MICRO MOUSE BENCHMARK · WORKBENCH

Claude Haiku 5.5 on Workbench maze 1 (level 1-9)

Reached the dock in 28.033 s against the bot's 16.267 s on the same maze, after 46 replies and 9 wall hits. All of Claude Haiku 5.5's runs.

RESULTReached the dock
TIME28.033 s
BOT16.267 s
SCORE58
WALL HITS9
REPLIES46
MODEL TIME17.0 min
COST$0.117 (API-equivalent)
TOKENS IN / OUT112,896 / 211,360
REQUESTS46
The maze and the path it droveSeen from above. The dashed line is the game's bot on the same maze. Each dot marks where a reply began.
Reply 1 at 0.000 sReply 2 at 0.900 sReply 3 at 1.900 sReply 4 at 2.300 sReply 5 at 3.050 sReply 6 at 3.450 sReply 7 at 4.150 sReply 8 at 4.500 sReply 9 at 5.300 sReply 10 at 5.800 sReply 11 at 6.800 sReply 12 at 7.400 sReply 13 at 8.200 sReply 14 at 8.850 sReply 15 at 9.250 sReply 16 at 9.750 sReply 17 at 10.700 sReply 18 at 11.700 sReply 19 at 12.700 sReply 20 at 13.100 sReply 21 at 13.600 sReply 22 at 14.000 sReply 23 at 14.300 sReply 24 at 14.700 sReply 25 at 15.400 sReply 26 at 16.000 sReply 27 at 16.300 sReply 28 at 16.900 sReply 29 at 17.400 sReply 30 at 18.100 sReply 31 at 18.700 sReply 32 at 19.150 sReply 33 at 19.550 sReply 34 at 19.950 sReply 35 at 20.650 sReply 36 at 21.550 sReply 37 at 22.300 sReply 38 at 22.900 sReply 39 at 23.900 sReply 40 at 24.200 sReply 41 at 24.567 sReply 42 at 25.467 sReply 43 at 26.267 sReply 44 at 26.767 sReply 45 at 27.267 sReply 46 at 27.767 s
Its pathThe bot's pathDock

Every reply

Where the robot was when the game paused, how far it still had to go, and the controls the model sent for the next stretch, with anything the game moved, cut or skipped. The run file carries an arcade-session/1 envelope. Its input tape, in the game's own format, replays this exact run at Micro Mouse commit 87bf0cb.

ReplyClock (s)Robot (x, y in cells)Controls sent
10.005.50, 2.500.00 cells/s · 31 cells to go
0.5 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
1 moved into range
Reply
I'm starting straight up the first corridor, since the route runs up to row 0 and then left along the top before the long loop back to the dock.

<drive>
0.6 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
20.905.50, 1.571.83 cells/s · 30 cells to go
0.3 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer -1
0.2 s · throttle 1 · steer 0
Reply
<drive>
0.3 throttle 1 steer 0
0.5 throttle 1 steer -1
0.2 throttle 1 steer 0
</drive>
31.904.96, 0.151.48 cells/s · 28 cells to go
0.2 s · throttle 1 · steer -1
0.2 s · throttle 1 · steer 0
1 wall hit
Reply
Heading -165° is pointing up into the top wall, so I'm turning left toward 180° to run west along row 0 and then down the left side.

<drive>
0.2 throttle 1 steer -1
0.2 throttle 1 steer 0
</drive>
42.304.41, 0.171.48 cells/s · 28 cells to go
0.25 s · throttle 1 · steer +0.2
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
The robot is at (4.41, 0.17) heading 174°, almost straight left and drifting slightly toward the south wall. The route to the dock runs left along row 0 to column 0, then down and around, so I'll straighten the heading to 180° and keep full throttle.

<drive>
0.25 throttle 1 steer 0.2
0.75 throttle 1 steer 0
</drive>
53.053.29, 0.161.61 cells/s · 27 cells to go
0.2 s · throttle 1 · steer -0.5
0.2 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 1 steer -0.5
0.2 throttle 1 steer 0
</drive>
63.452.69, 0.211.48 cells/s · 26 cells to go
0.2 s · throttle 1 · steer +0.4
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
The robot is in the top row at (2, 0), and the route to the dock runs left along row 0, then down column 0. I'll straighten the heading toward due left first, then drive on to the corner before turning down.

<drive>
0.2 throttle 1 steer 0.4
0.8 throttle 1 steer 0
</drive>
74.151.65, 0.261.60 cells/s · 25 cells to go
0.35 s · throttle 0 · steer 0
Reply
Coasting first to slow the robot before turning down into column 0.

<drive>
0.35 throttle 0 steer 0
</drive>
84.501.25, 0.260.68 cells/s · 25 cells to go
0.2 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer -1
0.2 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 1 steer 0
0.4 throttle 1 steer -1
0.2 throttle 1 steer 0
</drive>
95.300.35, 0.641.48 cells/s · 24 cells to go
0.25 s · throttle 1 · steer -1
0.25 s · throttle 1 · steer 0
Reply
The robot is heading 122° and drifting toward the left wall, so I'll steer left to bring it onto the downward corridor that leads toward the dock.

<drive>
0.25 throttle 1 steer -1
0.25 throttle 1 steer 0
</drive>
105.800.17, 1.331.48 cells/s · 23 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
116.800.20, 3.031.94 cells/s · 21 cells to go
0.5 s · throttle 1 · steer 0
0.1 s · throttle 1 · steer -1
1 moved into range
Reply
The robot is heading down the left column toward row 5. I'll drive straight for 0.9 s, then start a left turn to head east along the bottom row.

<drive>
0.9 throttle 1 steer 0
0.1 throttle 1 steer -1
</drive>
127.400.22, 4.191.84 cells/s · 20 cells to go
0.15 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer -1
0.15 s · throttle 1 · steer -1
Reply
<drive>
0.15 throttle 1 steer 0
0.5 throttle 1 steer -1
0.15 throttle 1 steer -1
</drive>
138.200.79, 5.181.48 cells/s · 19 cells to go
0.15 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
2 wall hits1 moved into range
Reply
<drive>
0.15 throttle 1 steer 0
0.85 throttle 1 steer 0
</drive>
148.851.56, 5.151.00 cells/s · 18 cells to go
0.2 s · throttle 1 · steer +1
0.2 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 1 steer 1
0.2 throttle 1 steer 0
</drive>
159.252.06, 5.161.48 cells/s · 17 cells to go
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
Heading is nearly straight along row 5, so I'll drive straight right toward the corner at column 5 before turning up.

<drive>
0.9 throttle 1 steer 0
</drive>
169.752.83, 5.201.68 cells/s · 17 cells to go
0.5 s · throttle 1 · steer 0
0.45 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.45 throttle 1 steer 0
</drive>
1710.704.61, 5.301.94 cells/s · 15 cells to go
0.2 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer +1
0.25 s · throttle 1 · steer +1
0.15 s · throttle 1 · steer 0
1 wall hit
Reply
<drive>
0.2 throttle 1 steer 0
0.4 throttle 1 steer 1
0.25 throttle 1 steer 1
0.15 throttle 1 steer 0
</drive>
1811.705.79, 5.850.02 cells/s · 14 cells to go
0.5 s · throttle 0 · steer +1
0.5 s · throttle 0 · steer +1
Reply
I'm in the bottom-right corner, facing down-left. The route to the dock starts by going up to cell (5, 4), so I need to turn to face up first. Turning right (clockwise) is about 170 degrees, which I'll do by pivoting in place with no throttle.

<drive>
0.5 steer 1
0.5 steer 1
</drive>
1912.705.79, 5.850.00 cells/s · 14 cells to go
0.4 s · throttle 0 · steer +1
Reply
<drive>
0.4 throttle 0 steer 1
</drive>
2013.105.79, 5.850.00 cells/s · 14 cells to go
0.5 s · throttle 0 · steer -1
Reply
The wheel is still at full right from the last reply, so I'll unwind it to full left and pivot to face up toward the gap above this cell.

<drive>
0.5 throttle 0 steer -1
</drive>
2113.605.79, 5.850.00 cells/s · 14 cells to go
0.3 s · throttle 0 · steer +1
0.1 s · throttle 0 · steer 0
Reply
I'm at (5.79, 5.85) facing up-left at -109°, and the route to the dock runs up through the gap at y=5. I'll pivot right to square up toward -90° before driving.

<drive>
0.3 throttle 0 steer 1
0.1 throttle 0 steer 0
</drive>
2214.005.79, 5.850.00 cells/s · 14 cells to go
0.2 s · throttle 0 · steer +1
0.1 s · throttle 0 · steer 0
Reply
Heading -123 points up-left, but the route leaves this cell upward, so I'll pivot clockwise toward straight up (-90) before driving. The robot is at x 5.79, close to the right wall, so it should drive straight up without hitting it.

<drive>
0.2 throttle 0 steer 1
0.1 throttle 0 steer 0
</drive>
2314.305.79, 5.850.00 cells/s · 14 cells to go
0.15 s · throttle 0 · steer +0.6
0.25 s · throttle 0.6 · steer 0
Reply
<drive>
0.15 throttle 0 steer 0.6
0.25 throttle 0.6 steer 0
</drive>
2414.705.78, 5.780.58 cells/s · 14 cells to go
0.3 s · throttle 1 · steer +0.25
0.4 s · throttle 1 · steer 0
Reply
<drive>
0.3 throttle 1 steer 0.25
0.4 throttle 1 steer 0
</drive>
2515.405.78, 4.911.55 cells/s · 13 cells to go
0.3 s · throttle 1 · steer -0.6
0.3 s · throttle 1 · steer -1
Reply
<drive>
0.3 throttle 1 steer -0.6
0.3 throttle 1 steer -1
</drive>
2616.005.47, 4.131.48 cells/s · 13 cells to go
0.3 s · throttle 1 · steer +1
1 wall hit
Reply
<drive>
0.3 throttle 1 steer 1
</drive>
2716.305.13, 4.080.16 cells/s · 13 cells to go
0.2 s · throttle 0.5 · steer -0.6
0.2 s · throttle 0.8 · steer -0.2
0.2 s · throttle 1 · steer 0
1 wall hit
Reply
<drive>
0.2 throttle 0.5 steer -0.6
0.2 throttle 0.8 steer -0.2
0.2 throttle 1 steer 0
</drive>
2816.905.05, 4.140.45 cells/s · 13 cells to go
0.5 s · throttle 0 · steer +1
1 moved into range
Reply
The robot is at (5.05, 4.14) facing left, and the route to the dock runs up through (5,3), then left along row 3. It needs to turn to face up first, so I'll pivot clockwise in place, about 100 degrees.

<drive>
0.8 throttle 0 steer 1
</drive>
2917.405.01, 4.150.00 cells/s · 13 cells to go
0.3 s · throttle 1 · steer +0.2
0.4 s · throttle 1 · steer 0
2 wall hits
Reply
<drive>
0.3 throttle 1 steer 0.2
0.4 throttle 1 steer 0
</drive>
3018.104.94, 4.150.11 cells/s · 12 cells to go
0.4 s · throttle 0 · steer -1
0.2 s · throttle 0.5 · steer 0
1 wall hit
Reply
<drive>
0.4 throttle 0 steer -1
0.2 throttle 0.5 steer 0
</drive>
3118.704.90, 4.150.40 cells/s · 12 cells to go
0.3 s · throttle 0.5 · steer -1
0.15 s · throttle 0.5 · steer +0.5
Reply
<drive>
0.3 throttle 0.5 steer -1
0.15 throttle 0.5 steer 0.5
</drive>
3219.154.60, 4.190.74 cells/s · 12 cells to go
0.2 s · throttle 0.6 · steer +1
0.2 s · throttle 0.6 · steer 0
Reply
The robot is heading left-down at 150° and needs to head straight left along the row 4 corridor, so I'll steer right to bring the heading toward 180°. Turning right also keeps it away from the top wall, which it is close to at y 4.19.

<drive>
0.2 throttle 0.6 steer 1
0.2 throttle 0.6 steer 0
</drive>
3319.554.30, 4.370.88 cells/s · 12 cells to go
0.15 s · throttle 0.7 · steer +1
0.25 s · throttle 0.8 · steer 0
Reply
<drive>
0.15 throttle 0.7 steer 1
0.25 throttle 0.8 steer 0
</drive>
3419.953.89, 4.521.18 cells/s · 11 cells to go
0.15 s · throttle 0.5 · steer +0.3
0.25 s · throttle 0.5 · steer 0
0.3 s · throttle 0.5 · steer 0
Reply
The robot is 0.4 s from the dock route's first corner. It needs to straighten from heading 163° to 180° and keep heading left toward (2,4), then turn up into the corridor at column 1.

<drive>
0.15 throttle 0.5 steer 0.3
0.25 throttle 0.5 steer 0
0.3 throttle 0.5 steer 0
</drive>
3520.653.35, 4.640.74 cells/s · 11 cells to go
0.3 s · throttle 0.6 · steer +0.3
0.3 s · throttle 0.6 · steer 0
0.3 s · throttle 0.5 · steer 0
Reply
I'm sending about 0.9 s of controls to straighten the heading to roughly 180 and continue west along row 4 toward cell (1, 4).

<drive>
0.3 throttle 0.6 steer 0.3
0.3 throttle 0.6 steer 0
0.3 throttle 0.5 steer 0
</drive>
3621.552.60, 4.660.74 cells/s · 10 cells to go
0.5 s · throttle 0.6 · steer 0
0.25 s · throttle 0.5 · steer +1
1 moved into range
Reply
<drive>
0.7 throttle 0.6 steer 0
0.25 throttle 0.5 steer 1
</drive>
3722.301.98, 4.630.74 cells/s · 9 cells to go
0.2 s · throttle 0.6 · steer +1
0.2 s · throttle 0.5 · steer +0.6
0.2 s · throttle 0.5 · steer +0.5
Reply
The robot is in cell (1,4), and the route to the dock goes up through (1,3), (1,2), (1,1), then right along row 1 to (4,1), down to (4,2), and left through (3,2) into the dock. The first move is to swing the nose up and left, aiming for the gap in the top wall of this cell.

<drive>
0.2 throttle 0.6 steer 1
0.2 throttle 0.5 steer 0.6
0.2 throttle 0.5 steer 0.5
</drive>
3822.901.71, 4.270.74 cells/s · 9 cells to go
0.2 s · throttle 1 · steer +0.2
0.4 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 1 steer 0.2
0.4 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
3923.901.73, 2.831.79 cells/s · 7 cells to go
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.3 throttle 1 steer 0
</drive>
4024.201.74, 2.271.94 cells/s · 7 cells to go
0.1167 s · throttle 1 · steer 0
0.25 s · throttle 1 · steer +1
Reply
I'm at (1.74, 2.27), heading up. The route is up through (1,1), right along row 1 to (4,1), down to (4,2), left to (3,2), and into the dock at (2,2). First I'll drive straight up a little further, then start the right turn into the gap at x=2, y≈1.5.

<drive>
0.12 throttle 1 steer 0
0.25 throttle 1 steer 1
</drive>
4124.571.80, 1.591.65 cells/s · 6 cells to go
0.3833 s · throttle 1 · steer +1
0.1167 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
The robot is heading up and right toward the top wall of cell (1,1). The route to the dock runs east along row 1 to column 4, south into cell (4,2), then west to the dock. This first stretch turns the robot east through the opening at x = 2 without clipping the top wall.

<drive>
0.38 throttle 1 steer 1
0.12 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
4225.472.98, 1.331.56 cells/s · 5 cells to go
0.5 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer +1
Reply
I'm holding straight for half a second to line up with the bend. The plan is a half-circle of radius 0.5 centred on the wall corner at (4, 2), which keeps the robot 0.5 cells from the corner. That brings it to (4, 2.5) heading left, straight into the dock.

<drive>
0.5 throttle 1 steer 0
0.3 throttle 1 steer 1
</drive>
4326.274.31, 1.601.52 cells/s · 3 cells to go
0.5 s · throttle 1 · steer +1
Reply
<drive>
0.5 throttle 1 steer 1
</drive>
4426.774.48, 2.261.48 cells/s · 2 cells to go
0.25 s · throttle 1 · steer +1
0.25 s · throttle 1 · steer 0
Reply
<drive>
0.25 throttle 1 steer 1
0.25 throttle 1 steer 0
</drive>
4527.273.84, 2.551.48 cells/s · 1 cells to go
0.5 s · throttle 1 · steer 0
Reply
Robot is in cell (3,2) heading almost straight left, and the dock is 1.34 cells away along the same row. Holding full throttle for 0.5 s covers about 0.74 cells, which brings the robot inside the dock radius (0.29 around x 2.50) without overshooting past it.

<drive>
0.5 throttle 1 steer 0
</drive>
4627.773.06, 2.601.70 cells/s · 1 cells to go
0.4 s · brake · steer 0
Reply
The robot is 0.56 cells from the dock centre and closing at 1.70 cells/s, so it will enter the 0.29 radius within about 0.2 s. Braking now should stop it inside the dock.

<drive>
0.4 brake
</drive>