MICRO MOUSE BENCHMARK · COLD STORAGE

Claude Haiku 5.5 on Cold Storage maze 2 (level 2-1)

Reached the dock in 18.708 s against the bot's 12.075 s on the same maze, after 27 replies and 2 wall hits. All of Claude Haiku 5.5's runs.

RESULTReached the dock
TIME18.708 s
BOT12.075 s
SCORE65
WALL HITS2
REPLIES27
MODEL TIME9.4 min
COST$0.063 (API-equivalent)
TOKENS IN / OUT68,245 / 110,672
REQUESTS27
The maze and the path it droveSeen from above. The dashed line is the game's bot on the same maze. Each dot marks where a reply began.
Reply 1 at 0.000 sReply 2 at 0.500 sReply 3 at 1.150 sReply 4 at 1.900 sReply 5 at 2.700 sReply 6 at 3.300 sReply 7 at 4.300 sReply 8 at 5.050 sReply 9 at 5.450 sReply 10 at 5.950 sReply 11 at 6.700 sReply 12 at 7.450 sReply 13 at 8.450 sReply 14 at 9.450 sReply 15 at 9.950 sReply 16 at 10.550 sReply 17 at 11.050 sReply 18 at 11.750 sReply 19 at 12.750 sReply 20 at 13.750 sReply 21 at 14.050 sReply 22 at 14.550 sReply 23 at 15.550 sReply 24 at 16.150 sReply 25 at 16.850 sReply 26 at 17.600 sReply 27 at 18.600 s
Its pathThe bot's pathDockIce

Every reply

Where the robot was when the game paused, how far it still had to go, and the controls the model sent for the next stretch, with anything the game moved, cut or skipped. The run file carries an arcade-session/1 envelope. Its input tape, in the game's own format, replays this exact run at Micro Mouse commit 87bf0cb.

ReplyClock (s)Robot (x, y in cells)Controls sent
10.001.50, 2.500.00 cells/s · 24 cells to go
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
I'm starting with a straight run left out of the robot's cell. The planned route is left to (0,2), up column 0 to the top row, right along the top to (4,0), down column 4 to (4,4), left along row 4 to (0,4), down to the bottom row, right to (5,5), then up column 5 to the dock. The corners are tight, so I'll slow for them.

<drive>
0.6 throttle 1 steer 0
</drive>
20.501.21, 2.501.16 cells/s · 24 cells to go
0.35 s · throttle 0.5 · steer 0
0.3 s · throttle 0.4 · steer +1
Reply
<drive>
0.35 throttle 0.5 steer 0
0.3 throttle 0.4 steer 1
</drive>
31.150.73, 2.480.60 cells/s · 23 cells to go
0.3 s · throttle 0.5 · steer +1
0.25 s · throttle 0.6 · steer +1
0.2 s · throttle 0.7 · steer 0
Reply
The robot is heading left toward the west wall, and the only way out of this cell is up through the gap into (0,1). I'll turn right to point it upward, then straighten out and keep moving.

<drive>
0.3 throttle 0.5 steer 1
0.25 throttle 0.6 steer 1
0.2 throttle 0.7 steer 0
</drive>
41.900.61, 1.941.04 cells/s · 22 cells to go
0.3 s · throttle 0.5 · steer -1
0.5 s · throttle 0.5 · steer 0
Reply
The robot is in cell (0,1), where the only exits are up and down. The route to the dock runs up through (0,0) and (1,0), down through (1,1), (2,1), (2,2), (3,2), then left along row 3 and down to the bottom row, which leads to the dock column. Turning left to straighten up toward (0,0) comes first. I'm keeping this reply short so I can check the heading and wall clearance before the next turn.

<drive>
0.3 throttle 0.5 steer -1
0.5 throttle 0.5 steer 0
</drive>
52.700.62, 1.350.74 cells/s · 22 cells to go
0.3 s · throttle 0.7 · steer +0.3
0.3 s · throttle 0.8 · steer 0
Reply
The robot is in the left column and needs to go up into cell (0,0), then right along the top row and down through the opening into (1,1). I'm easing the heading toward straight up first, since the wall at x=1 blocks the right side while y is between 1 and 2.

<drive>
0.3 throttle 0.7 steer 0.3
0.3 throttle 0.8 steer 0
</drive>
63.300.60, 0.711.18 cells/s · 21 cells to go
0.3 s · throttle 0 · steer +1
0.3 s · throttle 0 · steer +1
0.2 s · throttle 1 · steer +0.6
0.2 s · throttle 1 · steer 0
Reply
The robot is heading up toward the top wall, and the route runs right along the top row, so it needs to turn clockwise. It's too fast to turn that tightly without hitting the wall, so I'll coast to slow it down while steering hard right.

<drive>
0.3 throttle 0 steer 1
0.3 throttle 0 steer 1
0.2 throttle 1 steer 0.6
0.2 throttle 1 steer 0
</drive>
74.300.82, 0.430.92 cells/s · 21 cells to go
0.25 s · throttle 1 · steer +0.5
0.5 s · throttle 1 · steer 0
Reply
The robot is at (0.82, 0.43) heading -7°. The route runs right along row 0 to column 4, then down column 4, then through row 5 and up column 5 to the dock. This first stretch straightens the heading to roughly 0° and starts the run along row 0.

<drive>
0.25 throttle 1 steer 0.5
0.5 throttle 1 steer 0
</drive>
85.051.86, 0.561.59 cells/s · 20 cells to go
0.15 s · throttle 1 · steer -0.5
0.25 s · throttle 1 · steer 0
Reply
I'm straightening the heading first. At 11 degrees, the robot would drift down toward the wall corner at (4, 1) before it reaches the turn into column 4.

<drive>
0.15 throttle 1 steer -0.5
0.25 throttle 1 steer 0
</drive>
95.452.46, 0.611.48 cells/s · 21 cells to go
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
Heading right along row 0 toward the cell (4,0), which opens down into column 4. This segment drives straight to about x 3.87, where the turn into column 4 can start next.

<drive>
0.95 throttle 1 steer 0
</drive>
105.953.26, 0.621.74 cells/s · 20 cells to go
0.4 s · throttle 1 · steer 0
0.35 s · throttle 1 · steer +1
Reply
The robot is in cell (3,0), which opens only left and right. The dock at (5,0) is walled off from the left, so the route runs right into (4,0), down column 4, then west along row 4 and row 5 before coming back up column 5. Next I'll drive straight to about x 4.0, then start a right turn to head down column 4.

<drive>
0.4 throttle 1 steer 0
0.35 throttle 1 steer 1
</drive>
116.704.59, 0.751.53 cells/s · 19 cells to go
0.25 s · throttle 1 · steer +1
0.1 s · throttle 1 · steer +0.5
0.4 s · throttle 1 · steer 0
Reply
I'm turning right and driving down the column toward row 4. The robot is heading straight at the wall between (4,0) and the dock, so it needs to turn down first. The turn peaks at about x 4.77, just inside the 4.85 limit.

<drive>
0.25 throttle 1 steer 1
0.1 throttle 1 steer 0.5
0.4 throttle 1 steer 0
</drive>
127.454.73, 1.791.52 cells/s · 18 cells to go
0.3 s · throttle 1 · steer -0.3
0.4 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.3 throttle 1 steer -0.3
0.4 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
138.454.80, 3.311.73 cells/s · 16 cells to go
0.3 s · brake · steer 0
0.3 s · throttle 0.3 · steer +1
0.15 s · throttle 0.5 · steer +0.3
0.25 s · throttle 0.6 · steer 0
Reply
I'm braking first to shed the speed, then turning the nose toward the cell below before heading into it.

<drive>
0.3 brake
0.3 throttle 0.3 steer 1
0.15 throttle 0.5 steer 0.3
0.25 throttle 0.6 steer 0
</drive>
149.454.67, 4.030.88 cells/s · 15 cells to go
0.35 s · throttle 0.8 · steer +1
0.15 s · throttle 0.8 · steer 0
Reply
<drive>
0.35 throttle 0.8 steer 1
0.15 throttle 0.8 steer 0
</drive>
159.954.23, 4.351.18 cells/s · 15 cells to go
0.2 s · throttle 1 · steer +0.4
0.2 s · throttle 1 · steer -0.2
0.2 s · throttle 1 · steer 0
Reply
Heading 170 is pulling the robot down toward the wall at y 5, so I'll turn it back to 180 with a light right steer and keep throttle on. The route runs left along row 4 to (0,4), then down to row 5, right to (5,5), and up column 5 to the dock.

<drive>
0.2 throttle 1 steer 0.4
0.2 throttle 1 steer -0.2
0.2 throttle 1 steer 0
</drive>
1610.553.37, 4.371.48 cells/s · 14 cells to go
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
Robot is in a dead-end corridor facing left. The 14-cell route is left along row 4 to column 0, down to row 5, right along row 5, then up column 5 to the dock. I'll drive straight left first and reassess before the corner.

<drive>
0.8 throttle 1 steer 0
</drive>
1711.052.57, 4.361.73 cells/s · 13 cells to go
0.5 s · throttle 1 · steer 0
0.2 s · throttle 1 · steer -1
1 moved into range
Reply
Turning left toward cell (0,4) now, so I'll drive straight for a bit, then start the turn so the robot drops down through the gap into row 5.

<drive>
0.8 throttle 1 steer 0
0.2 throttle 1 steer -1
</drive>
1811.751.28, 4.351.72 cells/s · 12 cells to go
0.5 s · throttle 1 · steer -1
0.5 s · throttle 1 · steer -1
Reply
The robot is heading left toward the open bottom of cell (0,4). The route goes left into (0,4), down into the bottom corridor (row 5), east along it, then north up column 5 to the dock. I'll hold a full left turn for the next second so the robot swings down and then east. I'll straighten out on the next reply.

<drive>
0.5 throttle 1 steer -1
0.5 throttle 1 steer -1
</drive>
1912.751.28, 5.371.48 cells/s · 9 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
1 wall hit
Reply
The robot is in row 5 heading east. The route to the dock runs along row 5 to column 5, then north up column 5 to the dock, which is 9 cells. I'll drive straight for the first second and check the position before starting the turn.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
2013.752.78, 5.151.49 cells/s · 8 cells to go
0.1 s · throttle 1 · steer +1
0.2 s · throttle 1 · steer 0
1 wall hit
Reply
The robot is at y 5.15, right against the wall above it, and heading -12° drifts toward that wall. I'll steer right to bring the heading back to 0° before going further.

<drive>
0.1 throttle 1 steer 1
0.2 throttle 1 steer 0
</drive>
2114.053.21, 5.151.44 cells/s · 7 cells to go
0.3 s · throttle 1 · steer +0.6
0.2 s · throttle 1 · steer 0
Reply
<drive>
0.3 throttle 1 steer 0.6
0.2 throttle 1 steer 0
</drive>
2214.553.93, 5.271.48 cells/s · 7 cells to go
0.15 s · throttle 1 · steer -0.5
0.5 s · throttle 1 · steer 0
0.35 s · throttle 1 · steer -1
Reply
The robot is in row 5, so I'll drive right to column 5, then turn up toward the dock. This reply straightens the heading and starts the turn.

<drive>
0.15 throttle 1 steer -0.5
0.5 throttle 1 steer 0
0.35 throttle 1 steer -1
</drive>
2315.555.39, 5.461.48 cells/s · 5 cells to go
0.35 s · throttle 1 · steer -1
0.25 s · throttle 1 · steer 0
Reply
The robot is at the bottom-right corner, heading up-right. The column above it (x 5.5, cells (5,4) to (5,0)) is a straight corridor to the dock, so I need to swing the nose up and keep it centred. I'll turn left at full throttle, then straighten up.

<drive>
0.35 throttle 1 steer -1
0.25 throttle 1 steer 0
</drive>
2416.155.66, 4.701.48 cells/s · 4 cells to go
0.2 s · throttle 1 · steer +0.5
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
<drive>
0.2 throttle 1 steer 0.5
0.8 throttle 1 steer 0
</drive>
2516.855.70, 3.661.59 cells/s · 3 cells to go
0.25 s · throttle 1 · steer -0.4
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
<drive>
0.25 throttle 1 steer -0.4
0.75 throttle 1 steer 0
</drive>
2617.605.59, 2.541.60 cells/s · 2 cells to go
0.15 s · throttle 1 · steer +0.3
0.3 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
0.15 s · throttle 1 · steer 0
1 cut at the one-second limit
Reply
<drive>
0.15 throttle 1 steer 0.3
0.3 throttle 1 steer 0
0.4 throttle 1 steer 0
0.35 throttle 1 steer 0
</drive>
2718.605.47, 0.961.81 cells/s · 0 cells to go
0.1167 s · throttle 0 · steer 0
Reply
The robot is 0.46 cells below the dock centre, heading up at 1.81 cells/s. It needs to travel about 0.17 cells to reach the dock's 0.29 radius. Coasting with no controls covers that in roughly 0.1 s, and the robot's slight leftward drift at -93 degrees is negligible.

<drive>
0.12 throttle 0 steer 0
</drive>