MICRO MOUSE BENCHMARK · FAST LANE

Claude Sonnet 5.5 on Fast Lane maze 2 (level 3-6)

Reached the dock in 21.525 s against the bot's 14.158 s on the same maze, after 30 replies and 2 wall hits. All of Claude Sonnet 5.5's runs.

RESULTReached the dock
TIME21.525 s
BOT14.158 s
SCORE66
WALL HITS2
REPLIES30
MODEL TIME5.2 min
COST$0.507 (API-equivalent)
TOKENS IN / OUT75,198 / 35,150
REQUESTS30
The maze and the path it droveSeen from above. The dashed line is the game's bot on the same maze. Each dot marks where a reply began.
Reply 1 at 0.000 sReply 2 at 0.500 sReply 3 at 1.000 sReply 4 at 1.850 sReply 5 at 2.850 sReply 6 at 3.367 sReply 7 at 3.667 sReply 8 at 4.467 sReply 9 at 5.467 sReply 10 at 6.467 sReply 11 at 6.917 sReply 12 at 7.617 sReply 13 at 8.517 sReply 14 at 9.317 sReply 15 at 10.017 sReply 16 at 10.717 sReply 17 at 11.217 sReply 18 at 11.867 sReply 19 at 12.667 sReply 20 at 13.567 sReply 21 at 14.367 sReply 22 at 14.867 sReply 23 at 15.817 sReply 24 at 16.617 sReply 25 at 17.417 sReply 26 at 18.417 sReply 27 at 19.017 sReply 28 at 19.917 sReply 29 at 20.467 sReply 30 at 20.967 s
Its pathThe bot's pathDockBoost pad

Every reply

Where the robot was when the game paused, how far it still had to go, and the controls the model sent for the next stretch, with anything the game moved, cut or skipped. The run file carries an arcade-session/1 envelope. Its input tape, in the game's own format, replays this exact run at Micro Mouse commit 87bf0cb.

ReplyClock (s)Robot (x, y in cells)Controls sent
10.004.50, 2.500.00 cells/s · 28 cells to go
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
</drive>
20.504.50, 2.211.16 cells/s · 28 cells to go
0.15 s · throttle 1 · steer 0
0.35 s · throttle 0.8 · steer -1
Reply
<drive>
0.15 throttle 1 steer 0
0.35 throttle 0.8 steer -1
</drive>
31.004.43, 1.581.18 cells/s · 27 cells to go
0.3 s · throttle 1 · steer -1
0.15 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer +0.1
Reply
Heading is -126°, so the robot needs about 54° more left turn to point along row 1, which runs left to the corner at (0,1). I'll hold the left lock briefly, let the wheel centre, then run straight along the corridor.

<drive>
0.3 throttle 1 steer -1
0.15 throttle 1 steer 0
0.4 throttle 1 steer 0.1
</drive>
41.853.26, 1.411.58 cells/s · 26 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
52.851.44, 1.441.94 cells/s · 24 cells to go
0.1167 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer +1
Reply
Next I'll go straight briefly, then start the right-hand turn to head up through column 0.

<drive>
0.12 throttle 1 steer 0
0.4 throttle 1 steer 1
</drive>
63.370.56, 1.311.48 cells/s · 23 cells to go
0.3 s · throttle 0.8 · steer +1
Reply
<drive>
0.3 throttle 0.8 steer 1
</drive>
73.670.40, 0.991.18 cells/s · 22 cells to go
0.5 s · throttle 0.7 · steer +1
0.3 s · throttle 1 · steer 0
Reply
The robot is in cell (0,0) heading up, and the route goes right along row 0. I'm starting a right turn now to line up with the row-0 corridor, then driving straight.

<drive>
0.5 throttle 0.7 steer 1
0.3 throttle 1 steer 0
</drive>
84.471.09, 0.591.48 cells/s · 21 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
Driving straight along the top corridor at full throttle toward the right end of row 0.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
95.472.81, 0.631.94 cells/s · 20 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
Driving straight along the top row toward the corner at (5,0). I'll turn down the right-hand column on the next reply.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
106.474.75, 0.661.94 cells/s · 18 cells to go
0.05 s · throttle 1 · steer 0
0.4 s · throttle 0.5 · steer +1
Reply
<drive>
0.05 throttle 1 steer 0
0.4 throttle 0.5 steer 1
</drive>
116.925.40, 0.790.93 cells/s · 17 cells to go
0.2 s · throttle 1 · steer +1
0.2 s · throttle 1 · steer +0.2
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 1 steer 1
0.2 throttle 1 steer 0.2
0.3 throttle 1 steer 0
</drive>
127.625.49, 1.701.50 cells/s · 16 cells to go
0.1 s · throttle 1 · steer -0.2
0.5 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.1 throttle 1 steer -0.2
0.5 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
138.525.37, 3.121.79 cells/s · 14 cells to go
0.5 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
Driving straight down to the bottom row first. Next I'll turn left along row 5 toward the boost pad.

<drive>
0.5 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
149.325.26, 4.641.94 cells/s · 15 cells to go
0.3 s · throttle 1 · steer 0
0.4 s · throttle 0.6 · steer +1
Reply
Next I'm driving straight down a little further to clear the wall corner at (5, 5). Then I'll turn right to head left along the bottom row.

<drive>
0.3 throttle 1 steer 0
0.4 throttle 0.6 steer 1
</drive>
1510.025.07, 5.770.93 cells/s · 14 cells to go
0.3 s · throttle 0.5 · steer +1
0.4 s · throttle 1 · steer 0
1 wall hit
Reply
<drive>
0.3 throttle 0.5 steer 1
0.4 throttle 1 steer 0
</drive>
1610.724.41, 5.761.48 cells/s · 13 cells to go
0.5 s · throttle 1 · steer 0
Reply
Heading left along the bottom row toward the pad. I'll hold the line for now, then turn up at column 2.

<drive>
0.5 throttle 1 steer 0
</drive>
1711.223.62, 5.601.74 cells/s · 12 cells to go
0.25 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer +1
Reply
I'm holding the straight line through the boost pad for 0.25 s, then turning right at full lock to head up the column at x 2.5. I'll check the state after the turn before committing the rest of the second.

<drive>
0.25 throttle 1 steer 0
0.4 throttle 1 steer 1
</drive>
1811.872.38, 5.102.31 cells/s · 11 cells to go
0.15 s · throttle 1 · steer +1
0.3 s · throttle 1 · steer 0
0.35 s · throttle 1 · steer 0
Reply
<drive>
0.15 throttle 1 steer 1
0.3 throttle 1 steer 0
0.35 throttle 1 steer 0
</drive>
1912.672.30, 3.681.64 cells/s · 9 cells to go
0.25 s · throttle 1 · steer 0
0.45 s · throttle 0.8 · steer -1
0.2 s · throttle 1 · steer 0
Reply
<drive>
0.25 throttle 1 steer 0
0.45 throttle 0.8 steer -1
0.2 throttle 1 steer 0
</drive>
2013.572.03, 2.511.48 cells/s · 8 cells to go
0.25 s · throttle 1 · steer -0.6
0.25 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
Heading left along row 2, then I'll turn down at column 0.

<drive>
0.25 throttle 1 steer -0.6
0.25 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
2114.370.88, 2.191.61 cells/s · 6 cells to go
0.5 s · throttle 0.6 · steer -1
Reply
Cell (0,2) opens to the right and down, and the route to the dock goes down column 0, along row 5, then up column 1. I'm turning left from heading -170 toward 90 (down) with a short, partly throttled segment so I can check the result before the next reply.

<drive>
0.5 throttle 0.6 steer -1
</drive>
2214.870.36, 2.250.88 cells/s · 6 cells to go
0.25 s · throttle 0.3 · steer -1
0.1 s · throttle 0.5 · steer 0
0.3 s · throttle 0.8 · steer +0.2
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.25 throttle 0.3 steer -1
0.1 throttle 0.5 steer 0
0.3 throttle 0.8 steer 0.2
0.3 throttle 1 steer 0
</drive>
2315.820.24, 3.151.50 cells/s · 5 cells to go
0.2 s · throttle 1 · steer -0.3
0.3 s · throttle 1 · steer +0.1
0.3 s · throttle 1 · steer 0
Reply
Heading is 95° at x 0.24, so I'm nudging left to move away from the wall, then holding straight down column 0. I'll re-check the state before starting the turns toward the dock.

<drive>
0.2 throttle 1 steer -0.3
0.3 throttle 1 steer 0.1
0.3 throttle 1 steer 0
</drive>
2416.620.27, 4.351.65 cells/s · 4 cells to go
0.3 s · throttle 1 · steer 0
0.5 s · throttle 0.7 · steer +1
1 wall hit
Reply
<drive>
0.3 throttle 1 steer 0
0.5 throttle 0.7 steer 1
</drive>
2517.420.15, 5.470.40 cells/s · 3 cells to go
0.5 s · throttle 0 · steer -1
0.5 s · throttle 0 · steer -1
Reply
I'm turning the robot left on the spot to face right, toward cell (1,5). From there the route goes up through (1,4) to the dock at (1,3).

<drive>
0.5 steer -1
0.5 steer -1
</drive>
2618.420.15, 5.480.00 cells/s · 3 cells to go
0.5 s · throttle 0 · steer -1
0.1 s · throttle 0 · steer -1
Reply
Heading is 88°, so the robot faces down and needs to face right (0°). I'll pivot left in place for about 0.6 s, then check the heading before driving along the bottom row.

<drive>
0.5 steer -1
0.1 steer -1
</drive>
2719.020.15, 5.480.00 cells/s · 3 cells to go
0.1 s · throttle 0.6 · steer -1
0.5 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
Heading is 18° with the wheel at full left, so I'll trim the heading to about 0° and drive right along row 5 toward x 1.5. After that comes the left turn up column 1 to the dock.

<drive>
0.1 throttle 0.6 steer -1
0.5 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
2819.921.06, 5.441.73 cells/s · 2 cells to go
0.25 s · throttle 0 · steer -1
0.3 s · throttle 0.4 · steer -1
Reply
I'm starting the left turn toward the dock column now, easing off the throttle so the radius stays tight. I'll check the state afterward and correct.

<drive>
0.25 steer -1
0.3 throttle 0.4 steer -1
</drive>
2920.471.56, 5.260.60 cells/s · 2 cells to go
0.1 s · throttle 0.6 · steer -1
0.4 s · throttle 1 · steer 0
Reply
I'm steering left to straighten the heading toward straight up (-90°), then driving up the corridor to the dock.

<drive>
0.1 throttle 0.6 steer -1
0.4 throttle 1 steer 0
</drive>
3020.971.60, 4.701.49 cells/s · 1 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>