Claude Haiku 5.5 on Night Shift maze 2 (level 4-2)
Reached the dock in 37.267 s against the bot's 25.475 s on the same maze, after 53 replies and 3 wall hits. All of Claude Haiku 5.5's runs.
RESULTReached the dock
TIME37.267 s
BOT25.475 s
SCORE68
WALL HITS3
REPLIES53
MODEL TIME23.7 min
COST$0.161 (API-equivalent)
TOKENS IN / OUT143,581 / 289,311
REQUESTS53
Its pathThe bot's pathDockIce
Every reply
Where the robot was when the game paused, how far it still had to go, and the controls the model sent for the next stretch, with anything the game moved, cut or skipped. The run file carries an arcade-session/1 envelope. Its input tape, in the game's own format, replays this exact run at Micro Mouse commit 87bf0cb.
| Reply | Clock (s) | Robot (x, y in cells) | Controls sent | |
|---|---|---|---|---|
| 1 | 0.00 | 3.50, 7.500.00 cells/s · 49 cells to go | 0.3 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 0.2 s · throttle 1 · steer 0 | ReplyRoute from (3,7): west along row 7 to column 0, north up column 0 to row 0, east along row 0 to column 7, south down column 7 to row 7, west to column 4, north up column 4 to row 1, west to column 1, south down column 1 to row 6, then east and north through column 3 and into column 2 to the dock. The first step is to accelerate west along row 7 and keep going. <drive> 0.3 throttle 1 steer 0 0.5 throttle 1 steer 0 0.2 throttle 1 steer 0 </drive> |
| 2 | 1.00 | 2.39, 7.501.89 cells/s · 48 cells to go | 0.3 s · throttle 1 · steer 0 0.35 s · throttle 1 · steer 0 0.35 s · throttle 1 · steer +1 | ReplyThe robot is heading left at 1.89 cells/s toward the corridor at x 0.5, which is the only way out of this cell. I'll keep driving left, then begin a right turn near x 1.2 so it swings up into column 0. <drive> 0.3 throttle 1 steer 0 0.35 throttle 1 steer 0 0.35 throttle 1 steer 1 </drive> |
| 3 | 2.00 | 0.54, 7.391.53 cells/s · 46 cells to go | 0.35 s · throttle 1 · steer +1 0.15 s · throttle 1 · steer 0 | Reply<drive> 0.35 throttle 1 steer 1 0.15 throttle 1 steer 0 </drive> |
| 4 | 2.50 | 0.35, 6.741.48 cells/s · 45 cells to go | 0.2 s · throttle 1 · steer -1 0.2 s · throttle 1 · steer 0 | ReplyHeading -71° is angled toward the wall at x=1, which is closed for row 6. I'll steer left briefly to bring the heading near straight up, then hold straight so the robot climbs column 0. <drive> 0.2 throttle 1 steer -1 0.2 throttle 1 steer 0 </drive> |
| 5 | 2.90 | 0.44, 6.161.48 cells/s · 45 cells to go | 0.5 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 | ReplyThe route runs up column 0 to row 0, right along row 0, then down and around the maze to the dock. For now I'll drive straight up at full throttle and turn right near the top. <drive> 0.5 throttle 1 steer 0 0.5 throttle 1 steer 0 </drive> |
| 6 | 3.90 | 0.36, 4.471.94 cells/s · 43 cells to go | 0.5 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 | ReplyNext 1 s: drive straight up column 0. The route to the dock goes up to row 0, right along row 0, then down column 1, so I'll turn right near the top in later replies. <drive> 0.5 throttle 1 steer 0 0.5 throttle 1 steer 0 </drive> |
| 7 | 4.90 | 0.28, 2.531.94 cells/s · 41 cells to go | 0.5 s · throttle 1 · steer 0 1 moved into range | Reply<drive> 0.9 throttle 1 steer 0 </drive> |
| 8 | 5.40 | 0.24, 1.571.94 cells/s · 40 cells to go | 0.2 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer +1 0.2 s · throttle 1 · steer +1 | ReplyHeading is up, and the route to the dock starts by going up to row 0 and turning right. The turn has to begin about 1.2 in from the top so that the sweep ends near the row centre at y 0.5. Driving straight for 0.2 s first, then steering right, should do that. <drive> 0.2 throttle 1 steer 0 0.5 throttle 1 steer 1 0.2 throttle 1 steer 1 </drive> |
| 9 | 6.30 | 0.74, 0.341.48 cells/s · 39 cells to go | 0.5 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 | ReplyI'm sending the first second straight east along row 0, with the wheel centred so the robot stops curving right. The route to the dock runs east along the top corridor, down column 7, west into column 6, and then through the lower maze. <drive> 0.5 throttle 1 steer 0 0.5 throttle 1 steer 0 </drive> |
| 10 | 7.30 | 2.27, 0.761.84 cells/s · 37 cells to go | 0.3 s · throttle 1 · steer -0.3 0.4 s · throttle 1 · steer 0 0.3 s · throttle 1 · steer 0 2 wall hits | ReplyHeading is 16° while the corridor runs flat, so I'll ease the nose left before holding a straight line east along row 0. <drive> 0.3 throttle 1 steer -0.3 0.4 throttle 1 steer 0 0.3 throttle 1 steer 0 </drive> |
| 11 | 8.30 | 3.77, 0.851.48 cells/s · 36 cells to go | 0.15 s · throttle 1 · steer -0.3 0.35 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 1 wall hit | ReplyThe robot is in the top corridor, heading slightly down toward the bottom wall. I'll straighten it and drive east toward the exit at cell (7,0), which leads down and around to the dock. <drive> 0.15 throttle 1 steer -0.3 0.35 throttle 1 steer 0 0.5 throttle 1 steer 0 </drive> |
| 12 | 9.30 | 5.29, 0.751.74 cells/s · 34 cells to go | 0.5 s · throttle 1 · steer 0 0.2 s · brake · steer 0 | ReplyI'm bringing the robot up to speed along the top corridor, then braking before the corner so it can turn down into column 7. <drive> 0.5 throttle 1 steer 0 0.2 brake </drive> |
| 13 | 10.00 | 6.52, 0.661.09 cells/s · 33 cells to go | 0.3 s · throttle 1 · steer 0 0.4 s · throttle 1 · steer +1 | ReplyHeading east at 1.09 cells/s, I'll drive straight for a moment, then start turning south into the (7,0) to (7,1) gap, keeping x between about 7.15 and 7.85 for the turn. <drive> 0.3 throttle 1 steer 0 0.4 throttle 1 steer 1 </drive> |
| 14 | 10.70 | 7.50, 0.721.48 cells/s · 32 cells to go | 0.3333 s · throttle 1 · steer +1 0.4 s · throttle 1 · steer 0 0.2 s · throttle 1 · steer 0 | ReplyTurning right from heading 43 to 90 at top speed needs about 47 degrees of sweep. Holding full steer for roughly 0.33 s covers that once the wheel's ramp-up and return are counted, and the arc keeps x under the right wall at about 7.66, then I straighten out heading down column 7. <drive> 0.33 throttle 1 steer 1 0.4 throttle 1 steer 0 0.2 throttle 1 steer 0 </drive> |
| 15 | 11.63 | 7.42, 2.011.61 cells/s · 32 cells to go | 0.25 s · throttle 1 · steer -0.6 0.15 s · throttle 1 · steer 0 | ReplyI'm heading down column 7, so I'll use that. The route through the bottom of column 7 and up column 4 is about as long as going back up, and it avoids turning around. I'm starting with a small left steer to bring the heading from 110 toward 90 before the left wall gets close. <drive> 0.25 throttle 1 steer -0.6 0.15 throttle 1 steer 0 </drive> |
| 16 | 12.03 | 7.32, 2.601.48 cells/s · 32 cells to go | 0.5 s · throttle 1 · steer 0 1 moved into range | ReplyThe robot is heading down column 7 with a clear run to row 7. I'll drive straight for this stretch, since a reply covers at most 1 s. <drive> 1.0 throttle 1 steer 0 </drive> |
| 17 | 12.53 | 7.34, 3.371.67 cells/s · 31 cells to go | 0.5 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 | Reply<drive> 0.5 throttle 1 steer 0 0.5 throttle 1 steer 0 </drive> |
| 18 | 13.53 | 7.40, 5.251.94 cells/s · 29 cells to go | 0.5 s · throttle 1 · steer 0 0.4 s · throttle 1 · steer 0 | Reply<drive> 0.5 throttle 1 steer 0 0.4 throttle 1 steer 0 </drive> |
| 19 | 14.43 | 7.46, 6.991.94 cells/s · 28 cells to go | 0.4 s · throttle 1 · steer +1 | ReplyThe robot is at the bottom of cell (7,6) and needs to turn west into the row-7 corridor. Steering right (+1) from heading 88 sweeps it through about 90 degrees toward heading 180, on a curve that stays inside the open cells, and I'm keeping throttle on so it doesn't slow too much. <drive> 0.4 throttle 1 steer 1 </drive> |
| 20 | 14.83 | 7.33, 7.651.48 cells/s · 27 cells to go | 0.25 s · throttle 1 · steer +1 0.5 s · throttle 1 · steer 0 | ReplyCurrent state: the robot is heading down-left toward the bottom wall, about 0.2 cells from it. I'll steer right to bring the heading to roughly 180 (left), then drive left along row 7 toward column 4, which leads up to the dock route. <drive> 0.25 throttle 1 steer 1 0.5 throttle 1 steer 0 </drive> |
| 21 | 15.58 | 6.27, 7.741.55 cells/s · 26 cells to go | 0.4 s · throttle 1 · steer 0 0.3 s · throttle 0.4 · steer 0 | ReplyI'm heading left along the bottom corridor, slightly toward the centre line. I'll hold straight for now and turn up at column 4 on the next reply. <drive> 0.4 throttle 1 steer 0 0.3 throttle 0.4 steer 0 </drive> |
| 22 | 16.28 | 5.19, 7.581.09 cells/s · 25 cells to go | 0.25 s · throttle 0.6 · steer 0 0.5 s · throttle 0.6 · steer +1 0.2 s · throttle 0.6 · steer +0.3 | Reply<drive> 0.25 throttle 0.6 steer 0 0.5 throttle 0.6 steer 1 0.2 throttle 0.6 steer 0.3 </drive> |
| 23 | 17.23 | 4.53, 7.190.88 cells/s · 24 cells to go | 0.2 s · throttle 1 · steer -0.3 0.5 s · throttle 1 · steer 0 1 moved into range | ReplyHeading is -98° and the robot is in column 4, so it needs a small left correction before driving straight up the corridor. <drive> 0.2 throttle 1 steer -0.3 0.8 throttle 1 steer 0 </drive> |
| 24 | 17.93 | 4.35, 6.231.61 cells/s · 23 cells to go | 0.25 s · throttle 1 · steer +0.3 0.25 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 | ReplyThe robot is in column 4, heading -102°, so it needs a small clockwise correction to face straight up. I'll straighten it and keep driving up the corridor toward row 1, where the route turns left. <drive> 0.25 throttle 1 steer 0.3 0.25 throttle 1 steer 0 0.5 throttle 1 steer 0 </drive> |
| 25 | 18.93 | 4.29, 4.681.75 cells/s · 21 cells to go | 0.5 s · throttle 1 · steer 0 0.4 s · throttle 1 · steer 0 1 moved into range | ReplyThe robot is in a dead-end column, and the dock is reached by a long loop: up to row 1, left to column 1, down to row 6, right, up column 3, then left and down into the dock. I'll keep driving straight up for now and start the left turn at about y 2.0. <drive> 0.6 throttle 1 steer 0 0.4 throttle 1 steer 0 </drive> |
| 26 | 19.83 | 4.29, 2.971.94 cells/s · 19 cells to go | 0.45 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer +1 1 moved into range | ReplyHeading up, the robot needs to turn left out of cell (4,1), so I'll drive straight for a short stretch, then steer left. <drive> 0.45 throttle 1 steer 0 0.55 throttle 1 steer 1 </drive> |
| 27 | 20.78 | 4.55, 1.351.48 cells/s · 18 cells to go | 0.35 s · brake · steer 0 0.5 s · throttle 0 · steer -1 0.15 s · throttle 0 · steer -1 | ReplyI'm braking to a stop first, so the robot doesn't carry its drift toward the top wall, then pivoting left to face west along row 1. <drive> 0.35 brake steer 0 0.5 steer -1 0.15 steer -1 </drive> |
| 28 | 21.78 | 4.78, 1.270.00 cells/s · 18 cells to go | 0.5 s · throttle 0 · steer -1 1 moved into range | ReplyThe robot is pressed against the top wall, facing up. The route to the dock starts by heading west along row 1, so I'll pivot left first. <drive> 0.8 throttle 0 steer -1 </drive> |
| 29 | 22.28 | 4.78, 1.270.00 cells/s · 18 cells to go | 0.5 s · throttle 0 · steer -1 0.35 s · throttle 0 · steer -1 | ReplyTurning left in place first. The robot is facing about -78°, and the route west along row 1 needs a heading near 180°. <drive> 0.5 throttle 0 steer -1 0.35 throttle 0 steer -1 </drive> |
| 30 | 23.13 | 4.78, 1.270.00 cells/s · 18 cells to go | 0.5 s · throttle 0 · steer +1 0.3 s · throttle 0.5 · steer 0 | ReplyThe robot is in the top corridor at (4,1), facing down-left. The route to the dock runs left along row 1, down column 1, across row 6, then up column 3 and down column 2 into the dock. First I'll pivot the robot to face left. <drive> 0.5 throttle 0 steer 1 0.3 throttle 0.5 steer 0 </drive> |
| 31 | 23.93 | 4.70, 1.350.69 cells/s · 18 cells to go | 0.3 s · throttle 0 · steer +1 0.15 s · throttle 0 · steer 0 | Reply<drive> 0.3 throttle 0 steer 1 0.15 throttle 0 steer 0 </drive> |
| 32 | 24.38 | 4.64, 1.410.00 cells/s · 18 cells to go | 0.1 s · throttle 0 · steer +1 0.15 s · throttle 0.6 · steer 0 | ReplyI'm at (4,1) and need to head left along row 1, then down column 1, around through (1,6), (3,6), and up column 3 to the dock. The heading is 163°, so I'll pivot slightly right to square up with 180°, then drive forward. <drive> 0.1 throttle 0 steer 1 0.15 throttle 0.6 steer 0 </drive> |
| 33 | 24.63 | 4.62, 1.410.35 cells/s · 18 cells to go | 0.3 s · throttle 1 · steer +0.6 0.2 s · throttle 1 · steer 0 | ReplyI'm at (4.62, 1.41) heading 167°, so the robot is drifting slightly down and needs to turn left. The route runs left along row 1 to column 1, then down column 1 toward the dock. I'll nudge the heading toward 180° and accelerate. <drive> 0.3 throttle 1 steer 0.6 0.2 throttle 1 steer 0 </drive> |
| 34 | 25.13 | 4.16, 1.401.48 cells/s · 18 cells to go | 0.2 s · throttle 1 · steer -0.3 0.1 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 0.2 s · throttle 1 · steer 0 | Reply<drive> 0.2 throttle 1 steer -0.3 0.1 throttle 1 steer 0 0.5 throttle 1 steer 0 0.2 throttle 1 steer 0 </drive> |
| 35 | 26.13 | 2.60, 1.341.78 cells/s · 16 cells to go | 0.3 s · throttle 0 · steer 0 0.3 s · throttle 0.2 · steer -0.6 | ReplyThe robot is in the top row heading left, and the route to the dock goes left into column 1, then down, across the bottom of row 6, up column 3, and down column 2. At 1.78 cells/s it would overshoot the turn and hit the wall below cell (2,1), so I'll slow down and start turning gently. <drive> 0.3 throttle 0 steer 0 0.3 throttle 0.2 steer -0.6 </drive> |
| 36 | 26.73 | 2.00, 1.350.30 cells/s · 15 cells to go | 0.3 s · throttle 0.5 · steer -1 0.2 s · throttle 0.5 · steer -0.3 | ReplyThe robot is at the right edge of cell (1,1), heading down-left. The route to the dock runs down column 1, across row 6, up through (3,3) to (3,2), left into the ice cell (2,2), then straight down column 2. First I need to turn toward straight down (90°) and drop into column 1, so I'll steer left (negative) while still rolling. <drive> 0.3 throttle 0.5 steer -1 0.2 throttle 0.5 steer -0.3 </drive> |
| 37 | 27.23 | 1.79, 1.580.74 cells/s · 15 cells to go | 0.25 s · throttle 0.8 · steer -0.3 0.25 s · throttle 0.8 · steer 0 | ReplyHeading is 106° and the robot needs to head straight down column 1 to (1,6). I'll steer left a little to bring the heading toward 90°, then centre the wheel and check the state. <drive> 0.25 throttle 0.8 steer -0.3 0.25 throttle 0.8 steer 0 </drive> |
| 38 | 27.73 | 1.71, 2.131.18 cells/s · 14 cells to go | 0.25 s · throttle 1 · steer -0.2 0.25 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 | ReplyHeading 94 is nearly straight down the corridor, so I'll correct the slight leftward drift and keep accelerating. The route is down column 1 to row 6, right into (3,6), then up column 3 to the ice, left, and down column 2 into the dock. <drive> 0.25 throttle 1 steer -0.2 0.25 throttle 1 steer 0 0.5 throttle 1 steer 0 </drive> |
| 39 | 28.73 | 1.79, 3.651.76 cells/s · 13 cells to go | 0.15 s · throttle 1 · steer +0.3 0.15 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 | ReplyThe robot is in column 1, and the walls force a detour: down to row 6, east through (2,6) and (3,6), north up column 3 to row 2, then through the ice cells (2,2) and (3,2) and back down column 2 to the dock. Right now it's heading 86°, so it drifts east toward the wall at x=2. First I'll square up the heading, then keep driving down. <drive> 0.15 throttle 1 steer 0.3 0.15 throttle 1 steer 0 0.5 throttle 1 steer 0 </drive> |
| 40 | 29.53 | 1.75, 4.981.81 cells/s · 12 cells to go | 0.5 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer -1 | ReplyThe robot is at (1.75, 4.98) heading down. The route to the dock is: down through (1,5) to (1,6), right through (2,6) to (3,6), up through (3,5) to (3,2), left to (2,2), then down (2,3), (2,4) to the dock. The first step is to drive straight down until the robot is near y 5.9, then turn right into the (1,6) opening. <drive> 0.5 throttle 1 steer 0 0.5 throttle 1 steer -1 </drive> |
| 41 | 30.53 | 1.94, 6.691.48 cells/s · 10 cells to go | 0.1 s · throttle 1 · steer -1 0.15 s · throttle 1 · steer 0 | Reply<drive> 0.1 throttle 1 steer -1 0.15 throttle 1 steer 0 </drive> |
| 42 | 30.78 | 2.29, 6.791.48 cells/s · 9 cells to go | 0.4 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer -1 1 moved into range | ReplyThe route runs right into cell (3,6), then up the column x=3.5 through (3,5), (3,4), (3,3), then left across the ice at row 2 and down into the dock. This segment drives straight to about x 2.9, then turns left toward heading up. The wheel lag means the turn starts a bit late, so I'm starting it early enough to clear the right wall at x=4. <drive> 0.4 throttle 1 steer 0 0.55 throttle 1 steer -1 </drive> |
| 43 | 31.68 | 3.55, 6.551.48 cells/s · 8 cells to go | 0.15 s · throttle 1 · steer -1 0.25 s · throttle 1 · steer 0 | ReplyThe robot is in cell (3,6) and the route to the dock runs up column 3, then left through the ice at row 2, then down column 2. The robot is heading -63 with the wheel at full left, so I'll straighten it toward straight up (-90) first. <drive> 0.15 throttle 1 steer -1 0.25 throttle 1 steer 0 </drive> |
| 44 | 32.08 | 3.60, 5.981.48 cells/s · 7 cells to go | 0.2 s · throttle 1 · steer +0.5 0.5 s · throttle 1 · steer 0 1 moved into range | ReplyThe robot is moving up column 3 at heading -100, and the route runs up to row 2, then left and down column 2 to the dock. First I'll correct the heading toward straight up, then keep driving north. <drive> 0.2 throttle 1 steer 0.5 0.8 throttle 1 steer 0 </drive> |
| 45 | 32.78 | 3.62, 4.941.59 cells/s · 6 cells to go | 0.15 s · throttle 1 · steer -0.25 0.35 s · throttle 1 · steer 0 0.3 s · throttle 1 · steer 0 | ReplyI'm steering the robot up column 3 first, then left through the ice cells toward the dock. The first stretch corrects the -85 heading toward straight up. <drive> 0.15 throttle 1 steer -0.25 0.35 throttle 1 steer 0 0.3 throttle 1 steer 0 </drive> |
| 46 | 33.58 | 3.63, 3.701.70 cells/s · 5 cells to go | 0.2 s · throttle 1 · steer 0 0.3 s · throttle 1 · steer -0.8 | ReplyThe robot is in the right column but heading the wrong way. The route to the dock runs up through (3,2), left into (2,2), then down column 2. I'll drive straight up to the gap, then start the left turn. <drive> 0.2 throttle 1 steer 0 0.3 throttle 1 steer -0.8 </drive> |
| 47 | 34.08 | 3.56, 2.861.50 cells/s · 4 cells to go | 0.25 s · throttle 1 · steer -1 0.25 s · throttle 1 · steer -0.6 | Reply<drive> 0.25 throttle 1 steer -1 0.25 throttle 1 steer -0.6 </drive> |
| 48 | 34.58 | 3.00, 2.431.51 cells/s · 3 cells to go | 0.3 s · brake · steer -1 0.3 s · throttle 0 · steer -1 | Reply<drive> 0.3 brake steer -1 0.3 steer -1 </drive> |
| 49 | 35.18 | 2.77, 2.500.00 cells/s · 3 cells to go | 0.15 s · throttle 0 · steer 0 0.3 s · throttle 0.5 · steer 0 | ReplyThe robot is pivoting at 96° with the wheel still at full left, so I'll centre the wheel first, then roll gently down the column toward the dock. <drive> 0.15 throttle 0 steer 0 0.3 throttle 0.5 steer 0 </drive> |
| 50 | 35.63 | 2.78, 2.600.69 cells/s · 3 cells to go | 0.2 s · throttle 1 · steer +0.3 0.4 s · throttle 1 · steer 0 | ReplyThe robot is in cell (2,2), facing almost straight down, and the dock is directly below at (2.50, 5.50). I'm 0.28 cells right of the dock's centre, so I'll steer slightly left, then hold a straight line that drifts toward the centre line. <drive> 0.2 throttle 1 steer 0.3 0.4 throttle 1 steer 0 </drive> |
| 51 | 36.23 | 2.71, 3.361.55 cells/s · 2 cells to go | 0.5 s · throttle 1 · steer 0 1 moved into range | ReplyThe robot is heading almost straight down the column toward the dock, which is a dead end below it. At the current heading it should pass within about 0.05 cells of the dock centre, so I'll hold the controls and check again. <drive> 0.8 throttle 1 steer 0 </drive> |
| 52 | 36.73 | 2.61, 4.211.84 cells/s · 1 cells to go | 0.5 s · throttle 1 · steer 0 | Reply<drive> 0.5 throttle 1 steer 0 </drive> |
| 53 | 37.23 | 2.49, 5.161.94 cells/s · 0 cells to go | 0.1 s · throttle 1 · steer 0 | ReplyThe robot is about 0.34 cells above the dock centre and moving down at 1.94 cells/s. It enters the dock circle after roughly 0.05 cells, so a short push with full throttle and no steering should finish the run. <drive> 0.1 throttle 1 steer 0 </drive> |