive>
2415.150.42, 3.330.00 cells/s · 42 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
1 wall hit
Reply
The robot is pointing up and nearly still, and the only route to the dock runs up this column and then along the top row. I'll accelerate straight up for the first second.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
2516.150.85, 3.190.03 cells/s · 42 cells to go
0.45 s · throttle 0 · steer -1
0.15 s · throttle 0 · steer 0
Reply
Heading is -15 degrees, so the robot is angled toward the right wall. The route goes up column 0 to the top row, so I'll pivot left to face up before driving.

<drive>
0.45 throttle 0 steer -1
0.15 throttle 0 steer 0
</drive>
2616.750.85, 3.190.00 cells/s · 42 cells to go
0.45 s · throttle 0 · steer -1
Reply
Pivoting left on the spot to point up the column before driving. Robot is at heading -62 and the open route goes north.

<drive>
0.45 throttle 0 steer -1
</drive>
2717.200.85, 3.190.00 cells/s · 42 cells to go
0.25 s · throttle 0 · steer -1
Reply
The robot is stationary at heading -62, and the route goes straight up the x≈0.5 corridor before turning right along the top row. Heading -62 would run into the wall on the right, so I'll pivot left toward -90 first, with no throttle.

<drive>
0.25 throttle 0 steer -1
</drive>
2817.450.85, 3.190.00 cells/s · 42 cells to go
0.5 s · throttle 0 · steer +1
Reply
The route to the dock runs up the left column to the top row, across to the right side, then back through the middle. The robot is facing up-left at -130°, so I need to turn right toward straight up (-90°) before driving. I'll pivot in place first.

<drive>
0.5 throttle 0 steer 1
</drive>
2917.950.85, 3.190.00 cells/s · 42 cells to go
0.3333 s · throttle 0 · steer +1
0.5 s · throttle 1 · steer 0
2 wall hits1 moved into range
Reply
<drive>
0.33 throttle 0 steer 1
0.6 throttle 1 steer 0
</drive>
3018.780.85, 2.930.84 cells/s · 41 cells to go
0.5 s · throttle 1 · steer -0.4
Reply
I'm starting with a short push straight up the left column, steering slightly left to correct the heading and move away from the right-hand wall.

<drive>
0.5 throttle 1 steer -0.4
</drive>
3119.280.78, 2.301.48 cells/s · 41 cells to go
0.25 s · throttle 1 · steer +0.6
0.35 s · throttle 1 · steer 0
Reply
<drive>
0.25 throttle 1 steer 0.6
0.35 throttle 1 steer 0
</drive>
3219.880.51, 1.461.50 cells/s · 40 cells to go
0.35 s · brake · steer +1
0.5 s · throttle 0 · steer +1
Reply
Braking and then pivoting right should turn the robot around to head back down column 0 toward the mud corridor.

<drive>
0.35 brake steer 1
0.5 steer 1
</drive>
3320.730.48, 1.200.00 cells/s · 40 cells to go
0.5 s · throttle 0 · steer -1
1 moved into range
Reply
I'm at cell (0,1), facing about -13°, with a wall to the east. The route goes up to (0,0), then east along row 0, so first I'll pivot left in place to face up.

<drive>
0.7 throttle 0 steer -1
</drive>
3421.230.48, 1.200.00 cells/s · 40 cells to go
0.5 s · throttle 0 · steer -1
1 moved into range
Reply
The robot is at (0, 1) facing almost straight right into the wall. The only exit from this cell is up to (0, 0), so I'll pivot left to face up first.

<drive>
0.6 throttle 0 steer -1
</drive>
3521.730.48, 1.200.00 cells/s · 40 cells to go
0.4 s · throttle 0 · steer +1
Reply
I'm turning the robot north to go up column 0 to row 0, then east along the top corridor.

<drive>
0.4 throttle 0 steer 1
</drive>
3622.130.48, 1.200.00 cells/s · 40 cells to go
0.3 s · throttle 1 · steer -0.1
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.3 throttle 1 steer -0.1
0.5 throttle 1 steer 0
</drive>
3722.930.63, 0.481.73 cells/s · 39 cells to go
0.3 s · brake · steer +1
0.2 s · throttle 0.6 · steer +1
0.3 s · throttle 1 · steer +0.5
2 wall hits
Reply
I'm turning right now because the robot is heading almost straight up, about 0.3 cells from the top wall. Braking while steering sheds speed so the turn stays tight.

<drive>
0.3 brake steer 1
0.2 throttle 0.6 steer 1
0.3 throttle 1 steer 0.5
</drive>
3823.730.95, 0.150.70 cells/s · 39 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
Heading is due east along the top row, with the wheel still turned right. I'll straighten the wheel and accelerate along row 0 toward the east end of the corridor.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
3924.732.38, 0.171.78 cells/s · 37 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
Heading 1° along the top corridor, so I'll keep straight east toward the right-hand turn at the end of row 0.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
4025.734.30, 0.201.94 cells/s · 35 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
The robot is in the top corridor at x 4.30. The route runs right to the far corner, down, then back left and around to the dock. I'll drive straight for another second so it can reach the corner before turning.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
4126.736.24, 0.221.94 cells/s · 33 cells to go
0.3 s · throttle 1 · steer 0
0.25 s · throttle 1 · steer +1
0.25 s · throttle 1 · steer +0.5
Reply
<drive>
0.30 throttle 1 steer 0
0.25 throttle 1 steer 1
0.25 throttle 1 steer 0.5
</drive>
4227.537.58, 0.481.48 cells/s · 32 cells to go
0.3 s · throttle 1 · steer +1
0.2 s · throttle 1 · steer 0
Reply
I'm steering the robot right to bring it from heading 48° to heading 90°, so it goes down through the open south side of this cell. Its x position is close to the east wall, so I'm keeping the first segment short.

<drive>
0.3 throttle 1 steer 1
0.2 throttle 1 steer 0
</drive>
4328.037.71, 1.171.48 cells/s · 31 cells to go
0.3 s · throttle 1 · steer +1
0.2 s · throttle 1 · steer +1
0.2 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.3 throttle 1 steer 1
0.2 throttle 1 steer 1
0.2 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
4429.036.55, 1.751.55 cells/s · 30 cells to go
0.5 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
1 moved into range
Reply
<drive>
0.6 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
4529.835.13, 1.741.94 cells/s · 29 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
4630.833.19, 1.731.94 cells/s · 27 cells to go
0.3 s · brake · steer 0
0.25 s · throttle 0.25 · steer 0
Reply
<drive>
0.3 brake
0.25 throttle 0.25 steer 0
</drive>
4731.382.70, 1.730.37 cells/s · 26 cells to go
0.4 s · throttle 0.8 · steer 0
Reply
I'm sending the first segment to accelerate left along row 1 toward the corridor at x≈1.5, where I'll turn down toward (1,2).

<drive>
0.4 throttle 0.8 steer 0
</drive>
4831.782.36, 1.721.18 cells/s · 26 cells to go
0.3 s · brake · steer 0
0.5 s · throttle 0 · steer -1
1 moved into range
Reply
I'm braking to a stop, then pivoting left to face down toward the corridor at row 2.

<drive>
0.3 brake
0.7 steer -1
</drive>
4932.582.21, 1.720.00 cells/s · 26 cells to go
0.35 s · throttle 0 · steer +1
Reply
I'm at (2.21, 1.72) with the wheel hard left and no speed. The route to the dock runs left into cell (1,1), then down the left side and back across, so I need to turn from heading 136 to about 180. Pivoting in place with no throttle should do it.

<drive>
0.35 throttle 0 steer 1
</drive>
5032.932.21, 1.720.00 cells/s · 26 cells to go
0.4 s · throttle 0 · steer -1
0.3 s · throttle 0.4 · steer -0.6
Reply
<drive>
0.4 throttle 0 steer -1
0.3 throttle 0.4 steer -0.6
</drive>
5133.632.21, 1.830.60 cells/s · 26 cells to go
0.5 s · throttle 0.7 · steer -1
0.2 s · throttle 0.7 · steer -0.4
Reply
<drive>
0.5 throttle 0.7 steer -1
0.2 throttle 0.7 steer -0.4
</drive>
5234.332.72, 2.161.04 cells/s · 25 cells to go
0.2 s · throttle 0.7 · steer +1
0.2 s · throttle 0.8 · steer +0.2
0.3 s · throttle 0.8 · steer 0
2 wall hits
Reply
Heading is -11° with the wheel still at -0.41, so the robot is drifting up toward the top wall at y 2 while it has to run east along row 2. I'll steer right to straighten out and move it down to the corridor centre at y 2.5.

<drive>
0.2 throttle 0.7 steer 1
0.2 throttle 0.8 steer 0.2
0.3 throttle 0.8 steer 0
</drive>
5335.033.21, 2.150.96 cells/s · 24 cells to go
0.25 s · throttle 1 · steer +0.4
0.25 s · throttle 1 · steer +0.1
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.25 throttle 1 steer 0.4
0.25 throttle 1 steer 0.1
0.3 throttle 1 steer 0
</drive>
5435.834.33, 2.341.61 cells/s · 23 cells to go
0.1667 s · throttle 1 · steer -1
0.1 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
The robot is heading 14° and would hit the lower wall of the row-2 corridor if it kept going, so I'll straighten it first, then keep driving east.

<drive>
0.17 throttle 1 steer -1
0.1 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
5536.505.32, 2.411.58 cells/s · 22 cells to go
0.5 s · throttle 1 · steer 0
0.15 s · throttle 1 · steer +1
1 moved into range
Reply
<drive>
0.85 throttle 1 steer 0
0.15 throttle 1 steer 1
</drive>
5637.156.46, 2.411.72 cells/s · 21 cells to go
0.2 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer +1
0.15 s · throttle 1 · steer +0.3
Reply
Turning into column 7 needs to start around x 6.9, and the robot is at x 6.46 moving about 1.72 cells/s. I'll drive straight briefly, then steer right through the corner.

<drive>
0.2 throttle 1 steer 0
0.3 throttle 1 steer 1
0.15 throttle 1 steer 0.3
</drive>
5737.807.36, 2.781.48 cells/s · 20 cells to go
0.25 s · throttle 1 · steer +0.8
0.1 s · throttle 1 · steer 0
Reply
The robot is at (7,2) heading 59° toward the right wall, so I need to turn right and head down column 7 toward (7,6).

<drive>
0.25 throttle 1 steer 0.8
0.1 throttle 1 steer 0
</drive>
5838.157.48, 3.271.48 cells/s · 19 cells to go
0.15 s · throttle 1 · steer -0.4
0.35 s · throttle 1 · steer 0
Reply
<drive>
0.15 throttle 1 steer -0.4
0.35 throttle 1 steer 0
</drive>
5938.657.46, 4.011.51 cells/s · 18 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
6039.657.48, 5.791.94 cells/s · 17 cells to go
0.3 s · throttle 1 · steer -1
Reply
The robot is heading down the right-hand corridor at about 1.94 cells/s. The next open turn is left into cell (6,6), so I'll start steering left now to swing through the corner while keeping throttle on. I'll send a short segment and check the heading before committing further.

<drive>
0.3 throttle 1 steer -1
</drive>
6139.957.55, 6.311.59 cells/s · 16 cells to go
0.35 s · brake · steer +1
0.5 s · throttle 0 · steer +1
Reply
I'm in the bottom-right corner, moving down-right at 1.59 cells/s with a wall close below and to the right. I need to end up heading left (180°), which takes a 121° clockwise turn. I'll brake first so I don't hit the bottom wall, then pivot right.

<drive>
0.35 brake steer 1
0.5 steer 1
</drive>
6240.807.73, 6.520.00 cells/s · 16 cells to go
0.5 s · throttle 0 · steer +1
Reply
I'm pivoting right to turn the robot from heading 97 toward the left-facing corridor. The route is 16 cells: left along row 6, up column 1, right along row 4, down at column 5, left along row 5 to the dock.

<drive>
0.5 throttle 0 steer 1
</drive>
6341.307.73, 6.520.00 cells/s · 16 cells to go
0.5 s · throttle 0 · steer +1
1 moved into range
Reply
<drive>
0.6 throttle 0 steer 1
</drive>
6441.807.73, 6.520.00 cells/s · 16 cells to go
0.3 s · throttle 0 · steer -1
Reply
Heading is -146° and the route runs left along row 6, so I'll pivot anticlockwise toward 180° without throttle first.

<drive>
0.3 throttle 0 steer -1
</drive>
6542.107.73, 6.520.00 cells/s · 16 cells to go
0.3 s · throttle 0 · steer -1
0.2 s · throttle 0.4 · steer 0
Reply
<drive>
0.3 throttle 0 steer -1
0.2 throttle 0.4 steer 0
</drive>
6642.607.69, 6.510.46 cells/s · 16 cells to go
0.25 s · throttle 0.8 · steer -1
0.25 s · throttle 1 · steer -0.4
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.25 throttle 0.8 steer -1
0.25 throttle 1 steer -0.4
0.3 throttle 1 steer 0
</drive>
6743.406.81, 6.801.48 cells/s · 15 cells to go
0.25 s · throttle 1 · steer +0.8
1 wall hit
Reply
<drive>
0.25 throttle 1 steer 0.8
</drive>
6843.656.55, 6.850.95 cells/s · 15 cells to go
0.15 s · throttle 1 · steer 0
0.15 s · throttle 1 · steer -0.2
1 wall hit
Reply
<drive>
0.15 throttle 1 steer 0
0.15 throttle 1 steer -0.2
</drive>
6943.956.20, 6.851.27 cells/s · 15 cells to go
0.15 s · throttle 1 · steer +0.4
0.15 s · throttle 1 · steer +0.1
0.2 s · throttle 1 · steer 0
1 wall hit
Reply
The robot is pressed against the bottom wall (y 6.85) and still heading down-left at 171°. I need to steer right to bring the heading to about 181–184°, which lifts it toward the centre line of row 6 before it runs left along the corridor.

<drive>
0.15 throttle 1 steer 0.4
0.15 throttle 1 steer 0.1
0.2 throttle 1 steer 0
</drive>
7044.455.49, 6.851.48 cells/s · 14 cells to go
0.2 s · throttle 1 · steer +0.5
0.2 s · throttle 1 · steer -0.2
Reply
<drive>
0.2 throttle 1 steer 0.5
0.2 throttle 1 steer -0.2
</drive>
7144.854.90, 6.781.48 cells/s · 13 cells to go
0.35 s · brake · steer 0
0.25 s · throttle 0 · steer +1
0.4 s · throttle 0 · steer +1
Reply
Speed is 1.48 cells/s heading left, and the route to the dock goes back right through (5,6), then up to (5,5), then left along row 5. I'll brake to a stop, then pivot clockwise to turn around.

<drive>
0.35 brake steer 0
0.25 steer 1
0.4 steer 1
</drive>
7245.854.66, 6.730.00 cells/s · 13 cells to go
0.5 s · throttle 0 · steer -1
Reply
The robot is at (4.66, 6.73) facing -106°, and the route to the dock runs left along row 6, up column 1, right along row 4, then down and left into the dock. It needs to face 180° first, so I'll pivot left in place before driving.

<drive>
0.5 throttle 0 steer -1
</drive>
7346.354.66, 6.730.00 cells/s · 13 cells to go
0.5 s · throttle 0 · steer -1
Reply
The robot is in cell (4,6) facing up-left with no speed. The route to the dock runs left along row 6, up column 1, right along row 4, down through (5,4) and (5,5), then left to the dock: 13 cells. The first step is to pivot left to face west.

<drive>
0.5 throttle 0 steer -1
</drive>
7446.854.66, 6.730.00 cells/s · 13 cells to go
0.0833 s · throttle 0 · steer -1
0.25 s · throttle 0.5 · steer 0
Reply
<drive>
0.08 throttle 0 steer -1
0.25 throttle 0.5 steer 0
</drive>
7547.184.58, 6.730.58 cells/s · 13 cells to go
0.3 s · throttle 1 · steer -0.3
0.4 s · throttle 1 · steer 0
1 wall hit
Reply
<drive>
0.3 throttle 1 steer -0.3
0.4 throttle 1 steer 0
</drive>
7647.883.80, 6.851.19 cells/s · 12 cells to go
0.2 s · throttle 1 · steer +1
0.1 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
1 wall hit
Reply
<drive>
0.2 throttle 1 steer 1
0.1 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
7748.582.83, 6.801.48 cells/s · 11 cells to go
0.4 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer +1
Reply
<drive>
0.4 throttle 1 steer 0
0.5 throttle 1 steer 1
</drive>
7849.481.53, 6.451.48 cells/s · 10 cells to go
0.15 s · throttle 1 · steer +1
0.25 s · throttle 1 · steer 0
0.35 s · throttle 1 · steer 0
Reply
<drive>
0.15 throttle 1 steer 1
0.25 throttle 1 steer 0
0.35 throttle 1 steer 0
</drive>
7950.231.68, 5.361.61 cells/s · 9 cells to go
0.2 s · throttle 1 · steer -0.6
0.15 s · throttle 0.6 · steer 0
0.5 s · throttle 0.5 · steer +1
Reply
The robot is in a vertical corridor at (1,5) and needs to go up to row 4, east to column 5, then back down and west to the dock. It is heading -75°, so it must straighten up before turning right, or it will hit the wall at x=2.

<drive>
0.2 throttle 1 steer -0.6
0.15 throttle 0.6 steer 0
0.5 throttle 0.5 steer 1
</drive>
8051.081.84, 4.490.74 cells/s · 8 cells to go
0.3 s · throttle 0.8 · steer +1
0.2 s · throttle 0.9 · steer +0.4
0.3 s · throttle 1 · steer 0
Reply
Heading is -38° and the wall above row 4 is close, so I'll steer right to level out before the corridor.

<drive>
0.3 throttle 0.8 steer 1
0.2 throttle 0.9 steer 0.4
0.3 throttle 1 steer 0
</drive>
8151.882.76, 4.691.48 cells/s · 7 cells to go
0.2 s · throttle 1 · steer -0.8
0.3 s · throttle 1 · steer 0
1 wall hit
Reply
The robot is heading down-right at 30°, close to the bottom wall of cell (2,4). The route to the dock runs east through (3,4) and (4,4), down into (5,4), then back west along row 5. First I need to level the heading toward east, so I'm steering left briefly and then driving straight.

<drive>
0.2 throttle 1 steer -0.8
0.3 throttle 1 steer 0
</drive>
8252.383.44, 4.851.49 cells/s · 6 cells to go
0.2 s · throttle 1 · steer -0.4
0.3 s · throttle 1 · steer 0
0.2 s · throttle 1 · steer 0
Reply
I'm steering up slightly to correct the robot's drift toward the bottom wall, then driving straight along the row toward the corner at x 5.

<drive>
0.2 throttle 1 steer -0.4
0.3 throttle 1 steer 0
0.2 throttle 1 steer 0
</drive>
8353.084.48, 4.811.60 cells/s · 5 cells to go
0.3 s · throttle 1 · steer 0
0.2 s · throttle 1 · steer +0.6
Reply
I'll drive straight right for 0.3 s, then start turning clockwise into the opening below cell (5,4). The route is then (5,4), (5,5), left through (4,5) and (3,5) to the dock. I'll check the state after this stretch before committing to the rest of the turn.

<drive>
0.3 throttle 1 steer 0
0.2 throttle 1 steer 0.6
</drive>
8453.585.33, 4.771.56 cells/s · 4 cells to go
0.35 s · throttle 1 · steer +1
0.35 s · throttle 1 · steer +1
0.3 s · throttle 1 · steer +0.7
Reply
<drive>
0.35 throttle 1 steer 1
0.35 throttle 1 steer 1
0.3 throttle 1 steer 0.7
</drive>
8554.585.43, 5.811.48 cells/s · 3 cells to go
0.1 s · throttle 1 · steer +1
0.1 s · throttle 1 · steer +0.6
1 wall hit
Reply
Right now the robot is heading slightly down toward the bottom wall (y limit about 5.85), so I'm turning right to swing its heading up toward the dock. I'll turn in short steps and check the position after each one.

<drive>
0.1 throttle 1 steer 1
0.1 throttle 1 steer 0.6
</drive>
8654.785.16, 5.851.42 cells/s · 3 cells to go
0.25 s · throttle 1 · steer 0
0.25 s · throttle 1 · steer 0
Reply
<drive>
0.25 throttle 1 steer 0
0.25 throttle 1 steer 0
</drive>
8755.284.44, 5.691.53 cells/s · 2 cells to go
0.2 s · throttle 1 · steer -0.4
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 1 steer -0.4
0.3 throttle 1 steer 0
</drive>
8855.783.70, 5.631.48 cells/s · 1 cells to go
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
The robot is 1.2 cells from the dock, heading left at top speed, with an open passage through x = 3 into the dock cell. At 1.48 cells/s, about 0.7 s of full throttle carries it to roughly x 2.66, inside the 0.29 dock radius.

<drive>
0.7 throttle 1 steer 0
</drive>
8956.282.88, 5.621.77 cells/s · 0 cells to go
0.1 s · throttle 1 · steer 0
Reply
<drive>
0.1 throttle 1 steer 0
</drive>