MICRO MOUSE BENCHMARK · COLD STORAGE

Claude Sonnet 5.5 on Cold Storage maze 2 (level 2-1)

Reached the dock in 16.608 s against the bot's 12.075 s on the same maze, after 19 replies and 0 wall hits. All of Claude Sonnet 5.5's runs.

RESULTReached the dock
TIME16.608 s
BOT12.075 s
SCORE73
WALL HITS0
REPLIES19
MODEL TIME3.6 min
COST$0.337 (API-equivalent)
TOKENS IN / OUT47,690 / 23,832
REQUESTS19
The maze and the path it droveSeen from above. The dashed line is the game's bot on the same maze. Each dot marks where a reply began.
Reply 1 at 0.000 sReply 2 at 1.000 sReply 3 at 2.000 sReply 4 at 3.000 sReply 5 at 3.500 sReply 6 at 4.500 sReply 7 at 5.350 sReply 8 at 6.050 sReply 9 at 6.950 sReply 10 at 7.950 sReply 11 at 8.950 sReply 12 at 9.750 sReply 13 at 10.350 sReply 14 at 10.950 sReply 15 at 11.850 sReply 16 at 12.850 sReply 17 at 13.850 sReply 18 at 14.850 sReply 19 at 15.850 s
Its pathThe bot's pathDockIce

Every reply

Where the robot was when the game paused, how far it still had to go, and the controls the model sent for the next stretch, with anything the game moved, cut or skipped. The run file carries an arcade-session/1 envelope. Its input tape, in the game's own format, replays this exact run at Micro Mouse commit 87bf0cb.

ReplyClock (s)Robot (x, y in cells)Controls sent
10.001.50, 2.500.00 cells/s · 24 cells to go
0.5 s · throttle 1 · steer 0
0.25 s · throttle 1 · steer 0
0.25 s · throttle 0.8 · steer +1
Reply
I'm starting along the route: left out of this cell, then up the left column and along row 0.

<drive>
0.5 throttle 1 steer 0
0.25 throttle 1 steer 0
0.25 throttle 0.8 steer 1
</drive>
21.000.49, 2.471.18 cells/s · 23 cells to go
0.15 s · brake · steer +1
0.35 s · throttle 0.6 · steer +1
0.2 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.15 brake steer 1
0.35 throttle 0.6 steer 1
0.2 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
32.000.41, 1.521.55 cells/s · 22 cells to go
0.15 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer +1
0.2 s · throttle 1 · steer 0
0.25 s · throttle 1 · steer 0
Reply
I'm sending the robot up into cell (0,0), then turning right into the corridor along row 0 toward (1,0). The turn starts early so it doesn't clip the top wall.

<drive>
0.15 throttle 1 steer 0
0.4 throttle 1 steer 1
0.2 throttle 1 steer 0
0.25 throttle 1 steer 0
</drive>
43.001.37, 0.531.52 cells/s · 20 cells to go
0.15 s · throttle 1 · steer +1
0.1 s · throttle 1 · steer 0
0.25 s · throttle 1 · steer 0
Reply
Cell (1,0) is open to the right, so I'm taking the non-ice route. It runs along row 0 to cell (4,0), down column 4, left along row 4, down to row 5, right along row 5, then up column 5 to the dock. It is 22 cells against 20 for the route through the ice, but it has long straights and no ice. First I'm straightening the heading from -18° to about 0°, then driving flat out along row 0.

<drive>
0.15 throttle 1 steer 1
0.1 throttle 1 steer 0
0.25 throttle 1 steer 0
</drive>
53.502.10, 0.411.49 cells/s · 21 cells to go
0.1 s · throttle 1 · steer +0.3
0.4 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.1 throttle 1 steer 0.3
0.4 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
64.503.69, 0.351.84 cells/s · 20 cells to go
0.15 s · throttle 1 · steer 0
0.5 s · throttle 0.7 · steer +1
0.2 s · throttle 1 · steer 0
Reply
Next I'm turning right at the cell-4 column so the robot heads down toward the long route to the dock.

<drive>
0.15 throttle 1 steer 0
0.5 throttle 0.7 steer 1
0.2 throttle 1 steer 0
</drive>
75.354.71, 0.741.48 cells/s · 19 cells to go
0.2 s · throttle 1 · steer +1
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
Cell (4,0) opens only down and left, so I'm taking the long route. It goes down column 4 to row 4, left to column 0, down to row 5, right along row 5, then up column 5 to the dock. I'm turning right a little to straighten from heading 69 to about 90 (straight down), then driving straight.

<drive>
0.2 throttle 1 steer 1
0.8 throttle 1 steer 0
</drive>
86.054.81, 1.761.57 cells/s · 18 cells to go
0.1 s · throttle 1 · steer +0.3
0.1 s · throttle 1 · steer -0.3
0.4 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.1 throttle 1 steer 0.3
0.1 throttle 1 steer -0.3
0.4 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
96.954.70, 3.171.77 cells/s · 16 cells to go
0.4 s · throttle 1 · steer 0
0.5 s · throttle 0.7 · steer +1
0.1 s · throttle 1 · steer 0
Reply
Heading down now. The route turns left at the bottom of this corridor and runs along row 4, so I drive straight, then steer right into the turn.

<drive>
0.4 throttle 1 steer 0
0.5 throttle 0.7 steer 1
0.1 throttle 1 steer 0
</drive>
107.954.28, 4.561.25 cells/s · 15 cells to go
0.15 s · throttle 1 · steer +0.4
0.5 s · throttle 1 · steer 0
0.35 s · throttle 1 · steer 0
Reply
I'm lining up along row 4 and then heading left. The route runs left to cell (0,4), down to row 5, right along row 5, then up column 5 to the dock.

<drive>
0.15 throttle 1 steer 0.4
0.5 throttle 1 steer 0
0.35 throttle 1 steer 0
</drive>
118.952.73, 4.691.80 cells/s · 13 cells to go
0.15 s · throttle 1 · steer +0.4
0.15 s · throttle 1 · steer -0.3
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
<drive>
0.15 throttle 1 steer 0.4
0.15 throttle 1 steer -0.3
0.7 throttle 1 steer 0
</drive>
129.751.45, 4.591.68 cells/s · 12 cells to go
0.2 s · throttle 0.8 · steer 0
0.4 s · throttle 0.8 · steer -1
Reply
<drive>
0.2 throttle 0.8 steer 0
0.4 throttle 0.8 steer -1
</drive>
1310.350.71, 4.631.18 cells/s · 11 cells to go
0.5 s · throttle 0.7 · steer -1
0.1 s · throttle 0.7 · steer -1
Reply
The robot is in cell (0,4) and needs to drop to (0,5), then run east along row 5 and up column 5 to the dock. The left lock is already on, so I'll keep it on to sweep from heading 142 round to roughly 40 degrees, then reassess.

<drive>
0.5 throttle 0.7 steer -1
0.1 throttle 0.7 steer -1
</drive>
1410.950.60, 5.181.04 cells/s · 10 cells to go
0.3 s · throttle 1 · steer -1
0.1 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
I'm turning left from heading 50° to about 0°, then driving straight along row 5. The route runs right along the bottom row to column 5, then up column 5 to the dock.

<drive>
0.3 throttle 1 steer -1
0.1 throttle 1 steer 0
0.6 throttle 1 steer 0
</drive>
1511.851.83, 5.231.61 cells/s · 9 cells to go
0.15 s · throttle 1 · steer +1
0.35 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.15 throttle 1 steer 1
0.35 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
1612.853.40, 5.221.78 cells/s · 7 cells to go
0.5 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
0.2 s · throttle 1 · steer -1
Reply
<drive>
0.5 throttle 1 steer 0
0.3 throttle 1 steer 0
0.2 throttle 1 steer -1
</drive>
1713.855.29, 5.241.72 cells/s · 5 cells to go
0.4 s · throttle 1 · steer -1
0.1 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
Heading is still 77° off the straight-up run along column 5, so I'll hold full left steer, then centre the wheel and drive straight up.

<drive>
0.4 throttle 1 steer -1
0.1 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
1814.855.76, 3.981.61 cells/s · 3 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
Column 5 is open all the way up to the dock, so I'm driving straight up. The robot is 0.26 cells right of the dock centre, which is inside the dock's 0.29 radius, so no steering correction is needed.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
1915.855.74, 2.131.94 cells/s · 2 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
Heading straight up the column to the dock. The robot is already within the dock's radius horizontally, so no steering is needed.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>