MICRO MOUSE BENCHMARK · DAILY MAZES

Claude Sonnet 5.5 on the daily maze of 2026-10-21

Reached the dock in 52.850 s against the median person's 24.025 s on the same maze, after 65 replies and 13 wall hits. The median of 20 people who raced it was 24.025 s (the middle half 23.68 to 25.233 s, the best 22.892 s); the game's bot takes 25.775 s. All of Claude Sonnet 5.5's runs.

RESULTReached the dock
TIME52.850 s
MEDIAN PERSON24.025 s
BOT25.775 s
SCORE45
WALL HITS13
REPLIES65
MODEL TIME18.1 min
COST$1.66 (API-equivalent)
TOKENS IN / OUT175,372 / 127,306
REQUESTS65
The maze and the path it droveSeen from above. The dashed line is the game's bot on the same maze. Each dot marks where a reply began.
Reply 1 at 0.000 sReply 2 at 0.000 sReply 3 at 0.700 sReply 4 at 1.550 sReply 5 at 2.450 sReply 6 at 3.100 sReply 7 at 4.100 sReply 8 at 5.100 sReply 9 at 6.100 sReply 10 at 7.100 sReply 11 at 8.050 sReply 12 at 9.050 sReply 13 at 10.050 sReply 14 at 11.050 sReply 15 at 11.617 sReply 16 at 12.417 sReply 17 at 12.917 sReply 18 at 13.367 sReply 19 at 14.217 sReply 20 at 15.217 sReply 21 at 16.217 sReply 22 at 17.017 sReply 23 at 18.017 sReply 24 at 19.017 sReply 25 at 19.917 sReply 26 at 20.817 sReply 27 at 21.817 sReply 28 at 22.617 sReply 29 at 23.367 sReply 30 at 23.867 sReply 31 at 24.367 sReply 32 at 25.367 sReply 33 at 26.367 sReply 34 at 26.867 sReply 35 at 27.867 sReply 36 at 28.767 sReply 37 at 29.267 sReply 38 at 30.267 sReply 39 at 31.267 sReply 40 at 32.217 sReply 41 at 32.667 sReply 42 at 33.467 sReply 43 at 34.317 sReply 44 at 35.317 sReply 45 at 36.317 sReply 46 at 36.717 sReply 47 at 37.717 sReply 48 at 38.717 sReply 49 at 39.717 sReply 50 at 40.467 sReply 51 at 40.817 sReply 52 at 41.617 sReply 53 at 42.267 sReply 54 at 43.067 sReply 55 at 44.067 sReply 56 at 45.067 sReply 57 at 45.567 sReply 58 at 46.217 sReply 59 at 46.817 sReply 60 at 47.817 sReply 61 at 48.817 sReply 62 at 49.767 sReply 63 at 50.367 sReply 64 at 51.267 sReply 65 at 52.267 s
Its pathThe bot's pathDockBoost pad

Every reply

Where the robot was when the game paused, how far it still had to go, and the controls the model sent for the next stretch, with anything the game moved, cut or skipped. The run file carries an arcade-session/1 envelope. Its input tape, in the game's own format, replays this exact run at Micro Mouse commit 87bf0cb.

ReplyClock (s)Robot (x, y in cells)Controls sent
10.001.50, 0.500.00 cells/s · 50 cells to go
0.5 s · throttle 0 · steer -1
0.5 s · throttle 0 · steer -1
Reply
Plan: the route goes left to (0,0), down to (0,1), right along row 1 to (6,1), down column 6 to (6,6), left to (4,6), up column 4 over the pad, left to (1,2), down to (1,5), right to (2,5), then up to the dock. First I pivot on the spot to face left.

<drive>
0.5 steer -1
0.5 steer -1
</drive>
20.001.50, 0.500.00 cells/s · 50 cells to go
0.5 s · throttle 0.3 · steer -1
0.2 s · throttle 0.5 · steer 0
Reply
Heading left first, since the route goes through (0,0), down to (0,1), then east along row 1.

<drive>
0.5 throttle 0.3 steer -1
0.2 throttle 0.5 steer 0
</drive>
30.701.25, 0.370.74 cells/s · 50 cells to go
0.15 s · throttle 0.5 · steer 0
0.5 s · throttle 0.4 · steer -1
0.2 s · throttle 0.4 · steer 0
2 wall hits
Reply
<drive>
0.15 throttle 0.5 steer 0
0.5 throttle 0.4 steer -1
0.2 throttle 0.4 steer 0
</drive>
41.551.15, 0.400.17 cells/s · 50 cells to go
0.5 s · throttle 0.3 · steer -1
0.4 s · throttle 0.6 · steer -1
1 wall hit
Reply
<drive>
0.5 throttle 0.3 steer -1
0.4 throttle 0.6 steer -1
</drive>
52.451.33, 0.800.88 cells/s · 50 cells to go
0.2 s · throttle 0.5 · steer -1
0.15 s · throttle 0.7 · steer 0
0.3 s · throttle 1 · steer +0.1
Reply
<drive>
0.2 throttle 0.5 steer -1
0.15 throttle 0.7 steer 0
0.3 throttle 1 steer 0.1
</drive>
63.102.00, 0.721.50 cells/s · 50 cells to go
0.25 s · throttle 1 · steer +0.2
0.5 s · throttle 1 · steer 0
0.25 s · throttle 1 · steer 0
Reply
<drive>
0.25 throttle 1 steer 0.2
0.5 throttle 1 steer 0
0.25 throttle 1 steer 0
</drive>
74.103.54, 0.621.76 cells/s · 48 cells to go
0.4 s · brake · steer 0
0.5 s · throttle 0 · steer -1
0.1 s · throttle 0 · steer -1
Reply
Moving left along row 0 is the shorter route to the dock, by my reading of the wall data. The route is row 0 to (0,0), down to row 1, right to (6,1), down column 6, left along row 6 to (3,6), up column 3, and so on to the dock. I'm facing right at speed, so I'll brake hard and then pivot left on the spot.

<drive>
0.4 throttle 1 reverse 1 brake
0.5 steer -1
0.1 steer -1
</drive>
85.103.90, 0.610.00 cells/s · 48 cells to go
0.5 s · throttle 0 · steer -1
0.5 s · throttle 0 · steer -1
Reply
Turning left in place to face the corridor heading west.

<drive>
0.5 throttle 0 steer -1
0.5 throttle 0 steer -1
</drive>
96.103.90, 0.610.00 cells/s · 48 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
107.102.80, 0.681.84 cells/s · 49 cells to go
0.45 s · brake · steer 0
0.5 s · throttle 0 · steer +1
Reply
The robot is heading left into a dead end. Row 0 only connects to the rest of the maze through column 7, so it has to turn around and go right. I'm braking to a stop first, then pivoting clockwise on the spot.

<drive>
0.45 throttle 1 reverse 1 brake
0.5 steer 1
</drive>
118.052.41, 0.710.00 cells/s · 49 cells to go
0.5 s · throttle 0 · steer +1
0.5 s · throttle 0 · steer +1
Reply
<drive>
0.5 steer 1
0.5 steer 1
</drive>
129.052.41, 0.710.00 cells/s · 49 cells to go
0.2 s · throttle 0 · steer +1
0.4 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 0 steer 1
0.4 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
1310.053.14, 0.831.73 cells/s · 48 cells to go
0.15 s · throttle 1 · steer -1
0.15 s · throttle 1 · steer 0
0.2 s · throttle 1 · steer +0.2
0.5 s · throttle 1 · steer 0
3 wall hits
Reply
The robot is close to the bottom wall of row 0 and heading slightly down, so I'm steering left briefly to lift it, then straightening out. After that I'll run right along row 0 toward column 7. The route to the dock is the long way round, down column 7 and then along row 7.

<drive>
0.15 throttle 1 steer -1
0.15 throttle 1 steer 0
0.2 throttle 1 steer 0.2
0.5 throttle 1 steer 0
</drive>
1411.054.61, 0.851.28 cells/s · 47 cells to go
0.1167 s · throttle 1 · steer -0.6
0.15 s · throttle 1 · steer +0.2
0.3 s · throttle 1 · steer 0
Reply
Heading is 4° and y is 0.85, so the robot is pressed against the bottom wall of row 0. I'll steer gently left to ease back toward the corridor centre line, then straighten.

<drive>
0.12 throttle 1 steer -0.6
0.15 throttle 1 steer 0.2
0.3 throttle 1 steer 0
</drive>
1511.625.43, 0.811.50 cells/s · 46 cells to go
0.5 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
Heading east along row 0 toward the right edge. The route goes down column 7 from here, so I'm driving straight first and will turn once I'm near x = 7.

<drive>
0.5 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
1612.426.82, 0.701.94 cells/s · 45 cells to go
0.2 s · brake · steer 0
0.3 s · throttle 0.5 · steer +1
Reply
Cell (6,0) leads right into (7,0), then the route runs down column 7. I'm braking to slow down, then turning right into the column.

<drive>
0.2 throttle 1 reverse 1 brake
0.3 throttle 0.5 steer 1
</drive>
1712.927.36, 0.690.74 cells/s · 44 cells to go
0.3 s · throttle 0 · steer +1
0.15 s · throttle 0.4 · steer +0.6
Reply
<drive>
0.3 throttle 0 steer 1
0.15 throttle 0.4 steer 0.6
</drive>
1813.377.46, 0.760.35 cells/s · 44 cells to go
0.15 s · throttle 1 · steer +0.1
0.4 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer +0.05
Reply
Heading is 74°, close to straight down, and the next stretch is down column 7. I'll ease the wheel back to centre with a slight right correction, then drive straight.

<drive>
0.15 throttle 1 steer 0.1
0.4 throttle 1 steer 0
0.3 throttle 1 steer 0.05
</drive>
1914.227.64, 1.791.76 cells/s · 43 cells to go
0.15 s · throttle 1 · steer +0.3
0.5 s · throttle 1 · steer 0
0.35 s · throttle 1 · steer 0
Reply
I'm continuing down column 7, which is open all the way to row 7. The first short segment turns the heading from 82° to about 90°, and the rest goes straight at full throttle.

<drive>
0.15 throttle 1 steer 0.3
0.5 throttle 1 steer 0
0.35 throttle 1 steer 0
</drive>
2015.227.70, 3.481.91 cells/s · 41 cells to go
0.15 s · throttle 1 · steer +0.25
0.15 s · throttle 1 · steer -0.25
0.5 s · throttle 1 · steer 0
0.2 s · throttle 1 · steer 0
Reply
Continuing down column 7 toward the bottom row, where the route turns left. I'll nudge slightly left of the wall first, then run straight.

<drive>
0.15 throttle 1 steer 0.25
0.15 throttle 1 steer -0.25
0.5 throttle 1 steer 0
0.2 throttle 1 steer 0
</drive>
2116.227.64, 5.221.89 cells/s · 39 cells to go
0.5 s · throttle 1 · steer 0
0.3 s · throttle 0 · steer 0
1 moved into range
Reply
The route to the dock goes down column 7 to the bottom row, then left along row 7. The upward route is a dead end at the top, so I'm continuing down. I'll hold the straight and then coast to shed speed before the left turn at the bottom.

<drive>
0.7 throttle 1 steer 0
0.3 throttle 0 steer 0
</drive>
2217.027.58, 6.641.15 cells/s · 38 cells to go
0.2 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer +1
0.3 s · throttle 1 · steer 0
Reply
Cell (7,6) is open only up and down, and the route from here is 38 cells whether I go up or down. I'm already heading down, so I'll continue: finish the straight into row 7, take the right turn to heading 180, then run left along row 7.

<drive>
0.2 throttle 1 steer 0
0.5 throttle 1 steer 1
0.3 throttle 1 steer 0
</drive>
2318.026.87, 7.681.48 cells/s · 36 cells to go
0.15 s · throttle 1 · steer +1
0.15 s · throttle 1 · steer -0.3
0.5 s · throttle 1 · steer 0
0.2 s · throttle 1 · steer 0
Reply
Driving left along row 7 now. I'll straighten the heading from 167° to 180° with a short right steer, then hold throttle on the straight.

<drive>
0.15 throttle 1 steer 1
0.15 throttle 1 steer -0.3
0.5 throttle 1 steer 0
0.2 throttle 1 steer 0
</drive>
2419.025.33, 7.691.75 cells/s · 35 cells to go
0.5 s · throttle 1 · steer 0
0.4 s · throttle 0 · steer 0
1 moved into range
Reply
I'm heading left along row 7 at full speed. The route needs me to reach cell (2,7), turn up into (2,6), then loop around the maze. I'll run straight for about 1 s and ease off the throttle at the end so I can brake for that turn.

<drive>
0.6 throttle 1 steer 0
0.4 throttle 0 steer 0
</drive>
2519.923.83, 7.630.89 cells/s · 33 cells to go
0.5 s · throttle 1 · steer 0
0.4 s · throttle 0.7 · steer +1
Reply
Next I'm heading left along row 7 to cell (2,7), then up the left side of the maze. The long way round is the only way in, so I'll start the right turn upward at about x 3.0.

<drive>
0.5 throttle 1 steer 0
0.4 throttle 0.7 steer 1
</drive>
2620.822.69, 7.491.04 cells/s · 32 cells to go
0.2 s · throttle 0.6 · steer +0.8
0.2 s · throttle 0.6 · steer 0
0.3 s · throttle 0.7 · steer 0
0.3 s · throttle 0.6 · steer -1
Reply
<drive>
0.2 throttle 0.6 steer 0.8
0.2 throttle 0.6 steer 0
0.3 throttle 0.7 steer 0
0.3 throttle 0.6 steer -1
</drive>
2721.822.37, 6.630.88 cells/s · 31 cells to go
0.3 s · throttle 0.6 · steer -1
0.3 s · throttle 0.8 · steer 0
0.2 s · throttle 0.8 · steer 0
Reply
Next I'm turning the robot left to head along row 6, then I'll straighten out. The route to the dock goes west to column 0, up column 0 to row 1, east along row 1, and then back around to the dock.

<drive>
0.3 throttle 0.6 steer -1
0.3 throttle 0.8 steer 0
0.2 throttle 0.8 steer 0
</drive>
2822.621.59, 6.511.18 cells/s · 30 cells to go
0.25 s · throttle 0.5 · steer 0
0.5 s · throttle 0.6 · steer +1
Reply
Next stretch: the dock is only reachable by a long loop. I'm heading left to the open left column (0,6), then turning up it.

<drive>
0.25 throttle 0.5 steer 0
0.5 throttle 0.6 steer 1
</drive>
2923.370.96, 6.430.88 cells/s · 29 cells to go
0.2 s · throttle 0.5 · steer +0.2
0.3 s · throttle 0.6 · steer 0
Reply
Heading up column 0 toward the first long leg of the route. I'm easing the wheel back from full right so the robot straightens out of its up-left slide and stays inside the column.

<drive>
0.2 throttle 0.5 steer 0.2
0.3 throttle 0.6 steer 0
</drive>
3023.870.78, 6.060.88 cells/s · 29 cells to go
0.2 s · throttle 0.7 · steer +0.3
0.3 s · throttle 0.7 · steer +0.1
Reply
Cell (0,6) is open upward, and the route to the dock runs up column 0 first. I'm straightening the heading from -111 toward -90 and keeping the speed moderate, to stay centred in column 0.

<drive>
0.2 throttle 0.7 steer 0.3
0.3 throttle 0.7 steer 0.1
</drive>
3124.370.66, 5.561.04 cells/s · 28 cells to go
0.2 s · throttle 1 · steer +0.2
0.4 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer -0.05
Reply
<drive>
0.2 throttle 1 steer 0.2
0.4 throttle 1 steer 0
0.4 throttle 1 steer -0.05
</drive>
3225.370.57, 4.041.79 cells/s · 27 cells to go
0.3 s · throttle 1 · steer +0.1
0.4 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer 0
Reply
<drive>
0.3 throttle 1 steer 0.1
0.4 throttle 1 steer 0
0.3 throttle 1 steer 0
</drive>
3326.370.51, 2.131.94 cells/s · 25 cells to go
0.5 s · throttle 0.8 · steer +1
Reply
<drive>
0.5 throttle 0.8 steer 1
</drive>
3426.870.71, 1.481.18 cells/s · 24 cells to go
0.3 s · brake · steer +1
0.5 s · throttle 0 · steer +1
0.2 s · throttle 0.6 · steer +0.4
Reply
I'm braking while holding right lock to pivot the robot round to face down column 0, then driving down it. The route to the dock runs down column 0, along the bottom, and back up through (2,4).

<drive>
0.3 throttle 1 reverse 1 brake steer 1
0.5 steer 1
0.2 throttle 0.6 steer 0.4
</drive>
3527.870.86, 1.480.46 cells/s · 24 cells to go
0.5 s · throttle 0.4 · steer -1
0.4 s · throttle 0.5 · steer -1
1 wall hit
Reply
Heading: the dock cell (2,3) can only be entered from below, and the left-hand column only leads to dead ends. So I'm taking the top route: up to row 0, right to column 6, then down. First I need to swing left through about 175° and head up while staying clear of the wall corner at x=1.

<drive>
0.5 throttle 0.4 steer -1
0.4 throttle 0.5 steer -1
</drive>
3628.771.17, 1.850.74 cells/s · 23 cells to go
0.15 s · throttle 0.7 · steer 0
0.15 s · throttle 0.7 · steer +0.4
0.2 s · throttle 0.7 · steer 0
Reply
Cell (1,1) is only open left and right, so the next stretch is along row 1 to the east. The robot is at y 1.85, right at the lower wall limit (centre must stay within 1.15 to 1.85). I'll let the wheel come off left lock and drift upward toward the row centre, using short segments.

<drive>
0.15 throttle 0.7 steer 0
0.15 throttle 0.7 steer 0.4
0.2 throttle 0.7 steer 0
</drive>
3729.271.65, 1.751.04 cells/s · 23 cells to go
0.2 s · throttle 1 · steer +0.2
0.4 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 1 steer 0.2
0.4 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
3830.273.17, 1.671.79 cells/s · 21 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
3931.275.09, 1.591.94 cells/s · 19 cells to go
0.4 s · throttle 1 · steer 0
0.35 s · throttle 0.4 · steer +1
0.2 s · throttle 0.4 · steer 0
Reply
I'm driving right along row 1 to cell (6,1), then turning down into (6,2). From there the route goes left to (5,2) and down column 5, then up the left side to the dock.

<drive>
0.4 throttle 1 steer 0
0.35 throttle 0.4 steer 1
0.2 throttle 0.4 steer 0
</drive>
4032.226.50, 1.720.60 cells/s · 18 cells to go
0.35 s · throttle 0.3 · steer +1
0.1 s · throttle 0.3 · steer 0
Reply
Next stretch: swing the heading from 45° to about 90° so the robot goes down through the gap into cell (6, 2). Then I'll turn left toward the pad corridor.

<drive>
0.35 throttle 0.3 steer 1
0.1 throttle 0.3 steer 0
</drive>
4132.676.61, 1.890.44 cells/s · 18 cells to go
0.3 s · throttle 1 · steer +0.1
0.5 s · throttle 1 · steer 0
Reply
Heading down column 6 toward row 6. The robot is already pointing about 84°, so I'll straighten the wheel and accelerate.

<drive>
0.3 throttle 1 steer 0.1
0.5 throttle 1 steer 0
</drive>
4233.476.64, 2.901.77 cells/s · 17 cells to go
0.35 s · brake · steer 0
0.5 s · throttle 0 · reverse 1 · steer 0
1 moved into range
Reply
I'm braking hard, then reversing back up so I can turn left into cell (5,2). The current heading and position don't allow a clean left turn.

<drive>
0.35 throttle 1 reverse 1 brake
0.6 reverse 1
</drive>
4334.326.65, 3.100.69 cells/s · 18 cells to go
0.2 s · brake · steer 0
0.5 s · throttle 1 · steer +0.03
0.3 s · throttle 1 · steer 0
Reply
Nearly stopped and facing down, so I'll brake out of the reverse, then drive down the column toward row 6.

<drive>
0.2 brake
0.5 throttle 1 steer 0.03
0.3 throttle 1 steer 0
</drive>
4435.326.64, 3.801.77 cells/s · 18 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
Driving straight down column 6 first. After that I'll turn left into row 6 and head along it toward (3,6).

<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
4536.326.62, 5.711.94 cells/s · 16 cells to go
0.1 s · throttle 0 · steer -0.6
0.3 s · throttle 0.3 · steer -1
Reply
<drive>
0.1 throttle 0 steer -0.6
0.3 throttle 0.3 steer -1
</drive>
4636.726.72, 6.260.90 cells/s · 15 cells to go
0.25 s · throttle 1 · reverse 1 · steer -1
0.5 s · throttle 0 · steer -1
0.25 s · throttle 0 · steer -1
Reply
Next I stop the robot, which would otherwise hit the wall ahead, and pivot left toward the west exit along row 6.

<drive>
0.25 throttle 1 reverse 1 steer -1
0.5 steer -1
0.25 steer -1
</drive>
4737.726.79, 6.310.00 cells/s · 15 cells to go
0.5 s · throttle 0 · steer -1
0.4 s · throttle 0 · steer -1
0.1 s · throttle 0.5 · steer 0
Reply
Pivoting left about 105° to face down the corridor along row 6, then starting to roll.

<drive>
0.5 steer -1
0.4 steer -1
0.1 throttle 0.5 steer 0
</drive>
4838.726.77, 6.310.23 cells/s · 15 cells to go
0.3 s · throttle 1 · steer +0.4
0.3 s · throttle 1 · steer +0.1
0.4 s · throttle 1 · steer 0
Reply
Heading left along row 6 toward (3,6), then up the column at x=3. I'm easing the wheel back to centre first so the robot straightens out toward 180 degrees.

<drive>
0.3 throttle 1 steer 0.4
0.3 throttle 1 steer 0.1
0.4 throttle 1 steer 0
</drive>
4939.725.59, 6.231.70 cells/s · 14 cells to go
0.5 s · throttle 1 · steer 0
0.25 s · throttle 0.6 · steer +1
2 wall hits1 moved into range
Reply
<drive>
0.75 throttle 1 steer 0
0.25 throttle 0.6 steer 1
</drive>
5040.474.47, 6.150.70 cells/s · 13 cells to go
0.25 s · throttle 0.5 · steer -1
0.1 s · throttle 0.5 · steer 0
Reply
Heading and wheel are both wrong for the leftward run, so I'm steering left first, with a short segment to check the result.

<drive>
0.25 throttle 0.5 steer -1
0.1 throttle 0.5 steer 0
</drive>
5140.824.34, 6.150.18 cells/s · 13 cells to go
0.4 s · throttle 0 · steer -1
0.4 s · throttle 0.7 · steer 0
1 wall hit
Reply
Pivoting left first to point the robot along the corridor toward the left (180°), then creeping forward.

<drive>
0.4 steer -1
0.4 throttle 0.7 steer 0
</drive>
5241.624.16, 6.150.89 cells/s · 13 cells to go
0.2 s · throttle 0.6 · steer 0
0.45 s · throttle 0.5 · steer +1
1 wall hit
Reply
Next I'm lining up for the left turn into column 3, then heading up it. The route is (4,6) → (3,6), up column 3 to (3,2), left to (1,2), down to (1,5), right to (2,5), then up to the dock.

<drive>
0.2 throttle 0.6 steer 0
0.45 throttle 0.5 steer 1
</drive>
5342.273.68, 6.050.74 cells/s · 12 cells to go
0.2 s · throttle 0.7 · steer +1
0.2 s · throttle 0.8 · steer 0
0.4 s · throttle 1 · steer 0
Reply
Heading up toward (3,5) while swinging the heading from about -131° back to -90°, then driving straight up.

<drive>
0.2 throttle 0.7 steer 1
0.2 throttle 0.8 steer 0
0.4 throttle 1 steer 0
</drive>
5443.073.56, 5.081.56 cells/s · 11 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 0.6 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.5 throttle 0.6 steer 0
</drive>
5544.073.55, 3.590.88 cells/s · 9 cells to go
0.4 s · throttle 1 · steer 0
0.4 s · throttle 0.6 · steer -1
0.2 s · throttle 0.8 · steer 0
Reply
Next stretch: drive up, then turn left into row 2. The route from there is left along row 2 to (1,2), down column 1 to row 5, right to (2,5), then up to the dock.

<drive>
0.4 throttle 1 steer 0
0.4 throttle 0.6 steer -1
0.2 throttle 0.8 steer 0
</drive>
5645.073.30, 2.501.18 cells/s · 8 cells to go
0.2 s · throttle 0.7 · steer -1
0.3 s · throttle 0.6 · steer 0
Reply
Heading left along row 2 first. The route is (3,2) → (2,2) → (1,2), then down column 1 to row 5, right to (2,5), and up to the dock. I'm starting with a short left turn to line up with row 2.

<drive>
0.2 throttle 0.7 steer -1
0.3 throttle 0.6 steer 0
</drive>
5745.572.87, 2.290.88 cells/s · 7 cells to go
0.45 s · throttle 0.6 · steer -1
0.2 s · throttle 0.6 · steer 0
Reply
I'm turning left toward the down opening in this cell, then I'll straighten out for the dock below.

<drive>
0.45 throttle 0.6 steer -1
0.2 throttle 0.6 steer 0
</drive>
5846.222.35, 2.380.88 cells/s · 7 cells to go
0.3 s · throttle 0.5 · steer +0.6
0.3 s · throttle 0.5 · steer 0
Reply
Heading for cell (1,2) first, then down the left column to row 5, right to (2,5), and up to the dock. This stretch straightens the heading toward 180° and runs left.

<drive>
0.3 throttle 0.5 steer 0.6
0.3 throttle 0.5 steer 0
</drive>
5946.821.96, 2.580.74 cells/s · 6 cells to go
0.25 s · throttle 0.5 · steer 0
0.5 s · throttle 0.5 · steer -1
0.25 s · throttle 0.5 · steer 0
Reply
I'm heading left to clear the wall corner at x=2, then turning down into column 1. The route from there is (1,3), (1,4), (1,5), (2,5), (2,4), then the dock at (2,3).

<drive>
0.25 throttle 0.5 steer 0
0.5 throttle 0.5 steer -1
0.25 throttle 0.5 steer 0
</drive>
6047.821.46, 3.030.74 cells/s · 5 cells to go
0.15 s · throttle 1 · steer -0.4
0.5 s · throttle 1 · steer 0
0.35 s · throttle 1 · steer 0
Reply
Heading is 98°, close to straight down, and the robot is near the centre of its column. I'm correcting the heading slightly toward 90° and driving down. The route is down to row 5, right to column 2, then up to the dock.

<drive>
0.15 throttle 1 steer -0.4
0.5 throttle 1 steer 0
0.35 throttle 1 steer 0
</drive>
6148.821.43, 4.481.80 cells/s · 4 cells to go
0.25 s · brake · steer 0
0.3 s · throttle 0.5 · steer 0
0.4 s · throttle 0.5 · steer -1
Reply
Next I brake from 1.80 cells/s, roll down into cell (1,5), then start the left turn toward (2,5). From there the route goes up through (2,4) to the dock.

<drive>
0.25 throttle 1 reverse 1 brake
0.3 throttle 0.5 steer 0
0.4 throttle 0.5 steer -1
</drive>
6249.771.49, 5.300.74 cells/s · 3 cells to go
0.3 s · throttle 0.7 · steer 0
0.3 s · throttle 0.6 · steer 0
Reply
Heading right first, then up the column through (2,5) and (2,4) to the dock.

<drive>
0.3 throttle 0.7 steer 0
0.3 throttle 0.6 steer 0
</drive>
6350.371.91, 5.670.88 cells/s · 3 cells to go
0.3 s · throttle 0.6 · steer -1
0.3 s · throttle 0.6 · steer -1
0.3 s · throttle 0.6 · steer -0.5
Reply
<drive>
0.3 throttle 0.6 steer -1
0.3 throttle 0.6 steer -1
0.3 throttle 0.6 steer -0.5
</drive>
6451.272.57, 5.630.88 cells/s · 2 cells to go
0.2 s · throttle 0.8 · steer -0.5
0.4 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
1 wall hit
Reply
Cell (2,5) opens up and left, so the route is straight up through (2,4) to the dock at (2.5, 3.5). I'm swinging the heading left to about -90, then driving straight up the corridor.

<drive>
0.2 throttle 0.8 steer -0.5
0.4 throttle 1 steer 0
0.4 throttle 1 steer 0
</drive>
6552.272.85, 4.361.31 cells/s · 1 cells to go
0.3 s · throttle 1 · steer -0.6
0.3 s · throttle 1 · steer 0
0.2 s · throttle 0.5 · steer 0
1 wall hit
Reply
Cell (2,4) is walled left and right, so the robot has to stay between x 2.15 and 2.85, and it's sitting right at the right-hand limit. I'll steer left gently to point it a little past straight up, then hold it straight so it enters the dock circle at (2.5, 3.5). The route is only about 0.9 cells at 1.31 cells/s, so this should finish the run.

<drive>
0.3 throttle 1 steer -0.6
0.3 throttle 1 steer 0
0.2 throttle 0.5 steer 0
</drive>