MICRO MOUSE BENCHMARK · WORKBENCH

Claude Sonnet 5.5 on Workbench maze 2 (level 1-10)

Reached the dock in 23.658 s against the bot's 16.583 s on the same maze, after 32 replies and 7 wall hits. All of Claude Sonnet 5.5's runs.

RESULTReached the dock
TIME23.658 s
BOT16.583 s
SCORE70
WALL HITS7
REPLIES32
MODEL TIME6.9 min
COST$0.626 (API-equivalent)
TOKENS IN / OUT78,246 / 47,151
REQUESTS32
The maze and the path it droveSeen from above. The dashed line is the game's bot on the same maze. Each dot marks where a reply began.
Reply 1 at 0.000 sReply 2 at 0.500 sReply 3 at 1.300 sReply 4 at 2.150 sReply 5 at 3.100 sReply 6 at 3.900 sReply 7 at 4.650 sReply 8 at 5.400 sReply 9 at 5.800 sReply 10 at 6.300 sReply 11 at 7.100 sReply 12 at 8.100 sReply 13 at 9.100 sReply 14 at 9.600 sReply 15 at 10.200 sReply 16 at 11.200 sReply 17 at 12.200 sReply 18 at 13.200 sReply 19 at 13.950 sReply 20 at 14.950 sReply 21 at 15.450 sReply 22 at 16.300 sReply 23 at 16.900 sReply 24 at 17.400 sReply 25 at 18.000 sReply 26 at 18.900 sReply 27 at 19.350 sReply 28 at 20.050 sReply 29 at 20.400 sReply 30 at 21.100 sReply 31 at 22.050 sReply 32 at 23.050 s
Its pathThe bot's pathDock

Every reply

Where the robot was when the game paused, how far it still had to go, and the controls the model sent for the next stretch, with anything the game moved, cut or skipped. The run file carries an arcade-session/1 envelope. Its input tape, in the game's own format, replays this exact run at Micro Mouse commit 87bf0cb.

ReplyClock (s)Robot (x, y in cells)Controls sent
10.005.50, 5.500.00 cells/s · 32 cells to go
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
Driving left along the bottom row first. The route to the dock is long: left to (3,5), up to (3,3), right and down around to (5,4), up the right column to row 0, across to column 0, down and back along the lower rows, and finally up and across to the dock.

<drive>
1.0 throttle 1 steer 0
</drive>
20.505.21, 5.501.16 cells/s · 32 cells to go
0.5 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
Driving straight along the bottom row toward the cell at (3,5), where the route turns up.

<drive>
0.5 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
31.303.81, 5.501.94 cells/s · 30 cells to go
0.35 s · brake · steer 0
0.5 s · throttle 0 · steer +1
Reply
Cell (3,5) is closed on the left, so I need to turn up at x≈3.5. I'm too close and too fast for a clean arc, so I'm braking hard first and then pivoting right to face up.

<drive>
0.35 throttle 1 reverse 1 brake steer 0
0.5 steer 1
</drive>
42.153.36, 5.500.00 cells/s · 30 cells to go
0.35 s · throttle 0 · steer +1
0.3 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.35 throttle 0 steer 1
0.3 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
53.103.39, 5.081.39 cells/s · 30 cells to go
0.5 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
63.903.49, 3.641.94 cells/s · 28 cells to go
0.35 s · brake · steer +1
0.4 s · throttle 0.6 · steer +1
1 wall hit
Reply
I'm brake-turning because the robot is heading straight into the wall above it, and the route goes right into cell (4,3).

<drive>
0.35 brake steer 1
0.4 throttle 0.6 steer 1
</drive>
74.653.84, 3.150.88 cells/s · 28 cells to go
0.3 s · throttle 1 · steer 0
0.45 s · throttle 0.7 · steer +1
Reply
<drive>
0.3 throttle 1 steer 0
0.45 throttle 0.7 steer 1
</drive>
85.404.61, 3.491.04 cells/s · 27 cells to go
0.2 s · throttle 1 · steer 0
0.2 s · throttle 0.8 · steer 0
Reply
I'm straightening the robot out to head down into cell (4,4), then I'll turn right toward (5,4) and up the right-hand column.

<drive>
0.2 throttle 1 steer 0
0.2 throttle 0.8 steer 0
</drive>
95.804.74, 3.971.18 cells/s · 27 cells to go
0.3 s · throttle 0.6 · steer -1
0.2 s · throttle 0.6 · steer -1
Reply
Routing: from (4,3) the only way on is down to (4,4), right to (5,4), then up column 5. I'll start turning left from heading 77° toward east, with moderate throttle so I don't hit the wall.

<drive>
0.3 throttle 0.6 steer -1
0.2 throttle 0.6 steer -1
</drive>
106.304.97, 4.350.88 cells/s · 26 cells to go
0.5 s · throttle 0.4 · steer -1
0.3 s · throttle 0.5 · steer -0.3
Reply
I'm turning left toward the opening above. Next I'll straighten the wheel and head up through the cell edge at y 4.

<drive>
0.5 throttle 0.4 steer -1
0.3 throttle 0.5 steer -0.3
</drive>
117.105.37, 4.120.74 cells/s · 25 cells to go
0.3 s · throttle 1 · steer -0.3
0.4 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
Heading up column 5 first, since the route to the dock goes up to row 0 and then left.

<drive>
0.3 throttle 1 steer -0.3
0.4 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
128.105.56, 2.721.73 cells/s · 23 cells to go
0.2 s · throttle 1 · steer -0.2
0.3 s · throttle 1 · steer +0.05
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 1 steer -0.2
0.3 throttle 1 steer 0.05
0.5 throttle 1 steer 0
</drive>
139.105.59, 1.121.80 cells/s · 22 cells to go
0.5 s · throttle 1 · steer -1
Reply
<drive>
0.5 throttle 1 steer -1
</drive>
149.605.34, 0.411.48 cells/s · 21 cells to go
0.15 s · throttle 0.6 · steer -1
0.15 s · throttle 0.6 · steer +0.5
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.15 throttle 0.6 steer -1
0.15 throttle 0.6 steer 0.5
0.3 throttle 1 steer 0
</drive>
1510.204.67, 0.431.48 cells/s · 20 cells to go
0.15 s · throttle 1 · steer +0.5
0.4 s · throttle 1 · steer 0
0.45 s · throttle 1 · steer +0.1
Reply
Still heading left along row 0 toward column 0. I'm easing the heading from 166° to about 176° to line up with the row, then holding it straight.

<drive>
0.15 throttle 1 steer 0.5
0.4 throttle 1 steer 0
0.45 throttle 1 steer 0.1
</drive>
1611.203.12, 0.531.79 cells/s · 19 cells to go
0.2 s · throttle 1 · steer -0.3
0.5 s · throttle 1 · steer 0
0.3 s · throttle 0.8 · steer 0
Reply
<drive>
0.2 throttle 1 steer -0.3
0.5 throttle 1 steer 0
0.3 throttle 0.8 steer 0
</drive>
1712.201.53, 0.621.18 cells/s · 17 cells to go
0.3 s · throttle 1 · steer 0
0.45 s · throttle 0.6 · steer -1
0.25 s · throttle 0.6 · steer 0
Reply
Heading left along row 0 toward column 0, then I'll turn down the column.

<drive>
0.3 throttle 1 steer 0
0.45 throttle 0.6 steer -1
0.25 throttle 0.6 steer 0
</drive>
1813.200.56, 0.990.88 cells/s · 16 cells to go
0.25 s · throttle 1 · steer -1
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
<drive>
0.25 throttle 1 steer -1
0.75 throttle 1 steer 0
</drive>
1913.950.52, 2.001.55 cells/s · 14 cells to go
0.15 s · throttle 1 · steer +0.2
0.35 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
Heading is 84° and I want 90° straight down column 0, so I'm adding a small right correction and then driving straight. The route is down column 0 to row 5, right to column 1, up to row 2, across to column 4, up to row 1, then left along row 1 to the dock.

<drive>
0.15 throttle 1 steer 0.2
0.35 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
2014.950.57, 3.581.82 cells/s · 13 cells to go
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
</drive>
2115.450.60, 4.541.94 cells/s · 12 cells to go
0.15 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer -1
0.2 s · throttle 1 · steer 0
1 moved into range
Reply
<drive>
0.15 throttle 1 steer 0
0.6 throttle 1 steer -1
0.2 throttle 1 steer 0
</drive>
2216.301.17, 5.661.48 cells/s · 10 cells to go
0.5 s · throttle 1 · steer -1
0.1 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer -1
0.1 throttle 1 steer 0
</drive>
2316.901.95, 5.451.48 cells/s · 10 cells to go
0.4 s · throttle 0.8 · steer +1
0.1 s · throttle 0.8 · steer 0
Reply
<drive>
0.4 throttle 0.8 steer 1
0.1 throttle 0.8 steer 0
</drive>
2417.402.34, 5.001.18 cells/s · 8 cells to go
0.4 s · throttle 0.8 · steer -1
0.2 s · throttle 1 · steer 0
1 wall hit
Reply
Heading up the column x≈2.5 toward (2,3) and (2,2), I'm starting a left turn from -20° to about -90°, then straightening out.

<drive>
0.4 throttle 0.8 steer -1
0.2 throttle 1 steer 0
</drive>
2518.002.85, 4.590.86 cells/s · 8 cells to go
0.2 s · throttle 1 · steer -0.7
0.2 s · throttle 1 · steer +0.1
0.5 s · throttle 1 · steer 0
2 wall hits1 moved into range
Reply
<drive>
0.2 throttle 1 steer -0.7
0.2 throttle 1 steer 0.1
0.6 throttle 1 steer 0
</drive>
2618.902.85, 3.651.47 cells/s · 7 cells to go
0.25 s · throttle 1 · steer -0.4
0.2 s · throttle 1 · steer +0.15
Reply
Heading up the column toward row 2, I'm nudging left to pull x away from the right wall before the right turn.

<drive>
0.25 throttle 1 steer -0.4
0.2 throttle 1 steer 0.15
</drive>
2719.352.81, 2.991.48 cells/s · 6 cells to go
0.5 s · throttle 1 · steer +1
0.2 s · throttle 1 · steer 0
Reply
Next stretch: turn right out of the bottom of this cell and head toward cell (3,2), the next cell on the route to the dock.

<drive>
0.5 throttle 1 steer 1
0.2 throttle 1 steer 0
</drive>
2820.053.31, 2.231.48 cells/s · 5 cells to go
0.2 s · throttle 1 · steer +0.6
0.15 s · throttle 1 · steer 0
Reply
Heading is -16°, so the robot is drifting up toward the wall at y=2. I'll steer slightly right to level out, then run straight before turning up at cell (4,2).

<drive>
0.2 throttle 1 steer 0.6
0.15 throttle 1 steer 0
</drive>
2920.403.82, 2.161.48 cells/s · 5 cells to go
0.2 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer -1
Reply
<drive>
0.2 throttle 1 steer 0
0.5 throttle 1 steer -1
</drive>
3021.104.78, 1.931.48 cells/s · 3 cells to go
0.45 s · throttle 1 · steer -1
0.2 s · throttle 1 · steer -0.3
0.3 s · throttle 1 · steer 0
2 wall hits
Reply
Mid-turn toward the dock, with the wheel already at full left. I'll hold the turn briefly, then ease the steering off so the robot straightens out heading left along row 1 without clipping the top wall.

<drive>
0.45 throttle 1 steer -1
0.2 throttle 1 steer -0.3
0.3 throttle 1 steer 0
</drive>
3122.054.18, 1.150.87 cells/s · 3 cells to go
0.25 s · throttle 1 · steer -1
0.1 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
0.25 s · throttle 1 · steer 0
1 wall hit
Reply
I'm turning left to bring the heading from about -158° to just past 180°, so the robot stops pressing into the top wall. Then it drives straight left along row 1 to the dock.

<drive>
0.25 throttle 1 steer -1
0.1 throttle 1 steer 0
0.4 throttle 1 steer 0
0.25 throttle 1 steer 0
</drive>
3223.052.90, 1.281.70 cells/s · 1 cells to go
0.4 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
<drive>
0.4 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>