MICRO MOUSE BENCHMARK · DAILY MAZES

Claude Sonnet 5.5 on the daily maze of 2026-10-09

Reached the dock in 51.800 s against the median person's 27.575 s on the same maze, after 63 replies and 6 wall hits. The median of 30 people who raced it was 27.575 s (the middle half 27.11 to 29.633 s, the best 26.092 s); the game's bot takes 29.533 s. All of Claude Sonnet 5.5's runs.

RESULTReached the dock
TIME51.800 s
MEDIAN PERSON27.575 s
BOT29.533 s
SCORE53
WALL HITS6
REPLIES63
MODEL TIME17.1 min
COST$1.57 (API-equivalent)
TOKENS IN / OUT166,177 / 121,041
REQUESTS63
The maze and the path it droveSeen from above. The dashed line is the game's bot on the same maze. Each dot marks where a reply began.
Reply 1 at 0.000 sReply 2 at 0.500 sReply 3 at 1.150 sReply 4 at 2.150 sReply 5 at 3.150 sReply 6 at 4.150 sReply 7 at 4.600 sReply 8 at 5.450 sReply 9 at 6.450 sReply 10 at 7.450 sReply 11 at 8.450 sReply 12 at 8.950 sReply 13 at 9.950 sReply 14 at 10.950 sReply 15 at 11.950 sReply 16 at 12.850 sReply 17 at 13.650 sReply 18 at 14.650 sReply 19 at 15.450 sReply 20 at 15.950 sReply 21 at 16.950 sReply 22 at 17.950 sReply 23 at 18.750 sReply 24 at 19.300 sReply 25 at 20.250 sReply 26 at 21.150 sReply 27 at 22.150 sReply 28 at 23.150 sReply 29 at 23.950 sReply 30 at 24.700 sReply 31 at 25.450 sReply 32 at 25.950 sReply 33 at 26.950 sReply 34 at 27.950 sReply 35 at 28.750 sReply 36 at 29.750 sReply 37 at 30.550 sReply 38 at 31.300 sReply 39 at 32.300 sReply 40 at 32.900 sReply 41 at 33.700 sReply 42 at 34.700 sReply 43 at 35.700 sReply 44 at 36.600 sReply 45 at 37.600 sReply 46 at 38.600 sReply 47 at 39.400 sReply 48 at 40.400 sReply 49 at 41.250 sReply 50 at 41.600 sReply 51 at 42.450 sReply 52 at 43.200 sReply 53 at 44.100 sReply 54 at 44.900 sReply 55 at 45.600 sReply 56 at 46.150 sReply 57 at 46.450 sReply 58 at 47.250 sReply 59 at 48.250 sReply 60 at 48.950 sReply 61 at 49.500 sReply 62 at 50.050 sReply 63 at 50.850 s
Its pathThe bot's pathDock

Every reply

Where the robot was when the game paused, how far it still had to go, and the controls the model sent for the next stretch, with anything the game moved, cut or skipped. The run file carries an arcade-session/1 envelope. Its input tape, in the game's own format, replays this exact run at Micro Mouse commit 87bf0cb.

ReplyClock (s)Robot (x, y in cells)Controls sent
10.005.50, 6.500.00 cells/s · 57 cells to go
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
I'm starting with a straight run down toward the bottom row, then I'll turn left along it.

<drive>
0.7 throttle 1 steer 0
</drive>
20.505.50, 6.791.16 cells/s · 57 cells to go
0.15 s · throttle 1 · steer 0
0.5 s · throttle 0.6 · steer +1
Reply
Continuing down into row 7, then starting the right-hand turn to head left along the bottom row.

<drive>
0.15 throttle 1 steer 0
0.5 throttle 0.6 steer 1
</drive>
31.155.36, 7.470.88 cells/s · 56 cells to go
0.1 s · throttle 1 · steer +0.3
0.5 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
1 wall hit
Reply
<drive>
0.1 throttle 1 steer 0.3
0.5 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
42.154.01, 7.851.25 cells/s · 55 cells to go
0.15 s · throttle 1 · steer +0.4
0.35 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
2 wall hits
Reply
Heading down the bottom row to the left, then up column 0. I'll straighten the heading first.

<drive>
0.15 throttle 1 steer 0.4
0.35 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
53.152.63, 7.851.49 cells/s · 53 cells to go
0.2 s · throttle 1 · steer +0.5
0.2 s · throttle 1 · steer +0.2
0.2 s · throttle 1 · steer -0.3
0.4 s · throttle 0.8 · steer 0
1 wall hit
Reply
Steering slightly right to ease off the bottom wall, then straightening out along row 7 toward column 0.

<drive>
0.2 throttle 1 steer 0.5
0.2 throttle 1 steer 0.2
0.2 throttle 1 steer -0.3
0.4 throttle 0.8 steer 0
</drive>
64.151.28, 7.721.18 cells/s · 52 cells to go
0.15 s · throttle 0.3 · steer +0.6
0.3 s · throttle 0.4 · steer +1
Reply
Heading left along row 7 toward the corner at (0,7), then up column 0. I'll start the right turn now at reduced throttle.

<drive>
0.15 throttle 0.3 steer 0.6
0.3 throttle 0.4 steer 1
</drive>
74.600.97, 7.620.60 cells/s · 51 cells to go
0.25 s · throttle 0.6 · steer +0.5
0.3 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.25 throttle 0.6 steer 0.5
0.3 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
85.450.67, 6.631.65 cells/s · 50 cells to go
0.2 s · throttle 1 · steer +0.4
0.4 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 1 steer 0.4
0.4 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
96.450.56, 5.071.77 cells/s · 49 cells to go
0.5 s · throttle 1 · steer +0.05
0.5 s · throttle 1 · steer 0
Reply
Driving straight up column 0 toward row 0, where the route turns right.

<drive>
0.5 throttle 1 steer 0.05
0.5 throttle 1 steer 0
</drive>
107.450.60, 3.151.94 cells/s · 47 cells to go
0.5 s · throttle 1 · steer -0.05
0.5 s · throttle 1 · steer 0
Reply
Heading up column 0 toward row 0, with a small left correction to centre the robot in the corridor. The turn right along the top comes next reply.

<drive>
0.5 throttle 1 steer -0.05
0.5 throttle 1 steer 0
</drive>
118.450.58, 1.221.94 cells/s · 45 cells to go
0.1 s · throttle 0 · steer 0
0.4 s · throttle 0.6 · steer +1
Reply
Next I'll slow slightly, then turn right at the top into row 0 and head toward column 7.

<drive>
0.1 throttle 0 steer 0
0.4 throttle 0.6 steer 1
</drive>
128.950.64, 0.570.88 cells/s · 44 cells to go
0.5 s · throttle 0 · steer +1
0.5 s · throttle 0 · steer +1
Reply
I'm in the top-left cell heading up-right, but the route goes down column 0. I'll slow down and pivot right toward heading 90, then re-check.

<drive>
0.5 steer 1
0.5 steer 1
</drive>
139.950.75, 0.490.00 cells/s · 44 cells to go
0.1 s · throttle 0 · steer +1
0.5 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
Plan: head straight down column 0 to row 6, then go right, up column 1, and so on to the dock. First I'm straightening the heading to about 90°.

<drive>
0.1 throttle 0 steer 1
0.5 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
1410.950.69, 1.411.78 cells/s · 45 cells to go
0.2 s · throttle 1 · steer -0.2
0.1 s · throttle 1 · steer +0.2
0.4 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
Continuing down the left column. I'm nudging the heading back toward the column centre, since x is 0.69 against a 0.50 centre line, and then holding it straight.

<drive>
0.2 throttle 1 steer -0.2
0.1 throttle 1 steer 0.2
0.4 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
1511.950.72, 3.011.76 cells/s · 47 cells to go
0.4 s · brake · steer +1
0.5 s · throttle 0 · steer +1
Reply
I'm heading down column 0, which is the wrong way. The route to the dock goes up to row 0, so I'll brake and turn the robot around.

<drive>
0.4 brake steer 1
0.5 steer 1
</drive>
1612.850.68, 3.360.00 cells/s · 47 cells to go
0.5 s · throttle 0 · steer +1
0.3 s · throttle 1 · steer 0
1 moved into range
Reply
<drive>
0.7 throttle 0 steer 1
0.3 throttle 1 steer 0
</drive>
1713.650.65, 3.260.69 cells/s · 47 cells to go
0.1 s · throttle 1 · steer +1
0.5 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
<drive>
0.1 throttle 1 steer 1
0.5 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
1814.650.34, 1.831.83 cells/s · 45 cells to go
0.15 s · throttle 1 · steer +0.6
0.25 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer +1
Reply
<drive>
0.15 throttle 1 steer 0.6
0.25 throttle 1 steer 0
0.4 throttle 1 steer 1
</drive>
1915.450.42, 0.601.48 cells/s · 44 cells to go
0.2 s · throttle 1 · steer +1
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 1 steer 1
0.3 throttle 1 steer 0
</drive>
2015.951.11, 0.431.48 cells/s · 43 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
2116.952.84, 0.481.94 cells/s · 42 cells to go
0.1 s · throttle 1 · steer -0.2
0.4 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.1 throttle 1 steer -0.2
0.4 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
2217.954.73, 0.441.94 cells/s · 40 cells to go
0.5 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
2318.756.28, 0.411.94 cells/s · 38 cells to go
0.2 s · throttle 0 · steer 0
0.35 s · throttle 0.5 · steer +1
Reply
I'm easing off the throttle and starting the right turn at the end of the top corridor, so I can drop down column 7 without clipping the wall.

<drive>
0.2 throttle 0 steer 0
0.35 throttle 0.5 steer 1
</drive>
2419.306.96, 0.440.74 cells/s · 38 cells to go
0.35 s · throttle 0.6 · steer +1
0.3 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
1 wall hit
Reply
<drive>
0.35 throttle 0.6 steer 1
0.3 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
2520.257.15, 1.361.48 cells/s · 36 cells to go
0.15 s · throttle 1 · steer -0.4
0.15 s · throttle 1 · steer +0.3
0.3 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
1 wall hit
Reply
Heading is 94°, so the robot is drifting left toward the wall at x = 7.15. I'm steering left briefly to move it back toward the middle of column 7, then straightening and driving down.

<drive>
0.15 throttle 1 steer -0.4
0.15 throttle 1 steer 0.3
0.3 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
2621.157.24, 2.701.67 cells/s · 35 cells to go
0.1 s · throttle 1 · steer +0.15
0.4 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.1 throttle 1 steer 0.15
0.4 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
2722.157.31, 4.421.94 cells/s · 33 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
Continuing straight down column 7 for this stretch. The route to the dock goes down to row 7, left into (6,7), up column 6, then on through the maze. I'll set up the turn on the next reply.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
2823.157.38, 6.361.94 cells/s · 31 cells to go
0.25 s · throttle 1 · steer 0
0.25 s · brake · steer 0
0.3 s · throttle 0.4 · steer +1
Reply
Heading down at speed, I need to turn left into the bottom corridor. I'll slow down first, then start the right turn so the robot stays clear of the bottom wall.

<drive>
0.25 throttle 1 steer 0
0.25 brake
0.3 throttle 0.4 steer 1
</drive>
2923.957.39, 7.380.60 cells/s · 30 cells to go
0.3 s · throttle 0 · steer +1
0.25 s · throttle 0.6 · steer +1
0.2 s · throttle 0.8 · steer 0
Reply
The robot has overshot down into the bottom row, so I'm steering right through a pivot to head left along row 7. From there it turns up column 6.

<drive>
0.3 steer 1
0.25 throttle 0.6 steer 1
0.2 throttle 0.8 steer 0
</drive>
3024.707.13, 7.431.02 cells/s · 30 cells to go
0.2 s · throttle 0.7 · steer 0
0.35 s · throttle 0.6 · steer +1
0.2 s · throttle 0.8 · steer 0
Reply
Heading left along row 7 toward cell (6,7), then I'll turn up column 6.

<drive>
0.2 throttle 0.7 steer 0
0.35 throttle 0.6 steer 1
0.2 throttle 0.8 steer 0
</drive>
3125.456.51, 7.111.18 cells/s · 29 cells to go
0.25 s · throttle 0.8 · steer +1
0.25 s · throttle 0.8 · steer 0
Reply
<drive>
0.25 throttle 0.8 steer 1
0.25 throttle 0.8 steer 0
</drive>
3225.956.32, 6.561.18 cells/s · 28 cells to go
0.3 s · throttle 1 · steer +0.2
0.3 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
<drive>
0.3 throttle 1 steer 0.2
0.3 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
3326.956.45, 5.061.73 cells/s · 27 cells to go
0.2 s · throttle 1 · steer -0.2
0.4 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
Heading straight up column 6, with a small left correction to bring the heading back toward -90.

<drive>
0.2 throttle 1 steer -0.2
0.4 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
3427.956.47, 3.441.82 cells/s · 25 cells to go
0.5 s · throttle 1 · steer 0
0.3 s · throttle 0.7 · steer -1
1 moved into range
Reply
Continuing up column 6, then starting the left turn toward row 1.

<drive>
0.7 throttle 1 steer 0
0.3 throttle 0.7 steer -1
</drive>
3528.756.42, 2.021.19 cells/s · 24 cells to go
0.3 s · throttle 0.7 · steer -0.6
0.3 s · throttle 1 · steer -0.3
0.4 s · throttle 1 · steer 0
Reply
I'm turning left to head up into row 1, then running straight left along it.

<drive>
0.3 throttle 0.7 steer -0.6
0.3 throttle 1 steer -0.3
0.4 throttle 1 steer 0
</drive>
3629.755.26, 1.491.55 cells/s · 24 cells to go
0.15 s · throttle 0.5 · steer 0
0.45 s · throttle 0.6 · steer -1
0.2 s · throttle 0.8 · steer 0
Reply
Heading for the left turn at cell (4,1), then straight down column 4.

<drive>
0.15 throttle 0.5 steer 0
0.45 throttle 0.6 steer -1
0.2 throttle 0.8 steer 0
</drive>
3730.554.49, 1.601.18 cells/s · 23 cells to go
0.35 s · throttle 0.7 · steer -1
0.1 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.35 throttle 0.7 steer -1
0.1 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
3831.304.28, 2.451.49 cells/s · 22 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
3932.304.33, 4.221.94 cells/s · 20 cells to go
0.5 s · throttle 1 · steer 0
0.1 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.1 throttle 1 steer 0
</drive>
4032.904.36, 5.381.94 cells/s · 19 cells to go
0.3 s · throttle 1 · steer 0
0.5 s · throttle 0.6 · steer -1
Reply
<drive>
0.3 throttle 1 steer 0
0.5 throttle 0.6 steer -1
</drive>
4133.704.57, 6.570.88 cells/s · 18 cells to go
0.3 s · throttle 0 · steer -1
0.5 s · throttle 0 · steer -1
0.2 s · throttle 0.6 · steer -0.4
Reply
Heading is 29° and I need to go up (-90°). The robot is close to the right and bottom walls, so I'll coast to a stop while turning left, pivot, then start driving up.

<drive>
0.3 steer -1
0.5 steer -1
0.2 throttle 0.6 steer -0.4
</drive>
4234.704.70, 6.560.46 cells/s · 18 cells to go
0.3 s · throttle 1 · steer -0.2
0.3 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
<drive>
0.3 throttle 1 steer -0.2
0.3 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
4335.704.61, 5.251.73 cells/s · 19 cells to go
0.4 s · brake · steer 0
0.5 s · throttle 0 · steer +1
Reply
I overshot: the route to the dock goes back down through (4,6) and then left. I'll brake first, then pivot to turn around.

<drive>
0.4 brake 1
0.5 steer 1
</drive>
4436.604.57, 4.910.00 cells/s · 20 cells to go
0.5 s · throttle 0 · steer +1
0.5 s · throttle 0 · steer +1
Reply
Pivoting in place toward the down heading (90°), since the route to the dock starts by going down column 4.

<drive>
0.5 steer 1
0.5 steer 1
</drive>
4537.604.57, 4.910.00 cells/s · 20 cells to go
0.2 s · throttle 0 · steer +1
0.5 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
Heading is 67° and I need to face straight down (90°) to drop into cell (4,5). So I'll pivot right about 23°, then drive down.

<drive>
0.2 throttle 0 steer 1
0.5 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
4638.604.47, 5.651.73 cells/s · 19 cells to go
0.15 s · throttle 1 · steer 0
0.45 s · throttle 0.8 · steer +1
0.2 s · throttle 1 · steer 0
Reply
Heading down into cell (4,6), then I'll turn left along row 6 toward column 1.

<drive>
0.15 throttle 1 steer 0
0.45 throttle 0.8 steer 1
0.2 throttle 1 steer 0
</drive>
4739.403.94, 6.561.48 cells/s · 17 cells to go
0.15 s · throttle 1 · steer +0.6
0.35 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
Heading left along row 6 toward column 1, then up. First I'm straightening the heading from 162° to about 180°.

<drive>
0.15 throttle 1 steer 0.6
0.35 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
4840.402.40, 6.771.79 cells/s · 16 cells to go
0.15 s · throttle 0.4 · steer 0
0.5 s · throttle 0.6 · steer +1
0.2 s · throttle 1 · steer 0
Reply
Turning up into column 1 now. I'm easing off the throttle, then steering right into the corner.

<drive>
0.15 throttle 0.4 steer 0
0.5 throttle 0.6 steer 1
0.2 throttle 1 steer 0
</drive>
4941.251.56, 6.521.32 cells/s · 15 cells to go
0.2 s · throttle 1 · steer +0.8
0.15 s · throttle 1 · steer 0
Reply
Heading up the column x=1 toward (1,1), straightening the heading from -119 to about -90.

<drive>
0.2 throttle 1 steer 0.8
0.15 throttle 1 steer 0
</drive>
5041.601.39, 6.041.48 cells/s · 15 cells to go
0.2 s · throttle 1 · steer +0.5
0.15 s · throttle 1 · steer -0.4
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 1 steer 0.5
0.15 throttle 1 steer -0.4
0.5 throttle 1 steer 0
</drive>
5142.451.50, 4.771.65 cells/s · 13 cells to go
0.15 s · throttle 1 · steer -0.4
0.1 s · throttle 1 · steer +0.1
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
Heading is a few degrees off straight up, so I'm applying a small left correction, then going straight up column 1 toward the turn at row 1.

<drive>
0.15 throttle 1 steer -0.4
0.1 throttle 1 steer 0.1
0.7 throttle 1 steer 0
</drive>
5243.201.50, 3.621.64 cells/s · 12 cells to go
0.1 s · throttle 1 · steer +0.15
0.4 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
<drive>
0.1 throttle 1 steer 0.15
0.4 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
5344.101.51, 2.131.87 cells/s · 11 cells to go
0.5 s · throttle 0.4 · steer +1
0.3 s · throttle 1 · steer 0
1 moved into range
Reply
Heading is -89° at speed 1.87 and the route goes up into cell (1,1), then right. The top wall of (1,1) limits how far up I can go, so I'm starting the right turn now at reduced throttle.

<drive>
0.6 throttle 0.4 steer 1
0.3 throttle 1 steer 0
</drive>
5444.901.94, 1.441.30 cells/s · 10 cells to go
0.2 s · throttle 1 · steer +0.6
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 1 steer 0.6
0.5 throttle 1 steer 0
</drive>
5545.602.96, 1.291.59 cells/s · 9 cells to go
0.45 s · throttle 1 · steer +1
0.1 s · throttle 1 · steer 0
Reply
I'm starting the right turn into column 3 now, then straightening out. I'm keeping the reply short so I can check the state afterwards.

<drive>
0.45 throttle 1 steer 1
0.1 throttle 1 steer 0
</drive>
5646.153.68, 1.561.48 cells/s · 8 cells to go
0.2 s · throttle 0.8 · steer +1
0.1 s · throttle 0.8 · steer +0.3
Reply
<drive>
0.2 throttle 0.8 steer 1
0.1 throttle 0.8 steer 0.3
</drive>
5746.453.78, 1.911.18 cells/s · 8 cells to go
0.2 s · throttle 1 · steer -0.6
0.3 s · throttle 1 · steer -0.2
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 1 steer -0.6
0.3 throttle 1 steer -0.2
0.3 throttle 1 steer 0
</drive>
5847.253.65, 3.061.50 cells/s · 6 cells to go
0.15 s · throttle 1 · steer +0.5
0.3 s · throttle 1 · steer 0
0.15 s · throttle 1 · steer -0.5
0.4 s · throttle 1 · steer 0
Reply
<drive>
0.15 throttle 1 steer 0.5
0.3 throttle 1 steer 0
0.15 throttle 1 steer -0.5
0.4 throttle 1 steer 0
</drive>
5948.253.48, 4.521.53 cells/s · 5 cells to go
0.2 s · brake · steer 0
0.2 s · throttle 0.5 · steer 0
0.3 s · throttle 0.5 · steer +1
Reply
I'm slowing down first to set up the turn into the dead-end pocket at (3,5). The route is down to (3,5), left to (2,5), then up the column to the dock at (2,2).

<drive>
0.2 brake
0.2 throttle 0.5 steer 0
0.3 throttle 0.5 steer 1
</drive>
6048.953.43, 5.110.74 cells/s · 4 cells to go
0.35 s · throttle 0.6 · steer +1
0.2 s · throttle 0.6 · steer 0
Reply
<drive>
0.35 throttle 0.6 steer 1
0.2 throttle 0.6 steer 0
</drive>
6149.503.04, 5.320.88 cells/s · 4 cells to go
0.1 s · throttle 0.6 · steer 0
0.45 s · throttle 0.6 · steer +1
Reply
I'm driving left for a moment to line up with column 2, then turning right to head up toward the dock.

<drive>
0.1 throttle 0.6 steer 0
0.45 throttle 0.6 steer 1
</drive>
6250.052.58, 5.220.88 cells/s · 3 cells to go
0.2 s · throttle 0.7 · steer +1
0.3 s · throttle 0.8 · steer 0
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 0.7 steer 1
0.3 throttle 0.8 steer 0
0.3 throttle 1 steer 0
</drive>
6350.852.43, 4.281.50 cells/s · 2 cells to go
0.1 s · throttle 1 · steer +0.3
0.5 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
<drive>
0.1 throttle 1 steer 0.3
0.5 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>