Claude Haiku 5.5 on the daily maze of 2026-10-09
Reached the dock in 80.392 s against the median person's 27.575 s on the same maze, after 116 replies and 23 wall hits. The median of 30 people who raced it was 27.575 s (the middle half 27.11 to 29.633 s, the best 26.092 s); the game's bot takes 29.533 s. All of Claude Haiku 5.5's runs.
RESULTReached the dock
TIME80.392 s
MEDIAN PERSON27.575 s
BOT29.533 s
SCORE34
WALL HITS23
REPLIES116
MODEL TIME64.3 min
COST$0.444 (API-equivalent)
TOKENS IN / OUT307,633 / 820,257
REQUESTS116
Its pathThe bot's pathDock
Every reply
Where the robot was when the game paused, how far it still had to go, and the controls the model sent for the next stretch, with anything the game moved, cut or skipped. The run file carries an arcade-session/1 envelope. Its input tape, in the game's own format, replays this exact run at Micro Mouse commit 87bf0cb.
| Reply | Clock (s) | Robot (x, y in cells) | Controls sent | |
|---|---|---|---|---|
| 1 | 0.00 | 5.50, 6.500.00 cells/s · 57 cells to go | 0.35 s · throttle 1 · steer 0 0.25 s · throttle 1 · steer +1 0.3 s · throttle 1 · steer +1 | ReplyI'm starting the run by driving down out of the robot's cell into the open row below, then turning left along the bottom row. The turn happens partway through this reply, so I'll check the state before committing to the next move. <drive> 0.35 throttle 1 steer 0 0.25 throttle 1 steer 1 0.3 throttle 1 steer 1 </drive> |
| 2 | 0.90 | 5.19, 7.241.48 cells/s · 56 cells to go | 0.1167 s · throttle 1 · steer +1 0.4 s · throttle 1 · steer 0 | ReplyRoute check: the only way out of the bottom-row pocket is west along row 7 to column 0, then up and around the outer loop. Heading 161 points slightly down-left, so I'll steer a short bit right to bring it toward 180 and then hold straight. <drive> 0.12 throttle 1 steer 1 0.4 throttle 1 steer 0 </drive> |
| 3 | 1.42 | 4.45, 7.201.49 cells/s · 55 cells to go | 0.4 s · throttle 1 · steer 0 0.3 s · throttle 1 · steer 0 2 wall hits | ReplyThe robot is in the bottom row heading left, and that row's walls are open to the left, so I'll keep driving straight and reassess after this stretch. <drive> 0.4 throttle 1 steer 0 0.3 throttle 1 steer 0 </drive> |
| 4 | 2.12 | 3.45, 7.151.38 cells/s · 54 cells to go | 0.35 s · brake · steer 0 0.5 s · throttle 0 · steer +1 0.15 s · throttle 0 · steer +1 1 cut at the one-second limit | ReplyThe robot is heading left along the bottom corridor, and the route to the dock runs right first. It needs to brake, pivot in place to face right, then drive forward. I'll brake to a stop, then pivot right. <drive> 0.35 brake steer 0 0.5 steer 1 0.3 steer 1 </drive> |
| 5 | 3.12 | 3.29, 7.150.00 cells/s · 54 cells to go | 0.5 s · throttle 0 · steer -1 1 moved into range | ReplyThe robot needs to turn left toward row 7's open corridor, so I'll pivot in place with full left steer. The wheel is still at full right, so the first part of the turn is slow while it swings across. <drive> 0.9 steer -1 throttle 0 </drive> |
| 6 | 3.62 | 3.29, 7.150.00 cells/s · 54 cells to go | 0.5 s · throttle 0 · steer -1 | ReplyI'm turning left to face the open passage before driving. The robot is facing up-left and the cell opens to the left, so I'm pivoting anticlockwise with no throttle. <drive> 0.5 throttle 0 steer -1 </drive> |
| 7 | 4.12 | 3.29, 7.150.00 cells/s · 54 cells to go | 0.5 s · throttle 0 · steer -1 1 moved into range | ReplyThe robot is stopped in cell (3,7), heading -107°, with the wheel at full left. Last reply it turned from -166° to -107°, so steer -1 is increasing the heading here. The route to the dock runs east through (4,7) and (5,7), then up through (5,6), (5,5) and (4,5), then west along row 6 and up column 1, so I need to turn toward 0°. I'll pivot in place for now and check the heading before moving. <drive> 0.6 throttle 0 steer -1 </drive> |
| 8 | 4.62 | 3.29, 7.150.00 cells/s · 54 cells to go | 0.15 s · throttle 0 · steer 0 0.4 s · throttle 1 · steer 0 | ReplyThe dock is only reachable by a long loop: west along the bottom row, up the left column, across the top row, down the right column, then back through the middle. The robot is facing almost due left, so I'll let the wheel centre and then drive west. <drive> 0.15 throttle 0 steer 0 0.4 throttle 1 steer 0 </drive> |
| 9 | 5.17 | 3.17, 7.300.93 cells/s · 54 cells to go | 0.4 s · throttle 1 · steer -1 0.5 s · throttle 1 · steer -1 2 wall hits | Reply<drive> 0.4 throttle 1 steer -1 0.5 throttle 1 steer -1 </drive> |
| 10 | 6.07 | 3.06, 7.850.28 cells/s · 54 cells to go | 0.5 s · throttle 0 · steer +1 0.5 s · throttle 0 · steer +1 | ReplyThe robot is pressed against the bottom wall, facing down-right at heading 17°. The route to the dock runs left along row 7, up column 0, then across the top and down through the centre. So first I'll pivot right (clockwise) on the spot toward 180°, with no throttle so it doesn't drive into the wall. <drive> 0.5 throttle 0 steer 1 0.5 throttle 0 steer 1 </drive> |
| 11 | 7.07 | 3.07, 7.850.00 cells/s · 54 cells to go | 0.5 s · throttle 0 · steer +1 0.25 s · throttle 0 · steer +0.5 1 moved into range | ReplyHeading 77° is nearly straight down, and the route runs left along the bottom row. Since the robot is stopped, I'll pivot clockwise (steer +1) to face left, about 103° away, then check the heading. <drive> 0.6 throttle 0 steer 1 0.25 throttle 0 steer 0.5 </drive> |
| 12 | 7.82 | 3.07, 7.850.00 cells/s · 54 cells to go | 0.45 s · throttle 0 · steer -1 | Reply<drive> 0.45 throttle 0 steer -1 </drive> |
| 13 | 8.27 | 3.07, 7.850.00 cells/s · 54 cells to go | 0.2 s · throttle 0 · steer -1 | ReplyI'm in the bottom-right corner of the maze, where the only way out is left along row 7. The robot is still turning toward 180 degrees, so I'll keep the wheel at full left and pivot in place for a short stretch before driving. <drive> 0.2 throttle 0 steer -1 </drive> |
| 14 | 8.47 | 3.07, 7.850.00 cells/s · 54 cells to go | 0.3 s · throttle 0 · steer -1 | ReplyTurning the robot to face west so it can follow row 7 toward the left column. The route to the dock is long: west to column 0, north to row 0, east to column 7, then back through the middle. <drive> 0.3 steer -1 </drive> |
| 15 | 8.77 | 3.07, 7.850.00 cells/s · 54 cells to go | 0.5 s · throttle 0 · steer -1 | ReplyThe robot's heading is about 109°, and the only open exits from this cell are left and right. The route goes right toward (5,7) and then up, so I need to turn left toward heading 0°. I'll pivot in place first. <drive> 0.5 throttle 0 steer -1 </drive> |
| 16 | 9.27 | 3.07, 7.850.00 cells/s · 54 cells to go | 0.5 s · throttle 0 · steer -1 0.35 s · throttle 0 · steer -1 | ReplyThe robot is pivoting in place at the bottom wall, heading 74°. The route to the dock starts by heading left along the bottom row, which needs about a 106° turn. Last time the left steer added about 58° in 0.5 s, so I'll hold it for about 0.85 s with no throttle. <drive> 0.5 throttle 0 steer -1 0.35 throttle 0 steer -1 </drive> |
| 17 | 10.12 | 3.07, 7.850.00 cells/s · 54 cells to go | 0.5 s · throttle 0 · steer -1 0.25 s · throttle 0.6 · steer 0 1 moved into range | Reply<drive> 0.75 throttle 0 steer -1 0.25 throttle 0.6 steer 0 </drive> |
| 18 | 10.87 | 3.00, 7.810.58 cells/s · 54 cells to go | 0.15 s · throttle 0.8 · steer -1 0.35 s · throttle 0.8 · steer 0 | Reply<drive> 0.15 throttle 0.8 steer -1 0.35 throttle 0.8 steer 0 </drive> |
| 19 | 11.37 | 2.53, 7.631.18 cells/s · 53 cells to go | 0.25 s · brake · steer 0 0.5 s · throttle 0 · steer +1 1 moved into range | ReplyI'm at (2.53, 7.63) heading left, and the corridor along row 7 is one cell tall, so I'll stop and pivot in place before heading right. <drive> 0.25 brake 0.75 steer 1 </drive> |
| 20 | 12.12 | 2.37, 7.580.00 cells/s · 53 cells to go | 0.4 s · throttle 0 · steer -1 | ReplyHeading is -117 with the robot stopped, and the only way out of this cell is left along row 7. I'll pivot left first, then check the heading before driving. <drive> 0.4 throttle 0 steer -1 </drive> |
| 21 | 12.52 | 2.37, 7.580.00 cells/s · 53 cells to go | 0.5 s · throttle 0 · steer +1 1 moved into range | Reply<drive> 0.8 throttle 0 steer 1 </drive> |
| 22 | 13.02 | 2.37, 7.580.00 cells/s · 53 cells to go | 0.4 s · throttle 0 · steer +1 | ReplyThe robot is at the bottom of the maze, facing up-left into the north wall of its cell. Its only exits are left and right, so I'll pivot it toward the right, where the path loops up through the open cells near column 5. The last turn went the wrong way, so I'll use a short segment and check the heading. <drive> 0.4 throttle 0 steer 1 </drive> |
| 23 | 13.42 | 2.37, 7.580.00 cells/s · 53 cells to go | 0.5 s · throttle 0 · steer -1 0.25 s · throttle 0 · steer 0 1 moved into range | ReplyThe robot is in a dead-end cell and the dock is reachable only by a long loop: left along the bottom row, up the left column, across the top row, down the right column, and back through the middle. The first step is to turn left toward (1,7), so I'm pivoting on the spot to face west. <drive> 0.75 throttle 0 steer -1 0.25 throttle 0 steer 0 </drive> |
| 24 | 14.17 | 2.37, 7.580.00 cells/s · 53 cells to go | 0.5 s · throttle 0 · steer -1 0.4 s · throttle 0 · steer -1 | ReplyI'm starting a pivot to the left. The robot needs to turn about 130 degrees anticlockwise to face west, toward the open cell at (1,7). My last pivot turned the wrong way, so I'll check the heading after this stretch. <drive> 0.5 throttle 0 steer -1 0.4 throttle 0 steer -1 </drive> |
| 25 | 15.07 | 2.37, 7.580.00 cells/s · 53 cells to go | 0.3 s · throttle 0 · steer -1 | ReplyHeading is -140 and the robot is nearly stopped. The route to the dock starts by heading left along the bottom row to the column-0 corridor, so first I'll pivot left to face west. <drive> 0.3 throttle 0 steer -1 </drive> |
| 26 | 15.37 | 2.37, 7.580.00 cells/s · 53 cells to go | 0.3 s · throttle 0 · steer -1 | ReplyThe robot is in a dead-end row. The only exit is left along row 7, then up column 0. Its heading is -140 and the wheel is already at full left, so I'll pivot left to bring it toward heading 180 before driving. <drive> 0.3 throttle 0 steer -1 </drive> |
| 27 | 15.67 | 2.37, 7.580.00 cells/s · 53 cells to go | 0.5 s · throttle 1 · steer 0 0.4 s · throttle 1 · steer 0 1 wall hit1 moved into range | ReplyHeading is about 185°, nearly straight left, so I'll accelerate left along row 7 and check the state before the turn up into column 0. <drive> 0.6 throttle 1 steer 0 0.4 throttle 1 steer 0 </drive> |
| 28 | 16.57 | 1.91, 7.850.25 cells/s · 52 cells to go | 0.3 s · throttle 1 · steer +1 0.3 s · throttle 1 · steer 0 2 wall hits | ReplyThe route from here goes left into the column-0 corridor, up to the top row, around the right side, and back down through the centre to the dock. That's about 52 cells. For now I'll turn left out of the bottom wall and accelerate. <drive> 0.3 throttle 1 steer 1 0.3 throttle 1 steer 0 </drive> |
| 29 | 17.17 | 1.64, 7.850.84 cells/s · 52 cells to go | 0.2 s · throttle 1 · steer +0.3 0.3 s · throttle 1 · steer 0 | ReplyThe robot is at the bottom edge heading slightly down-left, so I'll ease the heading toward straight left and drive toward the open left side of this cell. <drive> 0.2 throttle 1 steer 0.3 0.3 throttle 1 steer 0 </drive> |
| 30 | 17.67 | 0.99, 7.841.49 cells/s · 51 cells to go | 0.5 s · throttle 1 · steer +1 0.15 s · throttle 1 · steer 0 0.3 s · throttle 1 · steer 0 1 moved into range | Reply<drive> 0.55 throttle 1 steer 1 0.15 throttle 1 steer 0 0.3 throttle 1 steer 0 </drive> |
| 31 | 18.62 | 0.16, 6.931.52 cells/s · 50 cells to go | 0.25 s · throttle 0 · reverse 1 · steer +1 0.5 s · throttle 0 · reverse 1 · steer 0 2 wall hits | ReplyI'm at the bottom-left corner heading up, so I need to turn around. The route runs down into the cell below, then east along the bottom row. I'll reverse to slow down and swing the nose toward straight up, so the reverse motion points down. <drive> 0.25 reverse 1 steer 1 0.5 reverse 1 steer 0 </drive> |
| 32 | 19.37 | 0.15, 6.890.57 cells/s · 50 cells to go | 0.5 s · throttle 0 · steer +1 0.5 s · throttle 0 · steer +1 1 wall hit | ReplyPivoting in place to turn the robot toward the bottom of this corridor, so it can exit through row 7 and head right. <drive> 0.5 throttle 0 steer 1 0.5 throttle 0 steer 1 </drive> |
| 33 | 20.37 | 0.15, 6.930.00 cells/s · 50 cells to go | 0.5 s · throttle 0 · steer -1 1 moved into range | Reply<drive> 0.6 throttle 0 steer -1 </drive> |
| 34 | 20.87 | 0.15, 6.930.00 cells/s · 50 cells to go | 0.5 s · throttle 0 · steer -1 0.5 s · throttle 0 · steer -1 | ReplyThe robot needs to turn from heading 25° to straight up (-90°), so I'm pivoting left on the spot with the wheel already at full lock. <drive> 0.5 throttle 0 steer -1 0.5 throttle 0 steer -1 </drive> |
| 35 | 21.87 | 0.15, 6.930.00 cells/s · 50 cells to go | 0.5 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 3 wall hits2 moved into range2 cut at the one-second limit | ReplyThe robot is in a dead-end pocket at (0,6), so the only way out is up column 0. I'll drive up toward row 0, then check the state before turning. <drive> 0.6 throttle 1 steer 0 1.0 throttle 1 steer 0 1.0 throttle 1 steer 0 0.5 throttle 1 steer 0 </drive> |
| 36 | 22.87 | 0.15, 6.141.27 cells/s · 50 cells to go | 0.25 s · throttle 1 · steer +0.6 0.25 s · throttle 1 · steer 0 | ReplyThe robot is in the left corridor at x 0.15 with heading -101, so it will drift into the left wall unless I correct it. The route to the dock starts by going up column 0 to row 0, so I'll steer right briefly to square up, then drive straight. <drive> 0.25 throttle 1 steer 0.6 0.25 throttle 1 steer 0 </drive> |
| 37 | 23.37 | 0.22, 5.421.48 cells/s · 49 cells to go | 0.15 s · throttle 1 · steer -0.4 0.15 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 1 moved into range | Reply<drive> 0.15 throttle 1 steer -0.4 0.15 throttle 1 steer 0 0.7 throttle 1 steer 0 </drive> |
| 38 | 24.17 | 0.30, 4.211.69 cells/s · 48 cells to go | 0.4 s · brake · steer 0 0.5 s · throttle 0 · steer +1 | ReplyI'm braking to stop, then pivoting right in place to turn around. The corridor is one cell wide, so I can't make a wide U-turn. <drive> 0.4 brake 0.5 steer 1 </drive> |
| 39 | 25.07 | 0.31, 3.880.00 cells/s · 47 cells to go | 0.5 s · throttle 0 · steer -1 | ReplyThe robot is stopped at (0.31, 3.88), facing up-right at -43°, with the wheel still at full right lock. The route to the dock is 47 cells: up column 0 to row 0, east along row 0, down column 7, then back through the middle of the maze. Right now it needs to turn left to face straight up the corridor. With no throttle it pivots in place, so it can't hit a wall while turning. <drive> 0.5 throttle 0 steer -1 </drive> |
| 40 | 25.57 | 0.31, 3.880.00 cells/s · 47 cells to go | 0.3 s · throttle 0 · steer +1 0.5 s · throttle 0 · steer +1 1 moved into range | ReplyI'm at (0.31, 3.88) with no speed, so I'll pivot right to face roughly down, toward the south route past (0,6) and (0,7). I'll check the heading before driving. <drive> 0.3 throttle 0 steer 1 0.6 throttle 0 steer 1 </drive> |
| 41 | 26.37 | 0.31, 3.880.00 cells/s · 47 cells to go | 0.5 s · throttle 0 · steer -1 0.35 s · throttle 0 · steer -1 | Reply<drive> 0.5 throttle 0 steer -1 0.35 throttle 0 steer -1 </drive> |
| 42 | 27.22 | 0.31, 3.880.00 cells/s · 47 cells to go | 0.35 s · throttle 0 · steer -1 0.2 s · throttle 1 · steer 0 0.45 s · throttle 1 · steer 0 | ReplyThe robot is stuck in a dead-end column, so the only route runs up to row 0, along the top corridor to column 7, then down and around to the dock. First I pivot left to face up, then drive straight up the column. <drive> 0.35 throttle 0 steer -1 0.2 throttle 1 steer 0 0.45 throttle 1 steer 0 </drive> |
| 43 | 28.22 | 0.23, 3.391.50 cells/s · 47 cells to go | 0.2 s · throttle 1 · steer +0.3 0.3 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 | ReplyThe robot is in the left corridor at heading -99°, drifting left toward the wall. I'll steer slightly right to straighten up, then drive north toward the top row to turn east along row 0. <drive> 0.2 throttle 1 steer 0.3 0.3 throttle 1 steer 0 0.5 throttle 1 steer 0 </drive> |
| 44 | 29.22 | 0.19, 1.821.78 cells/s · 45 cells to go | 0.35 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer +1 0.15 s · throttle 1 · steer 0 | ReplyThe robot is heading up into cell (0,0), and the route to the dock runs right along row 0. I'll drive up about 0.35 s, then steer right through a quarter turn so it heads east with clearance from the top wall. <drive> 0.35 throttle 1 steer 0 0.5 throttle 1 steer 1 0.15 throttle 1 steer 0 </drive> |
| 45 | 30.22 | 0.66, 0.341.48 cells/s · 44 cells to go | 0.35 s · brake · steer 0 0.5 s · throttle 0 · steer +1 1 moved into range | ReplyThe robot is heading right along the top row, but the route down the left column is the one that connects to the dock. It needs to turn to face down, so I'll brake to a stop first, then pivot clockwise in place. The turn needs about 105 degrees, so I'll finish it on the next reply. <drive> 0.35 brake steer 0 0.65 steer 1 </drive> |
| 46 | 31.07 | 0.90, 0.270.00 cells/s · 44 cells to go | 0.3 s · throttle 1 · steer -1 0.2 s · throttle 1 · steer 0 | ReplyHeading is 30°, so I need to turn left toward row 0's open corridor and keep y near 0.27 to clear the top wall. The route runs along the top row to column 7, then down and around the loop. <drive> 0.3 throttle 1 steer -1 0.2 throttle 1 steer 0 </drive> |
| 47 | 31.57 | 1.12, 0.471.15 cells/s · 43 cells to go | 0.3 s · throttle 1 · reverse 1 · steer 0 0.5 s · throttle 0 · steer +1 1 moved into range | ReplyI'm braking first because heading 43° at 1.15 cells/s would hit the bottom wall of this cell within about half a second. Once stopped, I'll pivot right to face west, then head left and turn down column 0 toward the dock. <drive> 0.3 throttle 1 reverse 1 steer 0 0.7 throttle 0 steer 1 </drive> |
| 48 | 32.37 | 1.23, 0.570.00 cells/s · 43 cells to go | 0.5 s · throttle 0 · steer +1 0.4 s · throttle 0 · steer +1 0.1 s · throttle 0 · steer 0 | Reply<drive> 0.5 throttle 0 steer 1 0.4 throttle 0 steer 1 0.1 throttle 0 steer 0 </drive> |
| 49 | 33.37 | 1.23, 0.570.00 cells/s · 43 cells to go | 0.5 s · throttle 0 · steer +1 0.4 s · throttle 0 · steer +1 1 moved into range | Reply<drive> 0.6 throttle 0 steer 1 0.4 throttle 0 steer 1 </drive> |
| 50 | 34.27 | 1.23, 0.570.00 cells/s · 43 cells to go | 0.45 s · throttle 0 · steer +1 0.3 s · throttle 0.6 · steer 0 | Reply<drive> 0.45 throttle 0 steer 1 0.3 throttle 0.6 steer 0 </drive> |
| 51 | 35.02 | 1.34, 0.580.69 cells/s · 43 cells to go | 0.5 s · throttle 1 · steer 0 1 moved into range | Reply<drive> 1.0 throttle 1 steer 0 </drive> |
| 52 | 35.52 | 1.96, 0.581.62 cells/s · 43 cells to go | 0.5 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 | ReplyRobot is in the open top corridor, heading east with speed already up. The route runs east along row 0 to column 7, then down the right side. Holding straight throttle for now. <drive> 0.5 throttle 1 steer 0 0.5 throttle 1 steer 0 </drive> |
| 53 | 36.52 | 3.81, 0.611.94 cells/s · 41 cells to go | 0.5 s · brake · steer -1 0.5 s · throttle 0 · steer -1 | ReplyTurning around to head west toward the left-hand corridor. Braking hard first, then pivoting left in place. <drive> 0.5 brake steer -1 0.5 steer -1 </drive> |
| 54 | 37.52 | 4.23, 0.550.00 cells/s · 40 cells to go | 0.5 s · throttle 0 · steer +1 0.4 s · throttle 0 · steer +1 | ReplyI'm at (4.23, 0.55) facing up-left, and the route to the dock leaves this row to the right. The only exits from (4,0) are left and right along the top row, and the right-hand path is the one that connects. So I'll pivot clockwise to face right before driving. <drive> 0.5 throttle 0 steer 1 0.4 throttle 0 steer 1 </drive> |
| 55 | 38.42 | 4.23, 0.550.00 cells/s · 40 cells to go | 0.4 s · throttle 0 · steer -1 0.4 s · throttle 0 · steer -1 | Reply<drive> 0.4 throttle 0 steer -1 0.4 throttle 0 steer -1 </drive> |
| 56 | 39.22 | 4.23, 0.550.00 cells/s · 40 cells to go | 0.5 s · throttle 0 · steer +1 1 moved into range | ReplyThe route to the dock goes right along the top row to the right-hand column, down that column, and around through the middle. I'm starting by turning the robot to face east. <drive> 0.6 throttle 0 steer 1 </drive> |
| 57 | 39.72 | 4.23, 0.550.00 cells/s · 40 cells to go | 0.5 s · throttle 0 · steer -1 0.4 s · throttle 0 · steer -1 | ReplyI'm turning the robot left to face the row 0 corridor, since the route to the dock starts by heading west to column 0. <drive> 0.5 throttle 0 steer -1 0.4 throttle 0 steer -1 </drive> |
| 58 | 40.62 | 4.23, 0.550.00 cells/s · 40 cells to go | 0.3 s · throttle 0 · steer +1 0.3 s · throttle 0 · steer +1 | ReplyRobot is in the top row facing up-left. The left branch from row 0 is a dead end, so the route goes right along row 0, then down column 7. First I'll pivot clockwise to face right. <drive> 0.3 throttle 0 steer 1 0.3 throttle 0 steer 1 </drive> |
| 59 | 41.22 | 4.23, 0.550.00 cells/s · 40 cells to go | 0.5 s · throttle 0 · steer +1 0.4 s · throttle 0 · steer +1 | ReplyI'm turning the robot right to face east so it can head along the top corridor toward the right-hand column. <drive> 0.5 throttle 0 steer 1 0.4 throttle 0 steer 1 </drive> |
| 60 | 42.12 | 4.23, 0.550.00 cells/s · 40 cells to go | 0.5 s · throttle 0 · steer -1 0.4 s · throttle 0 · steer -1 | ReplyThe robot's last pivot turned it the opposite way to what I expected from steer +1, so I'm testing the direction with a short steer -1 pivot. The left side of the maze is a dead end, so the route to the dock goes right along the top row. <drive> 0.5 throttle 0 steer -1 0.4 throttle 0 steer -1 </drive> |
| 61 | 43.02 | 4.23, 0.550.00 cells/s · 40 cells to go | 0.5 s · throttle 0 · steer +1 0.2 s · throttle 0.5 · steer 0 | Reply<drive> 0.5 throttle 0 steer 1 0.2 throttle 0.5 steer 0 </drive> |
| 62 | 43.72 | 4.25, 0.500.46 cells/s · 40 cells to go | 0.3 s · throttle 0 · steer -1 0.3 s · throttle 0 · steer -1 | ReplyThe robot is in a dead-end-style cell open only left and right, and it's facing up-right toward the top wall. I need to pivot anticlockwise (steer -1, no throttle) to face west, roughly a 114° turn, before driving left along the top row. <drive> 0.3 throttle 0 steer -1 0.3 throttle 0 steer -1 </drive> |
| 63 | 44.32 | 4.26, 0.470.00 cells/s · 40 cells to go | 0.4 s · throttle 0 · steer -1 | ReplyHeading -123 needs to reach -180 (due left) to run along row 0, so I'll pivot in place by holding full left steer. <drive> 0.4 throttle 0 steer -1 </drive> |
| 64 | 44.72 | 4.26, 0.470.00 cells/s · 40 cells to go | 0.5 s · throttle 0 · steer +1 0.5 s · throttle 0 · steer +1 1 cut at the one-second limit | ReplyThe robot is stopped and facing left, so I'll pivot clockwise (steer right) to turn it around toward the right-hand corridor, which leads to the dock. <drive> 0.5 throttle 0 steer 1 0.5 throttle 0 steer 1 0.4 throttle 0 steer 1 </drive> |
| 65 | 45.72 | 4.26, 0.470.00 cells/s · 40 cells to go | 0.4 s · throttle 0 · steer -1 | ReplyThe robot is stopped at (4.26, 0.47), facing -170 degrees, with the wheel still at full right. Last time, steer +1 turned the heading from -110 to -170, which is anticlockwise. That contradicts the stated convention, so I'll test steer -1 for a short stretch before committing to a direction. <drive> 0.4 throttle 0 steer -1 </drive> |
| 66 | 46.12 | 4.26, 0.470.00 cells/s · 40 cells to go | 0.5 s · throttle 0 · steer +1 1 moved into range | ReplyHeading -102 needs about 100 degrees of clockwise turn to face east along the top corridor, so I'll pivot in place first. <drive> 0.6 throttle 0 steer 1 </drive> |
| 67 | 46.62 | 4.26, 0.470.00 cells/s · 40 cells to go | 0.4 s · throttle 0 · steer -1 | Reply<drive> 0.4 throttle 0 steer -1 </drive> |
| 68 | 47.02 | 4.26, 0.470.00 cells/s · 40 cells to go | 0.45 s · throttle 0 · steer +1 | ReplyI'm turning right (clockwise) on the spot from -80° toward 0°, to face along the top corridor toward the right-hand route. <drive> 0.45 throttle 0 steer 1 </drive> |
| 69 | 47.47 | 4.26, 0.470.00 cells/s · 40 cells to go | 0.5 s · throttle 0 · steer -1 1 moved into range | ReplySteering -1 pivots the robot left (anticlockwise) on the spot. From -71° to 180° is about 109° of turn, and the wheel has to swing from right to left first, so I'll hold full left for most of a second. <drive> 0.9 throttle 0 steer -1 </drive> |
| 70 | 47.97 | 4.26, 0.470.00 cells/s · 40 cells to go | 0.5 s · throttle 0 · steer +1 | ReplyThe robot is at the top wall, heading up and to the right, with the wheel at full left. The route to the dock starts by heading east along row 0, so I'll pivot right first, with no throttle, to get the wheel across centre and turn toward 0 degrees. <drive> 0.5 throttle 0 steer 1 </drive> |
| 71 | 48.47 | 4.26, 0.470.00 cells/s · 40 cells to go | 0.4 s · throttle 0.4 · steer +1 0.3 s · throttle 0.7 · steer +0.3 | ReplyI'm at (4.26, 0.47) heading -55°, and the route to the dock runs east along row 0 to column 7, then down. Last time, steering with no throttle barely turned the robot, so this time I'm adding throttle to turn right while accelerating. The top wall is close, so I'm keeping the throttle low at first. <drive> 0.4 throttle 0.4 steer 1 0.3 throttle 0.7 steer 0.3 </drive> |
| 72 | 49.17 | 4.67, 0.441.04 cells/s · 40 cells to go | 0.3 s · throttle 1 · steer -0.2 0.4 s · throttle 1 · steer 0 0.3 s · throttle 1 · steer 0 | ReplyI'm heading right along the top row toward column 7, which leads down the right side toward the dock. I'll ease the heading back toward 0 and keep accelerating. <drive> 0.3 throttle 1 steer -0.2 0.4 throttle 1 steer 0 0.3 throttle 1 steer 0 </drive> |
| 73 | 50.17 | 6.12, 0.811.73 cells/s · 38 cells to go | 0.2 s · throttle 1 · steer -0.8 0.1 s · throttle 1 · steer 0 1 wall hit | ReplyHeading 13° is pushing the robot toward the bottom wall of cell (6,0), so I'm straightening it first. The route runs east into column 7, south down that column, then back west along row 7 and up through the maze to the dock. <drive> 0.2 throttle 1 steer -0.8 0.1 throttle 1 steer 0 </drive> |
| 74 | 50.47 | 6.57, 0.841.48 cells/s · 38 cells to go | 0.25 s · throttle 1 · steer +1 0.35 s · throttle 1 · steer +1 0.1 s · throttle 1 · steer 0 | ReplyThe robot is at the right edge of row 0, and the route to the dock starts by turning down column 7. I'll start a clockwise turn now, while x is still about 6.6, so the arc ends near x 7.4 and clears both the right wall and the wall on the left of column 7. <drive> 0.25 throttle 1 steer 1 0.35 throttle 1 steer 1 0.1 throttle 1 steer 0 </drive> |
| 75 | 51.17 | 7.40, 1.231.48 cells/s · 36 cells to go | 0.3 s · throttle 1 · steer +0.25 0.5 s · throttle 1 · steer 0 1 moved into range | ReplyThe robot is in a vertical corridor at x≈7.4 and drifting toward the right wall (its velocity is at 76°). The only way out of this column is down to row 7, then left, so I'll straighten the heading to about 90° and keep driving down. <drive> 0.3 throttle 1 steer 0.25 0.7 throttle 1 steer 0 </drive> |
| 76 | 51.97 | 7.43, 2.421.61 cells/s · 35 cells to go | 0.5 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 | Reply<drive> 0.5 throttle 1 steer 0 0.5 throttle 1 steer 0 </drive> |
| 77 | 52.97 | 7.36, 4.271.94 cells/s · 33 cells to go | 0.5 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 | ReplyThe robot is heading straight down column 7, which is the first leg of the 33-cell route: down to row 7, left into (6,7), up column 6, and around through the left side to the dock. This reply drives straight for 1 s so the turn at the bottom can be set up next. <drive> 0.5 throttle 1 steer 0 0.5 throttle 1 steer 0 </drive> |
| 78 | 53.97 | 7.29, 6.211.94 cells/s · 31 cells to go | 0.5 s · throttle 1 · steer 0 0.45 s · brake · steer 0 | ReplyDriving straight down to y≈7.2, then braking to a stop at y≈7.6 so I can turn west into the lower corridor. <drive> 0.5 throttle 1 steer 0 0.45 brake </drive> |
| 79 | 54.92 | 7.24, 7.610.03 cells/s · 30 cells to go | 0.5 s · throttle 0 · steer +1 1 moved into range | ReplyTurning the robot to face left so it can head into the corridor toward the dock. It's stopped and facing down into the bottom wall, so I'll pivot in place first. <drive> 0.8 throttle 0 steer 1 </drive> |
| 80 | 55.42 | 7.24, 7.610.00 cells/s · 30 cells to go | 0.5 s · throttle 0 · steer +1 | ReplyHeading 92 is pointing down, and the corridor west toward (6,7) is open. I'll pivot right to turn toward heading 180 (left) before driving. The pivot is about 44° per 0.5 s from a standstill, so I'll check the state after this stretch. <drive> 0.5 throttle 0 steer 1 </drive> |
| 81 | 55.92 | 7.24, 7.610.00 cells/s · 30 cells to go | 0.5 s · throttle 0 · steer -1 1 moved into range | Reply<drive> 0.6 throttle 0 steer -1 </drive> |
| 82 | 56.42 | 7.24, 7.610.00 cells/s · 30 cells to go | 0.5 s · throttle 1 · steer 0 0.35 s · brake · steer 0 1 moved into range | ReplyI'm driving straight left along the bottom row to the cell at (6,7), then braking so I can pivot up into column 6. <drive> 0.6 throttle 1 steer 0 0.35 brake </drive> |
| 83 | 57.27 | 6.79, 7.560.00 cells/s · 29 cells to go | 0.4 s · throttle 0 · steer +1 | Reply<drive> 0.4 throttle 0 steer 1 </drive> |
| 84 | 57.67 | 6.79, 7.560.00 cells/s · 29 cells to go | 0.45 s · throttle 0 · steer +1 | ReplyThe robot is at the bottom of column 6 and needs to turn up. Its wheel is already at full right lock, so I'll pivot clockwise on the spot for about 0.45 s, which should bring the heading near -90 (straight up). <drive> 0.45 throttle 0 steer 1 </drive> |
| 85 | 58.12 | 6.79, 7.560.00 cells/s · 29 cells to go | 0.4 s · throttle 1 · steer -0.2 0.5 s · throttle 1 · steer 0 1 wall hit1 moved into range | ReplyI'm at (6.79, 7.56) in the bottom-right corner, heading almost straight up, with the wheel still turned right. The route runs up column 6 to row 2, then left and down around the walls. For this stretch I'll accelerate straight up and ease the wheel back toward centre so I don't scrape the right-hand wall. <drive> 0.4 throttle 1 steer -0.2 0.6 throttle 1 steer 0 </drive> |
| 86 | 59.02 | 6.86, 7.050.22 cells/s · 29 cells to go | 0.3 s · throttle 1 · steer -0.6 0.3 s · throttle 1 · steer -0.2 0.3 s · throttle 1 · steer 0 1 wall hit | ReplyI'm steering left first because the robot is at x 6.86, against the right wall of the column 6 corridor, and needs to move toward the centre line before heading north. <drive> 0.3 throttle 1 steer -0.6 0.3 throttle 1 steer -0.2 0.3 throttle 1 steer 0 </drive> |
| 87 | 59.92 | 6.66, 6.211.50 cells/s · 28 cells to go | 0.2 s · throttle 1 · steer +0.3 0.3 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 | ReplyI'm at speed on the column-6 corridor, heading up-left at -107°. I'll correct the heading toward straight up and keep the throttle full on the clean straight. <drive> 0.2 throttle 1 steer 0.3 0.3 throttle 1 steer 0 0.5 throttle 1 steer 0 </drive> |
| 88 | 60.92 | 6.40, 4.671.78 cells/s · 26 cells to go | 0.5 s · throttle 1 · steer 0 0.35 s · throttle 1 · steer -1 0.15 s · throttle 1 · steer -0.6 1 wall hit | Reply<drive> 0.5 throttle 1 steer 0 0.35 throttle 1 steer -1 0.15 throttle 1 steer -0.6 </drive> |
| 89 | 61.92 | 6.15, 3.150.14 cells/s · 25 cells to go | 0.4 s · throttle 0.6 · steer +1 0.2 s · throttle 0.8 · steer 0 2 wall hits | ReplyHeading is -149 with the robot at x 6.15, near the left edge of the cell. I'll steer right to swing the nose up toward the opening at the top of cell (6,3). <drive> 0.4 throttle 0.6 steer 1 0.2 throttle 0.8 steer 0 </drive> |
| 90 | 62.52 | 6.15, 3.090.15 cells/s · 25 cells to go | 0.3 s · throttle 0.8 · steer +1 0.3 s · throttle 1 · steer 0 1 wall hit | ReplyThe robot is slow (0.15 cells/s) and heading up-left at -130°. The open exit from cell (6,3) is upward, so I need to turn to about -90° and drive straight up without clipping the wall corner at (6,3). I'll send a short segment and reassess once it has moved. <drive> 0.3 throttle 0.8 steer 1 0.3 throttle 1 steer 0 </drive> |
| 91 | 63.12 | 6.13, 2.850.91 cells/s · 24 cells to go | 0.5 s · throttle 0.8 · steer -1 0.5 s · throttle 0.8 · steer -1 | ReplyReply 91 turns the robot left out of cell (6,2) and into (5,2), then down column 5 toward the dock. <drive> 0.5 throttle 0.8 steer -1 0.5 throttle 0.8 steer -1 </drive> |
| 92 | 64.12 | 5.33, 2.501.18 cells/s · 23 cells to go | 0.2 s · throttle 0.8 · steer -1 0.15 s · throttle 0.9 · steer 0 0.5 s · throttle 1 · steer 0 | Reply<drive> 0.2 throttle 0.8 steer -1 0.15 throttle 0.9 steer 0 0.5 throttle 1 steer 0 </drive> |
| 93 | 64.97 | 5.39, 3.661.64 cells/s · 22 cells to go | 0.3 s · throttle 1 · steer +0.5 0.5 s · throttle 1 · steer 0 | Reply<drive> 0.3 throttle 1 steer 0.5 0.5 throttle 1 steer 0 </drive> |
| 94 | 65.77 | 5.27, 4.851.59 cells/s · 21 cells to go | 0.2 s · throttle 1 · steer +1 0.2 s · throttle 1 · steer +1 0.2 s · throttle 0.8 · steer +0.5 | ReplyI'm steering left out of the column toward the corridor at row 5, which leads toward the dock by the route through (4,5), (4,6), (3,6), (1,6), up column 1, and across the top to column 3. <drive> 0.2 throttle 1 steer 1 0.2 throttle 1 steer 1 0.2 throttle 0.8 steer 0.5 </drive> |
| 95 | 66.37 | 4.78, 5.471.18 cells/s · 19 cells to go | 0.35 s · throttle 0.8 · steer -1 | ReplyThe robot is heading left into the west wall of cell (4,5), so it needs to turn down through the opening into (4,6). From there the route runs left along row 6, up column 1, right along row 1, down column 3, and back left and up into the dock. That is 19 cells, matching the route distance. I'll start the turn now, then check the heading before going further. <drive> 0.35 throttle 0.8 steer -1 </drive> |
| 96 | 66.72 | 4.37, 5.531.18 cells/s · 19 cells to go | 0.25 s · throttle 0.3 · steer +1 | ReplyThe robot is in the cell (4,5) corridor and its heading points left, so it would hit the left wall of this cell within a fraction of a second. I'll turn right (steer +1) with light throttle to bring the heading toward down, then reassess. <drive> 0.25 throttle 0.3 steer 1 </drive> |
| 97 | 66.97 | 4.18, 5.630.58 cells/s · 19 cells to go | 0.25 s · throttle 0.5 · steer -1 0.25 s · throttle 0.7 · steer -0.6 2 wall hits | ReplyI'm turning the robot to head down toward (4,6), which starts the 19-cell route to the dock. Its current heading would carry it into the left wall. <drive> 0.25 throttle 0.5 steer -1 0.25 throttle 0.7 steer -0.6 </drive> |
| 98 | 67.47 | 4.15, 5.750.29 cells/s · 19 cells to go | 0.2 s · throttle 0.5 · steer -0.5 0.4 s · throttle 0.7 · steer 0 0.2 s · throttle 0.6 · steer +0.5 1 wall hit | ReplyThe robot is at (4.15, 5.75) and the route to the dock is down into (4,6), left along row 6 to column 1, up to row 1, right and down column 3, then left and up into the dock. The first move is to straighten from heading 111 toward down and continue into (4,6). <drive> 0.2 throttle 0.5 steer -0.5 0.4 throttle 0.7 steer 0 0.2 throttle 0.6 steer 0.5 </drive> |
| 99 | 68.27 | 4.11, 6.390.88 cells/s · 18 cells to go | 0.3 s · throttle 0.8 · steer +1 0.2 s · throttle 0.8 · steer +0.3 | ReplyThe route is 18 cells: left along row 6 to column 1, up column 1 to row 1, right to (3,1), down column 3 to row 5, left to (2,5), then up to the dock. First I need to turn from heading 106 toward 180 (left) without drifting into the bottom wall. <drive> 0.3 throttle 0.8 steer 1 0.2 throttle 0.8 steer 0.3 </drive> |
| 100 | 68.77 | 3.72, 6.761.18 cells/s · 17 cells to go | 0.2 s · throttle 1 · steer +0.5 0.4 s · throttle 1 · steer 0 | ReplyI'm at the bottom of cell (3,6), heading left and slightly down toward the bottom wall. The route to the dock runs left through (2,6) and (1,6), then up column 1 to (1,1), across to (3,1), down column 3, and back through (2,5) and column 2 to the dock. First I need to straighten to heading ~180 and keep the robot at y ≈ 6.5 as it moves left. <drive> 0.2 throttle 1 steer 0.5 0.4 throttle 1 steer 0 </drive> |
| 101 | 69.37 | 2.86, 6.751.53 cells/s · 16 cells to go | 0.45 s · throttle 1 · steer 0 0.25 s · throttle 1 · steer +1 0.3 s · throttle 1 · steer +1 | Reply<drive> 0.45 throttle 1 steer 0 0.25 throttle 1 steer 1 0.3 throttle 1 steer 1 </drive> |
| 102 | 70.37 | 1.40, 6.291.48 cells/s · 15 cells to go | 0.15 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 0.35 s · throttle 1 · steer 0 | ReplyThe robot is at cell (1,6) heading up-left, with the wheel still turned right. The route to the dock is 15 cells: up column 1 to row 1, right to column 3, down column 3 to row 5, left to column 2, then up through the dock's entry corridor. This segment straightens the robot up column 1. <drive> 0.15 throttle 1 steer 0 0.5 throttle 1 steer 0 0.35 throttle 1 steer 0 </drive> |
| 103 | 71.37 | 1.34, 4.701.84 cells/s · 13 cells to go | 0.5 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 | ReplyThe route from (1,4) goes up column 1 to (1,1), right along row 1, down column 3, west into (2,5), then north to the dock. This reply covers the straight run up column 1 without steering, since the robot is already aligned. <drive> 0.5 throttle 1 steer 0 0.5 throttle 1 steer 0 </drive> |
| 104 | 72.37 | 1.30, 2.771.94 cells/s · 11 cells to go | 0.4 s · throttle 1 · steer 0 0.35 s · throttle 1 · steer +1 | Reply<drive> 0.4 throttle 1 steer 0 0.35 throttle 1 steer 1 </drive> |
| 105 | 73.12 | 1.38, 1.401.53 cells/s · 10 cells to go | 0.2 s · throttle 0 · steer +1 0.2 s · throttle 0.6 · steer +1 0.2 s · throttle 0.8 · steer 0 | ReplyThe robot is heading up-right, and the top wall of cell (1,1) is only about 0.25 cells above it. I'll ease off the throttle and hold a hard right turn so it curves east through the open right side. Then I'll reapply throttle and straighten out. <drive> 0.2 throttle 0 steer 1 0.2 throttle 0.6 steer 1 0.2 throttle 0.8 steer 0 </drive> |
| 106 | 73.72 | 1.94, 1.261.18 cells/s · 10 cells to go | 0.15 s · throttle 1 · steer -0.6 0.35 s · throttle 1 · steer 0 | Reply<drive> 0.15 throttle 1 steer -0.6 0.35 throttle 1 steer 0 </drive> |
| 107 | 74.22 | 2.64, 1.401.50 cells/s · 9 cells to go | 0.3 s · throttle 1 · steer 0 0.4 s · throttle 1 · steer +1 | ReplyThe robot is in the right lane: the 9-cell route runs right into (3,1), then down column 3 to row 5, left to (2,5), and up column 2 into the dock. I'll go straight for a short stretch, then start the right turn toward the downward heading. <drive> 0.3 throttle 1 steer 0 0.4 throttle 1 steer 1 </drive> |
| 108 | 74.92 | 3.67, 1.681.48 cells/s · 8 cells to go | 0.15 s · throttle 1 · steer +1 0.2 s · throttle 1 · steer 0 | ReplyHeading is 54° and the corridor runs straight down column 3, so I'll swing the nose to straight down first, then drive. <drive> 0.15 throttle 1 steer 1 0.2 throttle 1 steer 0 </drive> |
| 109 | 75.27 | 3.80, 2.161.48 cells/s · 7 cells to go | 0.3 s · throttle 1 · steer +0.5 0.2 s · throttle 1 · steer -0.5 0.4 s · throttle 1 · steer 0 | ReplyThe robot is heading down at x 3.80, but the corridor it needs to follow to the dock is at x 3.50. I'll ease it west with a short steer-right then steer-left before straightening out. <drive> 0.3 throttle 1 steer 0.5 0.2 throttle 1 steer -0.5 0.4 throttle 1 steer 0 </drive> |
| 110 | 76.17 | 3.39, 3.421.55 cells/s · 6 cells to go | 0.25 s · throttle 1 · steer -0.6 0.5 s · throttle 1 · steer 0 | Reply<drive> 0.25 throttle 1 steer -0.6 0.5 throttle 1 steer 0 </drive> |
| 111 | 76.92 | 3.25, 4.521.59 cells/s · 5 cells to go | 0.35 s · throttle 1 · steer 0 0.25 s · throttle 0.6 · steer +1 | Reply<drive> 0.35 throttle 1 steer 0 0.25 throttle 0.6 steer 1 </drive> |
| 112 | 77.52 | 3.20, 5.481.18 cells/s · 4 cells to go | 0.3 s · throttle 0.5 · steer +1 | Reply<drive> 0.3 throttle 0.5 steer 1 </drive> |
| 113 | 77.82 | 3.05, 5.680.74 cells/s · 4 cells to go | 0.4 s · throttle 0.6 · steer +1 0.3 s · throttle 0.6 · steer +1 | Reply<drive> 0.4 throttle 0.6 steer 1 0.3 throttle 0.6 steer 1 </drive> |
| 114 | 78.52 | 2.56, 5.460.88 cells/s · 3 cells to go | 0.2 s · throttle 1 · steer +0.5 0.5 s · throttle 1 · steer 0 1 moved into range | ReplyHeading -100 is slightly left of straight up, so I'll correct right with a short steer, then drive straight up the column to the dock. <drive> 0.2 throttle 1 steer 0.5 0.8 throttle 1 steer 0 </drive> |
| 115 | 79.22 | 2.71, 4.511.59 cells/s · 2 cells to go | 0.3 s · throttle 1 · steer -0.3 0.4 s · throttle 1 · steer 0 0.3 s · throttle 1 · steer 0 | ReplyI'm heading up the column toward the dock, about 1.7 cells ahead. I'll ease the heading back toward straight up with a small left steer, then drive straight through the dock. <drive> 0.3 throttle 1 steer -0.3 0.4 throttle 1 steer 0 0.3 throttle 1 steer 0 </drive> |
| 116 | 80.22 | 2.74, 2.981.73 cells/s · 0 cells to go | 0.2 s · throttle 1 · steer 0 | ReplyThe robot is already inside the dock cell, about 0.54 cells from the dock centre and moving up at 1.73 cells/s. Driving straight up for 0.2 s should bring its centre within the 0.29 radius at about (2.7, 2.63), so I'm not steering. <drive> 0.2 throttle 1 steer 0 </drive> |