Claude Haiku 5.5 on Fast Lane maze 2 (level 3-6)
Reached the dock in 24.275 s against the bot's 14.158 s on the same maze, after 39 replies and 6 wall hits. All of Claude Haiku 5.5's runs.
RESULTReached the dock
TIME24.275 s
BOT14.158 s
SCORE58
WALL HITS6
REPLIES39
MODEL TIME16.3 min
COST$0.111 (API-equivalent)
TOKENS IN / OUT98,930 / 200,116
REQUESTS39
Its pathThe bot's pathDockBoost pad
Every reply
Where the robot was when the game paused, how far it still had to go, and the controls the model sent for the next stretch, with anything the game moved, cut or skipped. The run file carries an arcade-session/1 envelope. Its input tape, in the game's own format, replays this exact run at Micro Mouse commit 87bf0cb.
| Reply | Clock (s) | Robot (x, y in cells) | Controls sent | |
|---|---|---|---|---|
| 1 | 0.00 | 4.50, 2.500.00 cells/s · 28 cells to go | 0.5 s · throttle 1 · steer 0 | ReplyI'll start by driving straight up the dead-end cell into the corridor at row 1, then check the state before turning left. <drive> 0.5 throttle 1 steer 0 </drive> |
| 2 | 0.50 | 4.50, 2.211.16 cells/s · 28 cells to go | 0.2 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer -1 1 moved into range | Reply<drive> 0.2 throttle 1 steer 0 0.65 throttle 1 steer -1 </drive> |
| 3 | 1.20 | 4.24, 1.241.48 cells/s · 27 cells to go | 0.15 s · throttle 1 · steer -1 0.4 s · throttle 1 · steer 0 | ReplyThe robot is turning up and left, toward the top wall. I'll finish turning it to face straight left, then drive west along row 1 toward cell (3,1). <drive> 0.15 throttle 1 steer -1 0.4 throttle 1 steer 0 </drive> |
| 4 | 1.75 | 3.45, 1.251.49 cells/s · 26 cells to go | 0.15 s · throttle 1 · steer +0.4 0.25 s · throttle 1 · steer 0 0.5 s · throttle 1 · steer 0 1 moved into range | Reply<drive> 0.15 throttle 1 steer 0.4 0.25 throttle 1 steer 0 0.6 throttle 1 steer 0 </drive> |
| 5 | 2.65 | 2.06, 1.321.74 cells/s · 25 cells to go | 0.15 s · brake · steer 0 0.25 s · throttle 0 · steer 0 0.3 s · throttle 0.2 · steer 0 | ReplyHeading 178 is roughly due left, and the robot is at speed 1.74. The route goes left into (0,1), up into (0,0), then east along row 0. The turn into (0,1) needs low speed, so I'm braking and coasting first. <drive> 0.15 brake 0.25 throttle 0 steer 0 0.3 throttle 0.2 steer 0 </drive> |
| 6 | 3.35 | 1.56, 1.330.30 cells/s · 24 cells to go | 0.5 s · throttle 0.3 · steer 0 0.4 s · throttle 0.3 · steer 0 | ReplyThe robot is in cell (1,1), which is open only left and right. The route to the dock goes left into (0,1), up to row 0, along row 0 to the right, and back around the outer loop. First I'll drive left and slow to a safe speed before turning up through the gap at the top of (0,1). <drive> 0.5 throttle 0.3 steer 0 0.4 throttle 0.3 steer 0 </drive> |
| 7 | 4.25 | 1.17, 1.340.44 cells/s · 24 cells to go | 0.3 s · throttle 0.3 · steer +1 0.4 s · throttle 0.3 · steer +1 | Reply<drive> 0.3 throttle 0.3 steer 1 0.4 throttle 0.3 steer 1 </drive> |
| 8 | 4.95 | 0.92, 1.210.44 cells/s · 23 cells to go | 0.3 s · throttle 0.6 · steer -1 1 wall hit | Reply<drive> 0.3 throttle 0.6 steer -1 </drive> |
| 9 | 5.25 | 0.88, 1.090.21 cells/s · 23 cells to go | 0.4 s · throttle 0.7 · steer +1 0.2 s · throttle 0.7 · steer 0 1 wall hit | Reply<drive> 0.4 throttle 0.7 steer 1 0.2 throttle 0.7 steer 0 </drive> |
| 10 | 5.85 | 0.91, 0.870.80 cells/s · 22 cells to go | 0.25 s · throttle 0.8 · steer +1 0.25 s · throttle 0.8 · steer +1 0.15 s · throttle 0.8 · steer +0.3 | Reply<drive> 0.25 throttle 0.8 steer 1 0.25 throttle 0.8 steer 1 0.15 throttle 0.8 steer 0.3 </drive> |
| 11 | 6.50 | 1.55, 0.641.18 cells/s · 21 cells to go | 0.3 s · throttle 0 · steer -1 0.2 s · throttle 0.7 · steer -0.3 | ReplyThe robot is at heading 25 degrees and turning clockwise, so it's heading toward the bottom wall (centre must stay at y ≤ 0.85). I'll cut throttle and steer hard left to straighten out, then ease back into forward motion. <drive> 0.3 throttle 0 steer -1 0.2 throttle 0.7 steer -0.3 </drive> |
| 12 | 7.00 | 1.88, 0.770.84 cells/s · 21 cells to go | 0.2 s · throttle 1 · steer -0.25 0.4 s · throttle 1 · steer 0 0.4 s · throttle 1 · steer 0 1 cut at the one-second limit | ReplyThe route runs east along the top corridor, then turns down at the right edge. I'm correcting the 4° heading first so the robot doesn't drift into the bottom wall. <drive> 0.2 throttle 1 steer -0.25 0.4 throttle 1 steer 0 0.5 throttle 1 steer 0 </drive> |
| 13 | 8.00 | 3.35, 0.681.78 cells/s · 19 cells to go | 0.5 s · throttle 1 · steer 0 0.2 s · throttle 1 · steer +0.7 0.3 s · throttle 1 · steer +1 | ReplyI'll drive straight for a moment, then turn right into the corridor at cell (5,0), which runs down toward the dock route. <drive> 0.5 throttle 1 steer 0 0.2 throttle 1 steer 0.7 0.3 throttle 1 steer 1 </drive> |
| 14 | 9.00 | 5.06, 0.821.48 cells/s · 17 cells to go | 0.25 s · throttle 1 · steer 0 0.15 s · throttle 1 · steer +1 0.1 s · throttle 1 · steer 0 0.3 s · throttle 1 · steer 0 1 wall hit | ReplyI'm turning the robot down into the corridor at column 5, keeping it away from the left wall at x=5. <drive> 0.25 throttle 1 steer 0 0.15 throttle 1 steer 1 0.1 throttle 1 steer 0 0.3 throttle 1 steer 0 </drive> |
| 15 | 9.80 | 5.38, 1.911.52 cells/s · 16 cells to go | 0.3 s · throttle 1 · steer +0.2 0.3 s · throttle 1 · steer 0 0.25 s · throttle 0.6 · steer +1 | ReplyI'm routing the robot down column 5, left through (4,3) and (4,4), across to (3,4), then up and round the top-left loop to the dock. This first stretch starts the descent and begins the turn toward the left opening of (5,3). <drive> 0.3 throttle 1 steer 0.2 0.3 throttle 1 steer 0 0.25 throttle 0.6 steer 1 </drive> |
| 16 | 10.65 | 5.38, 3.090.90 cells/s · 14 cells to go | 0.3 s · throttle 0.6 · steer +1 | ReplyThe robot is in cell (5,3), heading down-left at 112°. The route to the dock runs left through the gap at x=5, then down into (4,4), left along the bottom, and up the left column. The robot has to pass the gap at y 3.15 to 3.85 without hitting the wall at y=3 above cells (4,3) and (4,2), so I'll turn right toward heading 180 while keeping the robot moving down. <drive> 0.3 throttle 0.6 steer 1 </drive> |
| 17 | 10.95 | 5.22, 3.290.88 cells/s · 14 cells to go | 0.25 s · throttle 0.8 · steer 0 | ReplyThe robot is at (5,3) heading left-down, which matches the direction to the opening into (4,3). I'll ease off the right steer and keep moving toward (4,3). Then I'll turn left to head down through the gap into (4,4). <drive> 0.25 throttle 0.8 steer 0 </drive> |
| 18 | 11.20 | 4.95, 3.381.18 cells/s · 13 cells to go | 0.4 s · throttle 0.4 · steer -1 0.2 s · throttle 0.3 · steer -1 | Reply<drive> 0.4 throttle 0.4 steer -1 0.2 throttle 0.3 steer -1 </drive> |
| 19 | 11.80 | 4.63, 3.580.44 cells/s · 13 cells to go | 0.3 s · throttle 0.5 · steer 0 | Reply<drive> 0.3 throttle 0.5 steer 0 </drive> |
| 20 | 12.10 | 4.62, 3.780.74 cells/s · 13 cells to go | 0.3 s · throttle 0.6 · steer 0 0.45 s · throttle 0.6 · steer +1 0.15 s · throttle 0.6 · steer 0 | Reply<drive> 0.3 throttle 0.6 steer 0 0.45 throttle 0.6 steer 1 0.15 throttle 0.6 steer 0 </drive> |
| 21 | 13.00 | 4.41, 4.490.88 cells/s · 12 cells to go | 0.3 s · throttle 0.5 · steer +1 0.3 s · throttle 0.5 · steer +0.3 | Reply<drive> 0.3 throttle 0.5 steer 1 0.3 throttle 0.5 steer 0.3 </drive> |
| 22 | 13.60 | 3.98, 4.560.74 cells/s · 11 cells to go | 0.4 s · throttle 0.6 · steer +1 | ReplyThe robot is heading left toward the west wall of its cell, so it needs to turn right (steer +1) to head up toward (3,3) and then (3,2). <drive> 0.4 throttle 0.6 steer 1 </drive> |
| 23 | 14.00 | 3.71, 4.370.88 cells/s · 11 cells to go | 0.3 s · throttle 0.7 · steer +0.5 0.2 s · throttle 0.7 · steer 0 | Reply<drive> 0.3 throttle 0.7 steer 0.5 0.2 throttle 0.7 steer 0 </drive> |
| 24 | 14.50 | 3.66, 3.861.04 cells/s · 10 cells to go | 0.25 s · throttle 1 · steer -0.25 0.2 s · throttle 1 · steer -0.7 0.35 s · throttle 1 · steer -1 0.2 s · throttle 1 · steer -1 1 wall hit | Reply<drive> 0.25 throttle 1 steer -0.25 0.2 throttle 1 steer -0.7 0.35 throttle 1 steer -1 0.2 throttle 1 steer -1 </drive> |
| 25 | 15.50 | 3.05, 2.860.44 cells/s · 9 cells to go | 0.3 s · throttle 0.5 · steer +1 0.3 s · throttle 0.8 · steer 0 1 wall hit | ReplyThe robot is at the bottom edge of the opening into the row-2 corridor, heading left-down while sliding left-up. The route to the dock runs left along row 2, down column 0, then right and up column 1. I'll steer right to bring the heading toward 180 (left) before accelerating. <drive> 0.3 throttle 0.5 steer 1 0.3 throttle 0.8 steer 0 </drive> |
| 26 | 16.10 | 2.85, 2.930.81 cells/s · 8 cells to go | 0.25 s · throttle 0.4 · steer +1 0.25 s · throttle 0.6 · steer +0.3 | Reply<drive> 0.25 throttle 0.4 steer 1 0.25 throttle 0.6 steer 0.3 </drive> |
| 27 | 16.60 | 2.51, 3.040.88 cells/s · 9 cells to go | 0.2 s · brake · steer +1 0.45 s · throttle 0 · steer +1 | Reply<drive> 0.2 brake steer 1 0.45 throttle 0 steer 1 </drive> |
| 28 | 17.25 | 2.43, 3.030.00 cells/s · 9 cells to go | 0.4 s · throttle 0.6 · steer -1 0.2 s · throttle 0.7 · steer -0.6 | ReplyRobot is in (2,3), which opens up and down. The 9-cell route goes up into (2,2), left through (1,2) and (0,2), down the left column to (0,5), then right into (1,5) and up through (1,4) to the dock. First I need to swing the heading from -108 toward left, while moving up out of this cell. <drive> 0.4 throttle 0.6 steer -1 0.2 throttle 0.7 steer -0.6 </drive> |
| 29 | 17.85 | 2.35, 2.651.04 cells/s · 8 cells to go | 0.4 s · throttle 0.6 · steer -1 | Reply<drive> 0.4 throttle 0.6 steer -1 </drive> |
| 30 | 18.25 | 2.09, 2.430.88 cells/s · 8 cells to go | 0.15 s · throttle 1 · steer -0.2 0.5 s · throttle 1 · steer 0 0.15 s · throttle 0.6 · steer -0.6 1 moved into range | Reply<drive> 0.15 throttle 1 steer -0.2 0.7 throttle 1 steer 0 0.15 throttle 0.6 steer -0.6 </drive> |
| 31 | 19.05 | 1.00, 2.621.25 cells/s · 7 cells to go | 0.3 s · throttle 0.5 · steer -1 0.2 s · throttle 0.5 · steer -0.5 | ReplyTurning left toward the open cell (0,2) and then down the left column. <drive> 0.3 throttle 0.5 steer -1 0.2 throttle 0.5 steer -0.5 </drive> |
| 32 | 19.55 | 0.72, 2.900.74 cells/s · 6 cells to go | 0.15 s · throttle 0.5 · steer -0.3 0.2 s · throttle 0.6 · steer 0 0.5 s · throttle 0.8 · steer 0 1 moved into range | Reply<drive> 0.15 throttle 0.5 steer -0.3 0.2 throttle 0.6 steer 0 0.6 throttle 0.8 steer 0 </drive> |
| 33 | 20.40 | 0.67, 3.741.18 cells/s · 5 cells to go | 0.5 s · throttle 1 · steer 0 0.2 s · throttle 0.8 · steer -1 1 moved into range | Reply<drive> 0.8 throttle 1 steer 0 0.2 throttle 0.8 steer -1 </drive> |
| 34 | 21.10 | 0.63, 4.761.18 cells/s · 4 cells to go | 0.4 s · throttle 0.6 · steer 0 | ReplyI'm heading down the left corridor first, since the route goes down to (0,5), right to (1,5), then up to the dock. <drive> 0.4 throttle 0.6 steer 0 </drive> |
| 35 | 21.50 | 0.72, 5.110.88 cells/s · 3 cells to go | 0.3 s · throttle 0.6 · steer -1 0.4 s · throttle 0.6 · steer -1 0.3 s · throttle 0.6 · steer -1 | Reply<drive> 0.3 throttle 0.6 steer -1 0.4 throttle 0.6 steer -1 0.3 throttle 0.6 steer -1 </drive> |
| 36 | 22.50 | 1.36, 5.350.88 cells/s · 2 cells to go | 0.25 s · throttle 0.6 · steer -1 0.2 s · throttle 0.7 · steer -0.3 | Reply<drive> 0.25 throttle 0.6 steer -1 0.2 throttle 0.7 steer -0.3 </drive> |
| 37 | 22.95 | 1.39, 4.941.04 cells/s · 1 cells to go | 0.25 s · throttle 0.8 · steer +0.5 0.45 s · throttle 1 · steer 0 | Reply<drive> 0.25 throttle 0.8 steer 0.5 0.45 throttle 1 steer 0 </drive> |
| 38 | 23.65 | 1.16, 4.031.56 cells/s · 1 cells to go | 0.25 s · throttle 0.5 · steer +0.8 0.15 s · throttle 0.3 · steer +0.3 1 wall hit | Reply<drive> 0.25 throttle 0.5 steer 0.8 0.15 throttle 0.3 steer 0.3 </drive> |
| 39 | 24.05 | 1.16, 3.710.44 cells/s · 0 cells to go | 0.2 s · throttle 0.5 · steer +0.8 0.15 s · throttle 0.5 · steer +0.5 | ReplyThe dock centre is about 0.40 cells away, and the dock radius is 0.29, so I need to close the gap. The robot is heading -73° and the dock lies at about -32°, so I'll steer right while driving forward. The run ends as soon as the centre enters the dock. <drive> 0.2 throttle 0.5 steer 0.8 0.15 throttle 0.5 steer 0.5 </drive> |