MICRO MOUSE BENCHMARK · DAILY MAZES

Claude Haiku 5.5 on the daily maze of 2026-10-21

Reached the dock in 44.567 s against the median person's 24.025 s on the same maze, after 62 replies and 14 wall hits. The median of 20 people who raced it was 24.025 s (the middle half 23.68 to 25.233 s, the best 22.892 s); the game's bot takes 25.775 s. All of Claude Haiku 5.5's runs.

RESULTReached the dock
TIME44.567 s
MEDIAN PERSON24.025 s
BOT25.775 s
SCORE54
WALL HITS14
REPLIES62
MODEL TIME36.8 min
COST$0.250 (API-equivalent)
TOKENS IN / OUT168,597 / 460,591
REQUESTS62
The maze and the path it droveSeen from above. The dashed line is the game's bot on the same maze. Each dot marks where a reply began.
Reply 1 at 0.000 sReply 2 at 1.000 sReply 3 at 1.950 sReply 4 at 2.650 sReply 5 at 3.350 sReply 6 at 4.250 sReply 7 at 4.850 sReply 8 at 5.850 sReply 9 at 6.550 sReply 10 at 7.550 sReply 11 at 7.950 sReply 12 at 8.350 sReply 13 at 8.550 sReply 14 at 9.550 sReply 15 at 10.050 sReply 16 at 11.050 sReply 17 at 11.950 sReply 18 at 12.850 sReply 19 at 13.750 sReply 20 at 14.550 sReply 21 at 15.250 sReply 22 at 16.150 sReply 23 at 17.050 sReply 24 at 17.600 sReply 25 at 18.100 sReply 26 at 18.700 sReply 27 at 19.200 sReply 28 at 19.600 sReply 29 at 20.050 sReply 30 at 20.600 sReply 31 at 21.400 sReply 32 at 22.300 sReply 33 at 23.150 sReply 34 at 23.900 sReply 35 at 24.700 sReply 36 at 25.600 sReply 37 at 26.550 sReply 38 at 26.800 sReply 39 at 27.200 sReply 40 at 27.950 sReply 41 at 28.950 sReply 42 at 29.950 sReply 43 at 30.400 sReply 44 at 31.000 sReply 45 at 31.600 sReply 46 at 32.300 sReply 47 at 33.300 sReply 48 at 33.800 sReply 49 at 34.800 sReply 50 at 35.800 sReply 51 at 36.550 sReply 52 at 37.150 sReply 53 at 38.050 sReply 54 at 38.650 sReply 55 at 39.450 sReply 56 at 40.300 sReply 57 at 41.000 sReply 58 at 41.300 sReply 59 at 41.800 sReply 60 at 42.800 sReply 61 at 43.600 sReply 62 at 44.100 s
Its pathThe bot's pathDockBoost pad

Every reply

Where the robot was when the game paused, how far it still had to go, and the controls the model sent for the next stretch, with anything the game moved, cut or skipped. The run file carries an arcade-session/1 envelope. Its input tape, in the game's own format, replays this exact run at Micro Mouse commit 87bf0cb.

ReplyClock (s)Robot (x, y in cells)Controls sent
10.001.50, 0.500.00 cells/s · 50 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
The robot starts in a dead-end corridor along the top row, so the route runs right to the corner at (7,0), down column 7, then west along row 7 and back up through the maze to the dock. This first reply is a straight run east.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
21.002.61, 0.501.89 cells/s · 49 cells to go
0.45 s · brake · steer 0
0.5 s · throttle 0 · steer +1
Reply
I'm braking to a stop first, then pivoting left to face the corridor I need. The route goes left along row 0, down the left side, across row 1, and back through row 2 to the dock from below.

<drive>
0.45 brake
0.5 steer 1
</drive>
31.953.02, 0.500.00 cells/s · 48 cells to go
0.3 s · throttle 0.6 · steer -1
0.4 s · throttle 1 · steer -0.5
1 wall hit
Reply
I'm heading right along the top corridor toward column 7, since the route to the dock is long either way. The robot starts stopped and facing down-right, so I'll turn toward 0 degrees while building throttle.

<drive>
0.3 throttle 0.6 steer -1
0.4 throttle 1 steer -0.5
</drive>
42.653.38, 0.850.73 cells/s · 48 cells to go
0.25 s · throttle 1 · steer -1
0.15 s · throttle 1 · steer -0.3
0.3 s · throttle 1 · steer 0
Reply
I'm turning left to bring the heading from 30° to 0°, so the robot doesn't hit the bottom wall at y=1, then driving straight along row 0 toward the right side.

<drive>
0.25 throttle 1 steer -1
0.15 throttle 1 steer -0.3
0.3 throttle 1 steer 0
</drive>
53.354.14, 0.691.48 cells/s · 47 cells to go
0.4 s · throttle 1 · steer +0.5
0.2 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
The robot is in the top row heading up-right, and the only route to the dock runs right along the top row, down the right column, back left along the bottom, and around the left side. The first step is to straighten out heading east, so I'm steering right briefly and then holding straight.

<drive>
0.4 throttle 1 steer 0.5
0.2 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
64.255.45, 0.741.59 cells/s · 46 cells to go
0.2 s · throttle 1 · steer -0.5
0.1 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
Heading is 12° and the robot is drifting toward the bottom wall of this corridor, so I'll straighten it first. The route is east along row 0 to column 7, then down the open column.

<drive>
0.2 throttle 1 steer -0.5
0.1 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
74.856.34, 0.771.53 cells/s · 45 cells to go
0.3 s · throttle 1 · steer 0
0.25 s · throttle 1 · steer +1
0.35 s · throttle 1 · steer +1
0.1 s · throttle 1 · steer 0
Reply
I'm heading for the dock by way of the boost pads at (3,2) and (4,2). The route starts by turning down column 7, so first I'll drive to x≈6.8 and then turn right.

<drive>
0.3 throttle 1 steer 0
0.25 throttle 1 steer 1
0.35 throttle 1 steer 1
0.1 throttle 1 steer 0
</drive>
85.857.61, 1.251.48 cells/s · 43 cells to go
0.2 s · throttle 1 · steer +0.2
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
The robot is in column 7, moving down at top speed with a slight rightward drift. The route to the dock runs down column 7 to the bottom row, then left, so I'll hold the descent and trim the heading toward straight down.

<drive>
0.2 throttle 1 steer 0.2
0.8 throttle 1 steer 0
</drive>
96.557.53, 2.301.61 cells/s · 42 cells to go
0.4 s · brake · steer 0
0.5 s · throttle 0 · steer +1
0.1 s · throttle 0 · steer +1
Reply
The robot is heading down column 7 at 1.61 cells/s, and the route to the dock runs back up through row 0, so it has to reverse direction. I'll brake to a stop first, then pivot clockwise on the spot.

<drive>
0.4 brake steer 0
0.5 steer 1
0.1 steer 1
</drive>
107.557.50, 2.600.00 cells/s · 42 cells to go
0.4 s · throttle 0 · steer -1
Reply
Heading is 152 degrees and the wheel is at full right, so I'll pivot left toward the downward heading (90) before driving down column 7. Pivoting in place keeps the robot centred in its cell.

<drive>
0.4 steer -1
</drive>
117.957.50, 2.600.00 cells/s · 42 cells to go
0.4 s · throttle 0 · steer -1
Reply
The robot is at (7.50, 2.60) facing 152°, and the route south down column 7 is the way toward the dock. I need to turn it to face about 90° (straight down) first, so I'm pivoting left on the spot.

<drive>
0.4 throttle 0 steer -1
</drive>
128.357.50, 2.600.00 cells/s · 42 cells to go
0.2 s · throttle 0 · steer -1
Reply
I'm at (7.5, 2.6) heading 116° with the wheel still at full left, so I'll pivot left to bring the heading down toward 90° (straight down the column) before driving.

<drive>
0.2 steer -1
</drive>
138.557.50, 2.600.00 cells/s · 42 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
The robot is stopped in a vertical corridor at column 7, heading roughly straight down. The corridor runs down to row 7, where the route turns left. I'm driving straight down at full throttle with the wheel centred.

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
149.557.61, 3.691.84 cells/s · 41 cells to go
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
I'm heading down column 7 with the dock far to the west, so I'll hold straight for a second before starting the turn at the bottom.

<drive>
1.0 throttle 1 steer 0
</drive>
1510.057.71, 4.651.94 cells/s · 40 cells to go
0.3 s · throttle 1 · steer +0.2
0.3 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
<drive>
0.3 throttle 1 steer 0.2
0.3 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
1611.057.65, 6.331.83 cells/s · 38 cells to go
0.25 s · throttle 1 · steer 0
0.45 s · throttle 1 · steer +1
0.2 s · throttle 1 · steer 0
Reply
Reaching the dock means going down to the bottom corridor, west along row 7, up at column 2, then around the left side and back into the centre. The robot is heading down toward the bottom wall, so I'll straighten up briefly and then turn left (west) into the row 7 corridor.

<drive>
0.25 throttle 1 steer 0
0.45 throttle 1 steer 1
0.2 throttle 1 steer 0
</drive>
1711.957.09, 7.611.48 cells/s · 37 cells to go
0.15 s · throttle 1 · steer +1
0.25 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
<drive>
0.15 throttle 1 steer 1
0.25 throttle 1 steer 0
0.55 throttle 1 steer 0
</drive>
1812.855.73, 7.841.73 cells/s · 35 cells to go
0.4 s · brake · steer +1
0.5 s · throttle 0 · steer +1
1 wall hit
Reply
I'm at the bottom of a dead-end corridor, and the only exit is to the right, so I need to brake and turn around. I'll brake to a stop while starting a clockwise turn, then keep pivoting.

<drive>
0.4 brake steer 1
0.5 steer 1
</drive>
1913.755.46, 7.840.00 cells/s · 35 cells to go
0.5 s · throttle 0 · steer -1
0.3 s · throttle 0 · steer -1
Reply
Heading is -92 (up) and the corridor runs left, so the robot needs to pivot left about 90 degrees before driving. The wheel is at full right and has to sweep past centre first, so I'll pivot in two short segments and check the heading before driving.

<drive>
0.5 steer -1
0.3 steer -1
</drive>
2014.555.46, 7.840.00 cells/s · 35 cells to go
0.45 s · throttle 0 · steer -1
0.25 s · throttle 0.5 · steer 0
1 wall hit
Reply
The robot is pivoting left from heading -128, and I need it facing about 180 (straight left) before driving. The route runs left along row 7, then up column 0, across row 1, and down into the dock corridor, so I'll pivot first and then start moving.

<drive>
0.45 throttle 0 steer -1
0.25 throttle 0.5 steer 0
</drive>
2115.255.39, 7.850.47 cells/s · 35 cells to go
0.2 s · throttle 0.6 · steer +1
0.3 s · throttle 0.9 · steer 0
0.4 s · throttle 1 · steer 0
Reply
Heading 171 is pointing slightly down, toward the bottom wall, so I'll straighten to 180 first. Then I'll drive left along the bottom corridor toward column 2, where the route turns up.

<drive>
0.2 throttle 0.6 steer 1
0.3 throttle 0.9 steer 0
0.4 throttle 1 steer 0
</drive>
2216.154.29, 7.701.68 cells/s · 34 cells to go
0.5 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer +1
1 moved into range
Reply
I'm on the bottom row, heading left, and the route to the dock goes up through the opening at column 2. I'll hold straight for a bit to line up, then start turning right into that opening.

<drive>
0.6 throttle 1 steer 0
0.4 throttle 1 steer 1
</drive>
2317.052.77, 7.291.48 cells/s · 32 cells to go
0.3 s · throttle 1 · steer 0
0.25 s · throttle 1 · steer -1
Reply
The route runs up through the gap into cell (2,6), then left along row 6. I'll drift up-left out of the start cell first, then steer left toward the gap in the wall at x = 2.

<drive>
0.3 throttle 1 steer 0
0.25 throttle 1 steer -1
</drive>
2417.602.41, 6.561.48 cells/s · 31 cells to go
0.3 s · throttle 1 · steer -1
0.2 s · throttle 1 · steer 0
Reply
I'm sending the first half of the route: turn left out of the current up-left heading, then roll straight left through the opening into cell (1, 6). I'll re-check position after this stretch before planning the turn up.

<drive>
0.3 throttle 1 steer -1
0.2 throttle 1 steer 0
</drive>
2518.101.73, 6.431.48 cells/s · 30 cells to go
0.2 s · throttle 1 · steer +0.5
0.4 s · throttle 1 · steer 0
Reply
The robot needs to go left out of cell (1,6) into (0,6), then up column 0. For now I'll straighten its heading to due left and run it toward x ≈ 0.9 before turning.

<drive>
0.2 throttle 1 steer 0.5
0.4 throttle 1 steer 0
</drive>
2618.700.85, 6.511.53 cells/s · 29 cells to go
0.5 s · throttle 1 · steer +1
Reply
The robot is heading left at 1.53 cells/s toward the outer wall at x=0.15, about 0.46 s away. It needs to turn up the open column 0, so I'll steer right (+1) with throttle held, then reassess once the heading nears -90.

<drive>
0.5 throttle 1 steer 1
</drive>
2719.200.19, 6.261.48 cells/s · 29 cells to go
0.2 s · throttle 0 · reverse 1 · steer +1
0.2 s · throttle 0 · reverse 0.5 · steer +0.5
1 wall hit
Reply
The robot is at x 0.19, close to the left wall (it must stay at x ≥ 0.15), and heading up-left at -117°. I need to slow it and turn right toward the column above, so I'll reverse with full right steer to stop the leftward drift. I'll check the state after this.

<drive>
0.2 reverse 1 steer 1
0.2 reverse 0.5 steer 0.5
</drive>
2819.600.15, 6.120.19 cells/s · 29 cells to go
0.25 s · throttle 0.6 · steer -1
0.2 s · throttle 0.8 · steer 0
Reply
I'm at the left wall, heading up-right and sliding down, so I'll turn left to face up, then drive up column 0 toward row 1. The route to the dock runs up this column, across row 1, then back down through column 1.

<drive>
0.25 throttle 0.6 steer -1
0.2 throttle 0.8 steer 0
</drive>
2920.050.20, 5.970.87 cells/s · 28 cells to go
0.3 s · throttle 1 · steer -0.5
0.25 s · throttle 1 · steer 0
Reply
I'm heading up column 0 toward row 1, where I'll turn right toward the dock. The first move corrects the heading from -75 to straight up while holding throttle.

<drive>
0.3 throttle 1 steer -0.5
0.25 throttle 1 steer 0
</drive>
3020.600.21, 5.241.48 cells/s · 28 cells to go
0.3 s · throttle 1 · steer +0.15
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
Route: up column 0 to row 1, right along row 1 to column 6, down column 6 and left through row 4 and row 5, then up through the boost pads at (4,2) and (3,2) to row 2, down column 1 to row 5, and up into the dock. The robot is drifting left at -97°, so I'll correct the heading slightly while driving up.

<drive>
0.3 throttle 1 steer 0.15
0.6 throttle 1 steer 0
</drive>
3121.400.18, 4.041.62 cells/s · 27 cells to go
0.5 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
The robot is in the left column, and the route to the dock runs up to row 1, right along row 1, then back down and around through the boost pad at (3,2). I'll drive straight up for now, and start turning right once it reaches about y 2.

<drive>
0.5 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
3222.300.19, 2.391.94 cells/s · 25 cells to go
0.15 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer +1
0.2 s · throttle 1 · steer 0
1 moved into range
Reply
<drive>
0.15 throttle 1 steer 0
0.55 throttle 1 steer 1
0.2 throttle 1 steer 0
</drive>
3323.150.73, 1.251.48 cells/s · 24 cells to go
0.15 s · throttle 1 · steer +1
0.1 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
The robot is at (0.73, 1.25) heading -15°, which is slightly up toward the top wall of row 1. I'll steer right briefly to bring the heading back to about 0° and then drive straight along row 1.

<drive>
0.15 throttle 1 steer 1
0.1 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
3423.901.86, 1.151.64 cells/s · 23 cells to go
0.1 s · throttle 1 · steer +0.3
0.2 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
1 wall hit
Reply
The robot is heading slightly upward (-3°) and sits at y 1.15, just 0.15 from the top wall at y 1, so it needs to level out before it drifts into the wall. I'll apply a short right steer to correct the heading, then drive straight along the row-1 corridor.

<drive>
0.1 throttle 1 steer 0.3
0.2 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
3524.703.06, 1.181.64 cells/s · 21 cells to go
0.5 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
I'm heading right along row 1, which is the only way out of this cell. The route to the dock is right to column 6, down to row 2, then through the boost-pad corridor and down column 1 to the dock. I'll drive straight for now and set up the turn next.

<drive>
0.5 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
3625.604.73, 1.221.94 cells/s · 20 cells to go
0.45 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer +1
1 moved into range
Reply
The corridor runs right to cell (6,1), then down through (6,2) and (5,2). The robot is at x 4.73 with the wall at x 5, so I'll drive straight for a moment, then start a right turn to reach column 6 heading down.

<drive>
0.45 throttle 1 steer 0
0.55 throttle 1 steer 1
</drive>
3726.556.34, 1.531.48 cells/s · 18 cells to go
0.05 s · throttle 1 · steer +1
0.2 s · throttle 1 · steer 0
Reply
The robot needs to drop into cell (6,2), swing left into (5,2), then head down the column toward (5,5). This reply just straightens the heading from 65° to roughly 90° so it can enter the (6,2) opening.

<drive>
0.05 throttle 1 steer 1
0.2 throttle 1 steer 0
</drive>
3826.806.42, 1.881.48 cells/s · 18 cells to go
0.4 s · throttle 1 · steer +1
Reply
The robot is at (6.42, 1.88) heading down. The route to the dock runs down into cell (6,2), then left into (5,2), then down through column 5. I'll turn right (steer +1) to swing the heading toward the west, keeping throttle on so the speed holds.

<drive>
0.4 throttle 1 steer 1
</drive>
3927.206.33, 2.451.48 cells/s · 17 cells to go
0.35 s · brake · steer +1
0.4 s · throttle 0 · steer +1
Reply
I'm braking first so I can turn on the spot and then enter the corridor heading west and then south. The route runs (6,2) → (5,2) → (5,3) → (5,4) → (5,5) → (4,5) → (4,4) → (4,3) → (4,2) → (3,2) → (2,2) → (1,2) → (1,3) → (1,4) → (1,5) → (2,5) → (2,4) → dock.

<drive>
0.35 brake steer 1
0.4 steer 1
</drive>
4027.956.14, 2.580.00 cells/s · 17 cells to go
0.4 s · throttle 0 · steer -1
0.2 s · throttle 0.6 · steer -0.3
0.4 s · throttle 1 · steer 0
Reply
Heading is -131° (about 229°), so the robot needs to turn left about 50° to face west into cell (5,2). It is stationary and the wheel is still at full right, so I'll pivot left first, then start driving.

<drive>
0.4 steer -1
0.2 throttle 0.6 steer -0.3
0.4 throttle 1 steer 0
</drive>
4128.955.86, 2.271.39 cells/s · 16 cells to go
0.35 s · brake · steer -1
0.5 s · throttle 0 · steer -1
0.15 s · throttle 0 · steer -1
1 wall hit
Reply
I'm braking hard and pivoting left so the robot stops heading toward the top wall and turns to face down.

<drive>
0.35 brake steer -1
0.5 throttle 0 steer -1
0.15 throttle 0 steer -1
</drive>
4229.955.73, 2.150.00 cells/s · 16 cells to go
0.25 s · throttle 1 · steer -1
0.2 s · throttle 1 · steer -0.5
Reply
The robot is in cell (5,2) with no speed, and the route to the dock runs down column 5, through row 5 to column 4, up to the boost pads at (4,2) and (3,2), then along row 2 to column 1, down to row 5, and up column 2 into the dock. Its heading of 123° points too far toward the left wall, so I'll turn left toward straight down while starting to move.

<drive>
0.25 throttle 1 steer -1
0.2 throttle 1 steer -0.5
</drive>
4330.405.74, 2.381.02 cells/s · 16 cells to go
0.15 s · throttle 1 · steer +0.5
0.15 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
1 wall hit
Reply
The robot is heading mostly down, but it sits right of the corridor centre (x 5.5). I'll steer right to straighten it down column 5, then check the state before the turn at the bottom.

<drive>
0.15 throttle 1 steer 0.5
0.15 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
4431.005.92, 2.880.02 cells/s · 16 cells to go
0.3 s · throttle 1 · steer +1
0.3 s · throttle 0.6 · steer 0
2 wall hits
Reply
<drive>
0.3 throttle 1 steer 1
0.3 throttle 0.6 steer 0
</drive>
4531.605.88, 2.920.21 cells/s · 16 cells to go
0.2 s · throttle 0.6 · steer +0.5
0.2 s · throttle 0.7 · steer -0.3
0.3 s · throttle 1 · steer -0.2
Reply
I'm working from the open-sides list: from (5,2) the route runs down column 5 to (5,5), left to (4,5), up column 4 through the boost pads at (4,2) and (3,2), left along row 2 to (1,2), down column 1 to (1,5), right to (2,5), then up into the dock. The robot is near the right edge of the column 5 corridor (x 5.88), so I'll steer gently left-down to recentre before going straight down.

<drive>
0.2 throttle 0.6 steer 0.5
0.2 throttle 0.7 steer -0.3
0.3 throttle 1 steer -0.2
</drive>
4632.305.69, 3.531.48 cells/s · 15 cells to go
0.5 s · throttle 1 · steer 0
0.25 s · throttle 1 · steer +1
0.25 s · throttle 1 · steer +1
1 moved into range1 cut at the one-second limit
Reply
The robot is heading south in cell (5,3). The route to the dock is 15 cells: down to (5,5), left into (4,5), up through (4,4) to (4,2), left along row 2 to (1,2), down column 1 to (1,5), right to (2,5), then up into the dock. The first move is to drive straight down, then steer right to turn west into the row-5 corridor.

<drive>
0.8 throttle 1 steer 0
0.25 throttle 1 steer 1
0.3 throttle 1 steer 1
</drive>
4733.305.22, 4.901.48 cells/s · 14 cells to go
0.25 s · brake · steer -1
0.25 s · throttle 0.4 · steer -1
2 wall hits
Reply
I'm braking and turning left now. The robot is 0.07 cells from the left wall of its cell, so it needs to slow down and head down toward the opening below.

<drive>
0.25 brake steer -1
0.25 throttle 0.4 steer -1
</drive>
4833.805.15, 4.920.02 cells/s · 14 cells to go
0.5 s · throttle 0 · steer -1
0.5 s · throttle 1 · steer 0
1 wall hit1 moved into range1 cut at the one-second limit
Reply
The route to the dock runs down into (5,5), left through (4,5) and (4,4), up to (4,2), left across the boost pad at (3,2), then around through (1,2)-(1,5) and up into the dock. The robot is nearly stopped and has to rotate from heading 164 to about 90. A pivot of about 0.65 s at full left steer does that, and staying just under 90 keeps it clear of the left wall. Then it drives down at about 1.15 cells/s and brakes so it stops near y 5.4, ready to turn left.

<drive>
0.65 steer -1
0.5 throttle 1 steer 0
0.27 brake
</drive>
4934.805.13, 5.201.11 cells/s · 13 cells to go
0.3 s · brake · steer 0
0.5 s · throttle 0 · steer +1
0.2 s · throttle 0 · steer +1
Reply
Braking first, then pivoting right to face left so I can get back to the left-hand corridor.

<drive>
0.3 brake
0.5 steer 1
0.2 steer 1
</drive>
5035.805.11, 5.340.00 cells/s · 13 cells to go
0.2 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
0.25 s · throttle 1 · steer +1
Reply
<drive>
0.2 throttle 1 steer 0
0.3 throttle 1 steer 0
0.25 throttle 1 steer 1
</drive>
5136.554.47, 5.381.48 cells/s · 12 cells to go
0.25 s · brake · steer +1
0.35 s · throttle 0 · steer +1
Reply
I'm braking hard and pivoting right, since the wall to the left is only about 0.3 cells away and the route goes up through the opening into (4,4).

<drive>
0.25 brake steer 1
0.35 steer 1
</drive>
5237.154.26, 5.260.00 cells/s · 12 cells to go
0.5 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
1 moved into range
Reply
The robot is stopped in the open corridor at (4,5). The route runs up column 4 to (4,2), left through the boost pad at (3,2)/(4,2), then around to the dock. This first stretch accelerates straight up the corridor.

<drive>
0.6 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
5338.054.46, 4.361.78 cells/s · 11 cells to go
0.5 s · throttle 1 · steer 0
0.1 s · throttle 1 · steer 0
Reply
The robot needs to reach the boost pad at (3,2) heading left, so I'm driving straight up a little longer before starting a left turn.

<drive>
0.5 throttle 1 steer 0
0.1 throttle 1 steer 0
</drive>
5438.654.70, 3.251.94 cells/s · 10 cells to go
0.25 s · throttle 1 · steer -1
0.35 s · throttle 1 · steer -1
0.2 s · throttle 1 · steer 0
Reply
<drive>
0.25 throttle 1 steer -1
0.35 throttle 1 steer -1
0.2 throttle 1 steer 0
</drive>
5539.454.01, 2.222.31 cells/s · 9 cells to go
0.15 s · throttle 1 · steer -1
0.5 s · throttle 1 · steer 0
0.2 s · throttle 1 · steer 0
Reply
The robot is on the boost pad heading left, with its heading slightly upward (-170°) and a wall just above. This stretch straightens the heading and runs left toward the corner at (1,2), where the route turns down.

<drive>
0.15 throttle 1 steer -1
0.5 throttle 1 steer 0
0.2 throttle 1 steer 0
</drive>
5640.302.30, 2.181.85 cells/s · 7 cells to go
0.5 s · throttle 1 · steer -1
0.2 s · throttle 1 · steer -1
Reply
The robot is heading left, toward cell (1,2). The route to the dock goes left, then down the column 1 corridor, then right, up, and into the dock from below. This first stretch turns it left-to-down inside cell (1,2) at speed. The arc should keep it clear of the top wall and the gap at x = 2.

<drive>
0.5 throttle 1 steer -1
0.2 throttle 1 steer -1
</drive>
5741.001.51, 2.751.48 cells/s · 6 cells to go
0.3 s · throttle 1 · steer 0
Reply
Heading 81° with the wheel still at full left, so I'm centring the wheel and driving straight down the corridor.

<drive>
0.3 throttle 1 steer 0
</drive>
5841.301.64, 3.171.48 cells/s · 5 cells to go
0.25 s · throttle 1 · steer +0.6
0.25 s · throttle 1 · steer -0.2
Reply
<drive>
0.25 throttle 1 steer 0.6
0.25 throttle 1 steer -0.2
</drive>
5941.801.72, 3.901.48 cells/s · 5 cells to go
0.5 s · throttle 1 · steer 0
0.25 s · throttle 1 · steer -1
0.25 s · throttle 1 · steer -1
2 cut at the one-second limit
Reply
<drive>
0.5 throttle 1 steer 0
0.25 throttle 1 steer -1
0.3 throttle 1 steer -1
0.3 throttle 1 steer -0.5
</drive>
6042.801.93, 5.321.48 cells/s · 3 cells to go
0.5 s · throttle 1 · steer -1
0.3 s · throttle 1 · steer 0
1 moved into range
Reply
The route is up through the corridor in column 2 to the dock. I'll sweep right and turn up at full left steer, which should put the robot near x 2.67 heading up, inside the corridor and within the dock's 0.29 radius once it reaches y about 3.7.

<drive>
0.7 throttle 1 steer -1
0.3 throttle 1 steer 0
</drive>
6143.602.80, 4.821.48 cells/s · 1 cells to go
0.2 s · throttle 1 · steer -0.5
0.3 s · throttle 1 · steer 0
2 wall hits
Reply
The robot is at (2.80, 4.82) heading up-right at -67°. The dock is at (2.50, 3.50) and is reached through the open edge between cells (2,4) and (2,3). Steering a little left to bring the heading near straight up should move the robot toward x 2.5 before it reaches the dock.

<drive>
0.2 throttle 1 steer -0.5
0.3 throttle 1 steer 0
</drive>
6244.102.85, 4.161.22 cells/s · 1 cells to go
0.25 s · throttle 1 · steer -0.5
0.25 s · throttle 1 · steer -0.2
Reply
<drive>
0.25 throttle 1 steer -0.5
0.25 throttle 1 steer -0.2
</drive>