MICRO MOUSE BENCHMARK · DAILY MAZES

Claude Sonnet 5.5 on the daily maze of 2026-10-15

Reached the dock in 24.158 s against the median person's 16.096 s on the same maze, after 32 replies and 4 wall hits. The median of 46 people who raced it was 16.096 s (the middle half 14.68 to 18.967 s, the best 13.617 s); the game's bot takes 16.325 s. All of Claude Sonnet 5.5's runs.

RESULTReached the dock
TIME24.158 s
MEDIAN PERSON16.096 s
BOT16.325 s
SCORE67
WALL HITS4
REPLIES32
MODEL TIME6.3 min
COST$0.601 (API-equivalent)
TOKENS IN / OUT79,791 / 43,224
REQUESTS32
The maze and the path it droveSeen from above. The dashed line is the game's bot on the same maze. Each dot marks where a reply began.
Reply 1 at 0.000 sReply 2 at 0.500 sReply 3 at 1.000 sReply 4 at 1.750 sReply 5 at 2.350 sReply 6 at 3.350 sReply 7 at 4.150 sReply 8 at 4.600 sReply 9 at 5.400 sReply 10 at 6.400 sReply 11 at 7.100 sReply 12 at 7.700 sReply 13 at 8.700 sReply 14 at 9.700 sReply 15 at 10.200 sReply 16 at 10.700 sReply 17 at 11.500 sReply 18 at 12.300 sReply 19 at 13.300 sReply 20 at 14.300 sReply 21 at 15.200 sReply 22 at 15.900 sReply 23 at 16.850 sReply 24 at 17.200 sReply 25 at 17.750 sReply 26 at 18.750 sReply 27 at 19.250 sReply 28 at 19.850 sReply 29 at 20.650 sReply 30 at 21.500 sReply 31 at 22.200 sReply 32 at 23.200 s
Its pathThe bot's pathDockMud

Every reply

Where the robot was when the game paused, how far it still had to go, and the controls the model sent for the next stretch, with anything the game moved, cut or skipped. The run file carries an arcade-session/1 envelope. Its input tape, in the game's own format, replays this exact run at Micro Mouse commit 87bf0cb.

ReplyClock (s)Robot (x, y in cells)Controls sent
10.005.50, 2.500.00 cells/s · 30 cells to go
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
Starting by driving straight up the right-hand column.

<drive>
1.0 throttle 1 steer 0
</drive>
20.505.50, 2.211.16 cells/s · 30 cells to go
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
</drive>
31.005.50, 1.391.89 cells/s · 29 cells to go
0.2 s · throttle 1 · steer 0
0.45 s · throttle 0.6 · steer -1
0.1 s · throttle 0.8 · steer 0
Reply
Heading up the right column, I'll start a left turn near the top to run along row 0.

<drive>
0.2 throttle 1 steer 0
0.45 throttle 0.6 steer -1
0.1 throttle 0.8 steer 0
</drive>
41.755.28, 0.361.09 cells/s · 28 cells to go
0.2 s · throttle 0.7 · steer -1
0.2 s · throttle 1 · steer 0
0.2 s · throttle 1 · steer 0
Reply
<drive>
0.2 throttle 0.7 steer -1
0.2 throttle 1 steer 0
0.2 throttle 1 steer 0
</drive>
52.354.54, 0.301.49 cells/s · 27 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
63.352.77, 0.431.94 cells/s · 25 cells to go
0.3 s · throttle 1 · steer 0
0.2 s · throttle 0 · steer 0
0.3 s · throttle 0.5 · steer -1
Reply
Heading left along row 0 at full speed. I'll hold it briefly, then ease off before the turn down at column 1.

<drive>
0.3 throttle 1 steer 0
0.2 throttle 0 steer 0
0.3 throttle 0.5 steer -1
</drive>
74.151.55, 0.540.74 cells/s · 24 cells to go
0.25 s · throttle 0.7 · steer -1
0.2 s · throttle 0.8 · steer 0
Reply
I'm steering left to line up with the opening at the bottom of this cell. After that I'll go down and turn left toward the mud column.

<drive>
0.25 throttle 0.7 steer -1
0.2 throttle 0.8 steer 0
</drive>
84.601.33, 0.941.18 cells/s · 24 cells to go
0.3 s · brake · steer -1
0.5 s · throttle 0 · steer -1
1 moved into range
Reply
Cell (1,1) is a dead end toward the mud, so I'm taking the east route along the top row. Heading down at 1.18 cells/s, I can't curve right in time without hitting the wall. I'll brake while steering left, then pivot toward the upper right.

<drive>
0.3 brake steer -1
0.8 steer -1
</drive>
95.401.31, 1.090.00 cells/s · 23 cells to go
0.5 s · throttle 0 · steer -1
0.5 s · throttle 0 · steer -1
Reply
The route goes left through the mud column, since the top row only leads to a dead end. First I'll pivot the robot to face left.

<drive>
0.5 steer -1
0.5 steer -1
</drive>
106.401.31, 1.090.00 cells/s · 23 cells to go
0.5 s · throttle 0 · steer -1
0.2 s · throttle 1 · steer 0
1 moved into range
Reply
<drive>
0.8 throttle 0 steer -1
0.2 throttle 1 steer 0
</drive>
117.101.26, 1.080.46 cells/s · 23 cells to go
0.3 s · throttle 0.6 · steer -1
0.3 s · throttle 0.6 · steer 0
2 wall hits
Reply
The robot is heading slightly up toward the wall at y=1, so I'm turning left first to bring the heading down toward the left-hand cell. Then I'll go straight to get to column 0.

<drive>
0.3 throttle 0.6 steer -1
0.3 throttle 0.6 steer 0
</drive>
127.701.11, 1.100.17 cells/s · 23 cells to go
0.4 s · throttle 0.8 · steer 0
0.35 s · throttle 0.6 · steer -1
0.25 s · throttle 0.7 · steer 0
Reply
Heading left and down toward the mud column at x 0 to 1. After that the route runs down column 0, right along row 5, and up through (1,3) and (1,2).

<drive>
0.4 throttle 0.8 steer 0
0.35 throttle 0.6 steer -1
0.25 throttle 0.7 steer 0
</drive>
138.700.54, 1.521.04 cells/s · 22 cells to go
0.25 s · throttle 0.6 · steer -0.8
0.25 s · throttle 0.8 · steer 0
0.5 s · throttle 1 · steer 0
Reply
I'm in cell (0,1) heading 119°, pointing down and slightly left. The route goes down the mud column (0, rows 1–3) to row 5, then right along the bottom. I'll straighten to about 90° with a short left steer, then drive straight down at full throttle.

<drive>
0.25 throttle 0.6 steer -0.8
0.25 throttle 0.8 steer 0
0.5 throttle 1 steer 0
</drive>
149.700.38, 2.430.90 cells/s · 21 cells to go
0.5 s · throttle 1 · steer 0
1 moved into range
Reply
Heading nearly straight down column 0. The route runs down to row 5, across to column 5, up to row 3, left along row 3 to column 1, up to row 2, right to column 4, up to row 1, then left to the dock. This segment holds a straight line through the mud.

<drive>
1.0 throttle 1 steer 0
</drive>
1510.200.34, 2.880.90 cells/s · 21 cells to go
0.1 s · throttle 1 · steer -0.5
0.4 s · throttle 1 · steer 0
Reply
<drive>
0.1 throttle 1 steer -0.5
0.4 throttle 1 steer 0
</drive>
1610.700.33, 3.330.90 cells/s · 20 cells to go
0.15 s · throttle 1 · steer -0.4
0.15 s · throttle 1 · steer +0.2
0.5 s · throttle 1 · steer 0
Reply
I'm continuing down the left column, out of the mud. Heading is 95°, so I'm easing slightly left-of-centre back toward x 0.5 with a small steer correction, then driving straight.

<drive>
0.15 throttle 1 steer -0.4
0.15 throttle 1 steer 0.2
0.5 throttle 1 steer 0
</drive>
1711.500.44, 4.281.61 cells/s · 19 cells to go
0.4 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer -1
Reply
<drive>
0.4 throttle 1 steer 0
0.4 throttle 1 steer -1
</drive>
1812.300.77, 5.571.48 cells/s · 18 cells to go
0.2 s · throttle 1 · steer -1
0.3 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
Heading is 35° toward the floor wall at y = 6, so I'm turning left hard to level out along row 5 before it hits the wall. Then I hold a straight run to the right toward column 5.

<drive>
0.2 throttle 1 steer -1
0.3 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
1913.302.25, 5.511.73 cells/s · 16 cells to go
0.15 s · throttle 1 · steer +0.3
0.35 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
Heading is slightly upward, so I'll steer a little right to level out, then hold straight along row 5.

<drive>
0.15 throttle 1 steer 0.3
0.35 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
2014.303.92, 5.401.89 cells/s · 15 cells to go
0.4 s · throttle 1 · steer 0
0.5 s · throttle 0.8 · steer -1
1 moved into range
Reply
<drive>
0.4 throttle 1 steer 0
0.6 throttle 0.8 steer -1
</drive>
2115.205.33, 5.121.18 cells/s · 13 cells to go
0.3 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer -0.2
Reply
<drive>
0.3 throttle 1 steer 0
0.4 throttle 1 steer -0.2
</drive>
2215.905.56, 4.141.48 cells/s · 12 cells to go
0.15 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer -1
0.3 s · throttle 1 · steer 0
1 wall hit
Reply
Heading up the right edge, then turning left into row 3 along the route.

<drive>
0.15 throttle 1 steer 0
0.5 throttle 1 steer -1
0.3 throttle 1 steer 0
</drive>
2316.854.94, 3.151.16 cells/s · 10 cells to go
0.15 s · throttle 0.6 · steer -1
0.2 s · throttle 0.6 · steer 0
1 wall hit
Reply
<drive>
0.15 throttle 0.6 steer -1
0.2 throttle 0.6 steer 0
</drive>
2417.204.63, 3.150.84 cells/s · 10 cells to go
0.1167 s · throttle 0.7 · steer -0.6
0.1333 s · throttle 0.7 · steer +0.2
0.3 s · throttle 0.8 · steer 0
Reply
<drive>
0.12 throttle 0.7 steer -0.6
0.13 throttle 0.7 steer 0.2
0.3 throttle 0.8 steer 0
</drive>
2517.754.03, 3.171.18 cells/s · 10 cells to go
0.5 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
Reply
<drive>
0.5 throttle 1 steer 0
0.5 throttle 1 steer 0
</drive>
2618.752.41, 3.231.91 cells/s · 8 cells to go
0.2 s · throttle 0 · steer 0
0.3 s · throttle 0.6 · steer +1
Reply
<drive>
0.2 throttle 0 steer 0
0.3 throttle 0.6 steer 1
</drive>
2719.251.77, 3.220.88 cells/s · 7 cells to go
0.4 s · throttle 0.7 · steer +1
0.2 s · throttle 0.7 · steer 0
Reply
I'm turning right to head up into cell (1, 2), then I'll curve right toward (2, 2).

<drive>
0.4 throttle 0.7 steer 1
0.2 throttle 0.7 steer 0
</drive>
2819.851.52, 2.701.04 cells/s · 6 cells to go
0.5 s · throttle 0.5 · steer +1
0.3 s · throttle 0.6 · steer +0.5
Reply
I'm turning right toward the open row to the east of this cell. The route runs along row 2, up at column 4, then left to the dock.

<drive>
0.5 throttle 0.5 steer 1
0.3 throttle 0.6 steer 0.5
</drive>
2920.651.92, 2.290.88 cells/s · 6 cells to go
0.15 s · throttle 1 · steer 0
0.4 s · throttle 1 · steer 0
0.3 s · throttle 1 · steer +0.1
Reply
<drive>
0.15 throttle 1 steer 0
0.4 throttle 1 steer 0
0.3 throttle 1 steer 0.1
</drive>
3021.503.19, 2.281.79 cells/s · 4 cells to go
0.3 s · throttle 1 · steer 0
0.4 s · throttle 0.7 · steer -1
Reply
<drive>
0.3 throttle 1 steer 0
0.4 throttle 0.7 steer -1
</drive>
3122.204.31, 2.251.04 cells/s · 3 cells to go
0.25 s · throttle 0.6 · steer -1
0.1 s · throttle 0.7 · steer 0
0.4 s · throttle 0.6 · steer -1
0.25 s · throttle 1 · steer 0
Reply
<drive>
0.25 throttle 0.6 steer -1
0.1 throttle 0.7 steer 0
0.4 throttle 0.6 steer -1
0.25 throttle 1 steer 0
</drive>
3223.204.12, 1.471.44 cells/s · 2 cells to go
0.25 s · throttle 1 · steer -1
0.15 s · throttle 1 · steer 0
0.5 s · throttle 1 · steer 0
0.1 s · throttle 1 · steer 0
Reply
<drive>
0.25 throttle 1 steer -1
0.15 throttle 1 steer 0
0.5 throttle 1 steer 0
0.1 throttle 1 steer 0
</drive>