MICRO MOUSE BENCHMARK · WORKBENCH

Claude Haiku 5.5 on Workbench maze 2 (level 1-10)

Reached the dock in 24.025 s against the bot's 16.583 s on the same maze, after 33 replies and 9 wall hits. All of Claude Haiku 5.5's runs.

RESULTReached the dock
TIME24.025 s
BOT16.583 s
SCORE69
WALL HITS9
REPLIES33
MODEL TIME14.3 min
COST$0.095 (API-equivalent)
TOKENS IN / OUT81,611 / 173,415
REQUESTS33
The maze and the path it droveSeen from above. The dashed line is the game's bot on the same maze. Each dot marks where a reply began.
Reply 1 at 0.000 sReply 2 at 1.000 sReply 3 at 1.650 sReply 4 at 2.050 sReply 5 at 2.600 sReply 6 at 3.500 sReply 7 at 4.100 sReply 8 at 4.900 sReply 9 at 5.700 sReply 10 at 6.600 sReply 11 at 7.600 sReply 12 at 8.500 sReply 13 at 9.300 sReply 14 at 9.900 sReply 15 at 10.450 sReply 16 at 10.950 sReply 17 at 11.950 sReply 18 at 12.950 sReply 19 at 13.750 sReply 20 at 14.550 sReply 21 at 15.400 sReply 22 at 16.200 sReply 23 at 17.000 sReply 24 at 17.850 sReply 25 at 18.350 sReply 26 at 19.150 sReply 27 at 19.300 sReply 28 at 19.750 sReply 29 at 20.250 sReply 30 at 20.800 sReply 31 at 21.800 sReply 32 at 22.800 sReply 33 at 23.500 s
Its pathThe bot's pathDock

Every reply

Where the robot was when the game paused, how far it still had to go, and the controls the model sent for the next stretch, with anything the game moved, cut or skipped. The run file carries an arcade-session/1 envelope. Its input tape, in the game's own format, replays this exact run at Micro Mouse commit 87bf0cb.

ReplyClock (s)Robot (x, y in cells)Controls sent
10.005.50, 5.500.00 cells/s · 32 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
I'm starting with a straight run left along the bottom row. The route to the dock is 32 cells: left along row 5 to column 3, up through column 3, right and down through column 5 to the top row, left along the top row, down column 0, right along row 5, up column 1, then right and up through the middle to the dock. The first stretch is about 2 cells of straight driving before the first turn.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
21.004.39, 5.501.89 cells/s · 31 cells to go
0.2 s · throttle 1 · steer 0
0.15 s · throttle 1 · steer +1
0.3 s · throttle 1 · steer +1
Reply
The robot is heading left into cell (3,5), which only opens up and right, so it has to turn up soon. I'll start the turn at about x 4.0 and use a radius near 0.5 to reach the corridor at x 3.5. I'll straighten the wheel once it's pointing up.

<drive>
0.2 throttle 1 steer 0
0.15 throttle 1 steer 1
0.3 throttle 1 steer 1
</drive>
31.653.30, 5.301.48 cells/s · 30 cells to go
0.25 s · throttle 1 · steer +1
0.15 s · throttle 1 · steer 0
Reply
<drive>
0.25 throttle 1 steer 1
0.15 throttle 1 steer 0
</drive>
42.053.23, 4.741.48 cells/s · 29 cells to go
0.25 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer +1
Reply
The robot is in the cell (3,4), which opens only up and down. The route to the dock goes up through (3,3), right into (4,3), down and right through (4,4) and (5,4), up column 5 to the top row, then left along the top row before dropping down the left side. The first step is to head up and turn right into (3,3).

<drive>
0.25 throttle 1 steer 0
0.3 throttle 1 steer 1
</drive>
52.603.54, 3.991.48 cells/s · 28 cells to go
0.2 s · throttle 1 · steer +1
0.2 s · throttle 0 · steer 0
0.5 s · throttle 0.3 · steer +1
Reply
<drive>
0.2 throttle 1 steer 1
0.2 throttle 0 steer 0
0.5 throttle 0.3 steer 1
</drive>
63.504.28, 3.920.44 cells/s · 27 cells to go
0.4 s · throttle 0.5 · steer -1
0.2 s · throttle 0.5 · steer -0.6
Reply
I'm turning left toward the open passage at (4,4), then right toward (5,4). The robot is still steering right, so I'll start by bringing the wheel to full left.

<drive>
0.4 throttle 0.5 steer -1
0.2 throttle 0.5 steer -0.6
</drive>
74.104.47, 4.300.74 cells/s · 26 cells to go
0.5 s · throttle 0.6 · steer -1
0.3 s · throttle 0.6 · steer -0.6
Reply
The robot is in the bottom-left-middle of the maze with its heading at 47°, pointing down-right. The route to the dock runs right into cell (5,4), then up column 5 to the top row, west along row 0, down column 0, and back through the middle to the dock. The first move is to swing left and head right toward (5,4) before turning up.

<drive>
0.5 throttle 0.6 steer -1
0.3 throttle 0.6 steer -0.6
</drive>
84.905.07, 4.260.88 cells/s · 25 cells to go
0.3 s · throttle 0.8 · steer 0
0.3 s · throttle 0.8 · steer -0.6
0.2 s · throttle 0.9 · steer 0
Reply
<drive>
0.3 throttle 0.8 steer 0
0.3 throttle 0.8 steer -0.6
0.2 throttle 0.9 steer 0
</drive>
95.705.47, 3.421.34 cells/s · 24 cells to go
0.25 s · throttle 1 · steer -0.4
0.25 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
The only route from here runs up column 5 to row 0, then west along row 0 and down column 0 to row 5, then back up through the column-1 and row-2 corridors to the dock. For now I'm straightening the heading, which is 9° off straight up, and driving north.

<drive>
0.25 throttle 1 steer -0.4
0.25 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
106.605.38, 2.061.69 cells/s · 23 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer -1
1 moved into range1 cut at the one-second limit
Reply
The robot is heading up column 5 with the dock to the upper-left. The route runs up to the top row, left along row 0 to column 0, down column 0 to row 5, then back up through column 1 to row 2, and finally across the top-right loop to the dock. The first move is a short straight run, then a left turn at the top of the maze.

<drive>
0.5 throttle 1 steer 0
0.6 throttle 1 steer -1
0.2 throttle 1 steer 0
</drive>
117.604.92, 0.451.48 cells/s · 20 cells to go
0.1 s · throttle 1 · steer -1
0.5 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
Current state: the robot is in row 0 heading up-left at -161°. The route to the dock goes left along row 0, down column 0, then back across row 2 and row 1 to the dock. The first step is to straighten out to heading -180 (due left) and hold it.

<drive>
0.1 throttle 1 steer -1
0.5 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
128.503.55, 0.571.73 cells/s · 19 cells to go
0.3 s · throttle 1 · steer +0.5
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
I'm heading left along row 0 at 171°, which drifts slightly downward. The route to the dock runs left to cell (0,0), down column 0, right along row 5, up column 1, right along row 2, then up and left into the dock. First I'll straighten the heading to 180° and drive left, then start the turn down column 0 in the next reply.

<drive>
0.3 throttle 1 steer 0.5
0.7 throttle 1 steer 0
</drive>
139.302.35, 0.411.59 cells/s · 18 cells to go
0.2 s · throttle 1 · steer -0.6
0.4 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 1 steer -0.6
0.4 throttle 1 steer 0
</drive>
149.901.46, 0.371.53 cells/s · 17 cells to go
0.25 s · throttle 1 · steer 0
0.3 s · throttle 0.8 · steer -1
Reply
The robot is heading left along the top row. The shortest route to the dock goes left into cell (0,0), then down column 0. I'll drive straight for a moment, then start turning left so the robot can descend without hitting the wall at x = 1.

<drive>
0.25 throttle 1 steer 0
0.3 throttle 0.8 steer -1
</drive>
1510.450.66, 0.461.18 cells/s · 16 cells to go
0.3 s · throttle 0.6 · steer -1
0.2 s · throttle 0.8 · steer 0
Reply
The robot is heading down-left toward the left wall, and the route goes down column 0. I'll keep turning left to bring the heading near 90° (straight down), easing off the throttle so the turn doesn't carry it into the wall.

<drive>
0.3 throttle 0.6 steer -1
0.2 throttle 0.8 steer 0
</drive>
1610.950.45, 0.871.18 cells/s · 16 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
The robot is heading almost straight down column 0, which is the start of the route: down to row 5, right, up column 1, right along row 2, up column 4, then left to the dock. This reply is straight-line driving at full throttle to build speed. I'll start the turn at the bottom in later replies.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
1711.950.36, 2.491.91 cells/s · 14 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
1 cut at the one-second limit
Reply
<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
0.4 throttle 1 steer -1
</drive>
1812.950.24, 4.421.94 cells/s · 12 cells to go
0.3 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer -1
1 moved into range
Reply
<drive>
0.3 throttle 1 steer 0
0.6 throttle 1 steer -1
</drive>
1913.750.42, 5.761.48 cells/s · 11 cells to go
0.5 s · throttle 1 · steer -1
0.2 s · throttle 1 · steer -1
0.1 s · throttle 1 · steer 0
1 wall hit
Reply
<drive>
0.5 throttle 1 steer -1
0.2 throttle 1 steer -1
0.1 throttle 1 steer 0
</drive>
2014.551.20, 5.261.48 cells/s · 10 cells to go
0.15 s · throttle 1 · steer +0.3
0.2 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
2 wall hits1 moved into range
Reply
I'm heading up column 1, which is the first leg of a 10-cell route through (1,4), (1,3), (1,2), then right along row 2, up through column 4, and left along row 1 into the dock. Right now the heading is -98° and the wheel is turned left, so I'll correct to the right first, then drive straight up and check the position before turning.

<drive>
0.15 throttle 1 steer 0.3
0.2 throttle 1 steer 0
1.15 throttle 1 steer 0
</drive>
2115.401.15, 4.051.48 cells/s · 9 cells to go
0.5 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer +1
2 wall hits1 moved into range
Reply
<drive>
0.7 throttle 1 steer 0
0.3 throttle 1 steer 1
</drive>
2216.201.18, 2.901.48 cells/s · 7 cells to go
0.35 s · throttle 1 · steer +1
0.25 s · throttle 1 · steer +1
0.2 s · throttle 1 · steer 0
Reply
<drive>
0.35 throttle 1 steer 1
0.25 throttle 1 steer 1
0.2 throttle 1 steer 0
</drive>
2317.002.13, 2.801.48 cells/s · 6 cells to go
0.35 s · throttle 0.8 · steer -1
0.2 s · throttle 1 · steer -0.3
0.3 s · throttle 1 · steer 0
1 wall hit
Reply
<drive>
0.35 throttle 0.8 steer -1
0.2 throttle 1 steer -0.3
0.3 throttle 1 steer 0
</drive>
2417.852.85, 3.020.02 cells/s · 7 cells to go
0.5 s · throttle 0 · steer -1
1 moved into range
Reply
Heading is -11° and the robot is nearly stopped, so I'll pivot left to face up (-90°) before driving toward the gap at the top of this cell.

<drive>
0.8 throttle 0 steer -1
</drive>
2518.352.85, 3.020.00 cells/s · 7 cells to go
0.3 s · throttle 0.6 · steer -1
0.2 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
1 wall hit
Reply
I'm sending a short first move: turn the robot up toward the corridor at row 2, then accelerate.

<drive>
0.3 throttle 0.6 steer -1
0.2 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
2619.152.73, 2.381.55 cells/s · 6 cells to go
0.15 s · brake · steer +1
Reply
<drive>
0.15 brake steer 1
</drive>
2719.302.70, 2.210.91 cells/s · 6 cells to go
0.15 s · brake · steer +1
0.3 s · throttle 0 · steer +1
1 wall hit
Reply
I'm stopping the upward drift and turning right toward the open passage at (3,2). Heading may not respond exactly as the description says, so I'll check the state after this stretch.

<drive>
0.15 brake steer 1
0.3 throttle 0 steer 1
</drive>
2819.752.70, 2.150.00 cells/s · 6 cells to go
0.3 s · throttle 0 · steer +1
0.2 s · throttle 0.5 · steer +0.4
1 wall hit
Reply
<drive>
0.3 throttle 0 steer 1
0.2 throttle 0.5 steer 0.4
</drive>
2920.252.74, 2.150.45 cells/s · 6 cells to go
0.25 s · throttle 0.6 · steer -0.3
0.3 s · throttle 1 · steer 0
Reply
The robot is against the top wall of cell (2,2), heading slightly down and turning right. The route to the dock goes right through (3,2) and (4,2), then up to (4,1) and left along row 1. I'll straighten the wheel and accelerate east, away from the wall.

<drive>
0.25 throttle 0.6 steer -0.3
0.3 throttle 1 steer 0
</drive>
3020.803.29, 2.211.49 cells/s · 5 cells to go
0.4 s · throttle 1 · steer 0
0.45 s · throttle 1 · steer -1
0.15 s · throttle 1 · steer -1
Reply
I'm at (3.29, 2.21) heading east. The route is east into cell (4,2), then north into (4,1), then west along row 1 to the dock. I'll drive straight to about x 3.9, then make a left U-turn through the corner.

<drive>
0.4 throttle 1 steer 0
0.45 throttle 1 steer -1
0.15 throttle 1 steer -1
</drive>
3121.804.70, 1.911.48 cells/s · 3 cells to go
0.5 s · throttle 1 · steer -1
0.1167 s · throttle 1 · steer -1
0.2 s · throttle 1 · steer 0
0.1833 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer -1
0.12 throttle 1 steer -1
0.2 throttle 1 steer 0
0.18 throttle 1 steer 0
</drive>
3222.803.71, 1.331.48 cells/s · 2 cells to go
0.2 s · throttle 1 · steer +0.4
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
The robot is in cell (3,1) heading 168°, slightly down-left. The route runs straight left through cells 2 and 1, and the dock is only 0.17 cells below the robot's line. I'll steer a little right to bring the heading back toward 180°, then hold straight throttle.

<drive>
0.2 throttle 1 steer 0.4
0.8 throttle 1 steer 0
</drive>
3323.502.67, 1.371.60 cells/s · 1 cells to go
0.4 s · throttle 1 · steer 0
0.2 s · throttle 1 · steer 0
Reply
The robot is 1.17 cells from the dock, heading left along y 1.37. That is only 0.13 below the dock centre, so driving straight left will bring it inside the 0.29 radius at about x 1.76. Holding throttle with no steer should get it there in about 0.6 s.

<drive>
0.4 throttle 1 steer 0
0.2 throttle 1 steer 0
</drive>